jellybaby Posted May 29, 2015 Author Posted May 29, 2015 So this arrived today brought of a member on here only Done under 300 miles I b fitting the turbo etc 2 moz but had to fit the mani last night Quote
jellybaby Posted June 5, 2015 Author Posted June 5, 2015 (edited) So had some Spare time This evening so fitted my pressure reg and new pressure gauge as the old one lost it oil in side I running a zisco fuel rail with braided line from the filter to the rail. Then i decided to run an 6 fittings from the rail to the fuel reg etc. I then decided to run a an return from the reg to the return pipe. Got to mount my reg now as where it is in ge pic fouled the bonnet so I will do that 2 moz Eve Here some pics    Edited April 16, 2020 by jellybaby Quote
akyakapotter Posted June 6, 2015 Posted June 6, 2015 Looking good I also made my own lines for the fuel reg looks so much getter than jubilee clips keep it up Quote
jellybaby Posted June 6, 2015 Author Posted June 6, 2015 Looking good I also made my own lines for the fuel reg looks so much getter than jubilee clips keep it up Cheers feller still got a long list of stuff to do but I will get there lol Quote
jellybaby Posted June 6, 2015 Author Posted June 6, 2015 (edited) So moved my reg to its perm place now but got to run out on of my lines over the strut but it not fouling on the bonnet so no chance of chafing   Edited April 16, 2020 by jellybaby Quote
Ollieh17 Posted June 6, 2015 Posted June 6, 2015 Such an awesome turbo kit bud! Got a bargain too ;). Really do miss it! Best lf luck with the rest of the build and ill get on about the doorcards Quote
jellybaby Posted June 6, 2015 Author Posted June 6, 2015 Such an awesome turbo kit bud! Got a bargain too ;). Really do miss it! Best lf luck with the rest of the build and ill get on about the doorcardsIt sure is buddy pleasure doing biz with ya and yer maybe they b delivered Monday who knows Quote
jellybaby Posted June 13, 2015 Author Posted June 13, 2015 (edited) So today I fitted my turbo to the wepr kit   Edited April 16, 2020 by jellybaby Quote
jellybaby Posted July 10, 2015 Author Posted July 10, 2015 So fitted my waste gate tonight few little bits left to do well in fact a lot left to do inside the car with fitting my apexi Avcr but following the guide still can't get it to fire up using the pin out for the ecu. Tried a diff live and Earth from radio and it came to life. So just got to take bit more time getting the right live and earth from the ecu.Got to make a panel that will house my delfi controller and apexi display etc. Quote
jellybaby Posted July 16, 2015 Author Posted July 16, 2015 (edited) So today I had the day to my self so I tackled the sump replacement which was easy enough and didn't take any pics of it as I left my phone on charge. After I did the sump I went about fitting my jap speed exhaust was a pain doing it on ta own but my trusty jack was at hand lol. Also I had to cut down the exhaust rubber for the back box as it was to wide to go through the hanger      Edited April 16, 2020 by jellybaby Quote
whitestar Posted July 16, 2015 Posted July 16, 2015 Crazy turbo setup! Does your exhaust have a flexi part at all? My fujitsubo power getter has an anoying flange that keeps hitting on stuff. It's like 2cm lower than rest of the car. I'd really like to come up with a solution with that. Quote
akyakapotter Posted July 16, 2015 Posted July 16, 2015 Where did you get the sump done to I'd like to get one done for mine. Quote
jellybaby Posted July 17, 2015 Author Posted July 17, 2015 (edited) Crazy turbo setup! Does your exhaust have a flexi part at all? My fujitsubo power getter has an anoying flange that keeps hitting on stuff. It's like 2cm lower than rest of the car. I'd really like to come up with a solution with that. Cheers and yer it has a flexi just after where it mounts to the down pipe. I no I got to heat wrap the pipe that goes over the rear axel as they always bang lol.And I brought the sump off socks Think race Tech did it so maybe have a word with him Edited July 17, 2015 by jellybaby Quote
jellybaby Posted August 8, 2015 Author Posted August 8, 2015 so today I fort I would get on with a few bits ie fit my pollybushed bottom arms new bottom ball joints and track rod ends. however this didn't go to plan as when removing the hub I noticed both front wheel bearing have collapsed so need to be replaced more bloody expense. so I fort I no I will fit my hdi front mount well that didn't go to plan to due to it being to big for me genuine liversports front bumper which pissed me off even more as now have to get a custom front mount made which will cost a few £££ quid so now I got to sell my hdi front mount kit so that will be put in the for sale section asap. this car is trying my patience I still got to pay for the re spray and repair other bits at the body shop. then once that's done got to pay least few £££ for a full map. I am at the cross roads now if I going to carry on or decide to quit and just sell everything which then I would not get bk near anything I paid for it all as people are to tight. or do I sit on it all save like mad and have a 350 bhp glanza toy at the end of it Quote
jellybaby Posted September 15, 2015 Author Posted September 15, 2015 (edited) Well been quite for a While sorting stuff out etc brought a new Bonnet yesterday at a bargain price  Car booked In for spray on my birthday. This weekend I be fitting my new rear discs and pads front Hubs new bottom poliy bushed bottom arms new ball joints and track road ends and anti lift kit Edited April 16, 2020 by jellybaby Quote
Essexglanza Posted September 15, 2015 Posted September 15, 2015 Wow, this is a labour of love, been an ongoing project for you then.Got all the right bits tho so fair play, keep up the good work and sure it will be roadworthy very soon 👍 Quote
jellybaby Posted September 16, 2015 Author Posted September 16, 2015 Wow, this is a labour of love, been an ongoing project for you then.Got all the right bits tho so fair play, keep up the good work and sure it will be roadworthy very soon 👍Yer been about 3 years so far all the work I done my self so there will be a great amount of achievement once done Quote
jellybaby Posted September 19, 2015 Author Posted September 19, 2015 (edited) So Today I fitted my bottom arms which are polly bushed and my anti lift kit which was a bitch to do. Only Got one pic as I was grumpy by then lol  Fitted my refurbed hubs with new wheel bearing and fitted my disc and pad which are red stuff ceramic  Next weekend I be fitting rear disc and pads and new bearings. Got loads of little bits now to Get done in the engine bay Got to Order my frb and Rarb that b the suspension finished. Still on The hunt for some Seats or seat for time being. Got 5 weeks before it goes for spray so it all Hands to pump to Get it running Edited April 16, 2020 by jellybaby Quote
jellybaby Posted October 4, 2015 Author Posted October 4, 2015 (edited) Today I fitted my front mount had to do a lot of cutting to my bumper As the core was huge but all done now   Edited April 16, 2020 by jellybaby Quote
jellybaby Posted October 31, 2015 Author Posted October 31, 2015 so today I went about sorting out everything in my garage to make sure I have everything for the spray. as it booked in for the 16th of this month everything I need I got I think lol just few things tho I have noticed tried fitting my drive shafts and they ant going in to the gear box for shit go in little but then stop also have to now rebuild the shafts due to all the cv boots are fucked from just old age. anyone got any tips to get troubled cups in the gearbox??? also I test fitted my liversports skirts and noticed that they don't cover the under seal of the car like to oem skirts which means I some how got to plug the holes in the seals up. this car just does not want to play ball it always had to fight me I lost the love for it today just something after another on it spose it what u get when u strip the car back to it bare bones Quote
Russleh Posted October 31, 2015 Posted October 31, 2015 Stick 2 it man. Cars like to test you lol. I had to sell my 4 paw project years Ago and although it was to fund a kid and a house I wish I had the chance to finish it so just win the battle. Lookin amazing so just keep on it. Russell Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.