andyevo Posted August 1, 2013 Share Posted August 1, 2013 Hi everybody, this here is my 1997 Glanza V.It was in a pretty bad state when I purchased the car late last year. The drive home from Tauranga to Auckland was so sketchy, the suspension was buggered, tyres where shot and it was bucketing down with rain. It was missing the charcoal cannister and a bung in the firewall, so I was getting pretty toasted from the fumes.The cars has been pretty much parked up since as I slowly get parts. The short term plan is to get coilovers to fix the dodgy suspension, new exhaust, and new seats before I get it certified and road registed. Here in New Zealand if you modify your vehicle such as fitting adjustable suspension, removal of your airbag steering wheel, or fitting aftermarket seats etc, it will have to be certified before being legal to drive on our roads. Quote Link to post Share on other sites
PaulStarletSR Posted August 1, 2013 Share Posted August 1, 2013 get more pix up mate! by the way you dont need the charcoal filter Quote Link to post Share on other sites
andyevo Posted August 1, 2013 Author Share Posted August 1, 2013 I found this whilst doing some maintenance PCV valve or spark plug? Quote Link to post Share on other sites
andyevo Posted August 1, 2013 Author Share Posted August 1, 2013 get more pix up mate! by the way you dont need the charcoal filter Yep i'm working on it Photobucket is being an ass and wont show me some of my pictures. Quote Link to post Share on other sites
andyevo Posted August 1, 2013 Author Share Posted August 1, 2013 Got some BC Golds When I installed them I rolled all four gaurds. If I was to do it again I would have of rolled them with the standard suspension on first, and not with the BC Golds on because the gaurd roller was to long to fit properly. I ended up using a soft hammer and a heat gun. Front could do with a bit more, but pretty happy with the results. Got some new rims, super happy Quote Link to post Share on other sites
maddox710 Posted August 1, 2013 Share Posted August 1, 2013 Them wheels look nice man, get some more pictures up of the whole car Quote Link to post Share on other sites
andyevo Posted August 1, 2013 Author Share Posted August 1, 2013 Hers some test fitment pics.And this is to show how the rims sit flush with the front gaurds. Quote Link to post Share on other sites
andyevo Posted August 1, 2013 Author Share Posted August 1, 2013 Sorry, forgot to put this pic up. This shows front wheel fitment... very slight poke.Once again, sorry for the multiple posts, i'm new to this. Is there a limit to the amount of images I can post up in one go? Quote Link to post Share on other sites
morgey Posted August 1, 2013 Share Posted August 1, 2013 Rims looks good, sit really nicely as well. Bet you're itching to get tyres on them!And no image limit as far as im aware bud Quote Link to post Share on other sites
andyevo Posted August 1, 2013 Author Share Posted August 1, 2013 Rims looks good, sit really nicely as well. Bet you're itching to get tyres on them!And no image limit as far as im aware bud Cheers Morgey.I actually have tyres on them now, I just don't have any pics yet. I'll get some up this weekend. Quote Link to post Share on other sites
andyevo Posted August 3, 2013 Author Share Posted August 3, 2013 I got around to sanding and painting the bonnet scoop as had an ugly red and black crackled affect when I bought it.Before:Now: I fitted a Cusco adjustable panhard rod, a Whiteline front sway bar with new droplinks and replaced worn bushes. Bought some Toyo T1R's in 195x50 R15 and had them fitted. This is what it's looking like now. My carpet was full of holes and dirt so I ripped it out along with the back seats as I plan to fit bucket seats. Ordered a HKB boss kit from RHDJapan. I'm very happy with the service from these guys. The model of b osskit is OT48 if anyone was interested.... ...and fitted a Nardi steering wheel.... ...and a TRD gear knob. Thanks for looking Quote Link to post Share on other sites
Idrees Posted August 3, 2013 Share Posted August 3, 2013 Very tidy build, good work so far. Quote Link to post Share on other sites
M.B-glanza Posted August 3, 2013 Share Posted August 3, 2013 That steering wheel looks awsum😬 Quote Link to post Share on other sites
andyevo Posted August 3, 2013 Author Share Posted August 3, 2013 Thanks guys This turned up from RHDJapan A Blitz Nur Spec RX I have a few questions about fitting it, so I will post them up in the Technical Section.Thanks for looking Quote Link to post Share on other sites
andyevo Posted December 21, 2013 Author Share Posted December 21, 2013 So it's been a while since my last update. I fitted the exhaust Painted the wiper arms, window cowl and mirror door plastics with matt black paint Got some seats fitted What a massive improvement when going around corners. I sit really low in the car now too. Thanks for looking:) Quote Link to post Share on other sites
Glanza-Ben Posted December 21, 2013 Share Posted December 21, 2013 Lovely mate Quote Link to post Share on other sites
drongo boi Posted December 21, 2013 Share Posted December 21, 2013 Looking Good Quote Link to post Share on other sites
ro55ifumi Posted December 21, 2013 Share Posted December 21, 2013 Looking Good John Quote Link to post Share on other sites
Critic Posted December 21, 2013 Share Posted December 21, 2013 Looking sweet dude, them seats though.. awesome. Quote Link to post Share on other sites
Starlet-Joshy Posted December 21, 2013 Share Posted December 21, 2013 That looks fooking lovely mate!! Quote Link to post Share on other sites
Spoon_tuned Posted December 21, 2013 Share Posted December 21, 2013 lovely dude good job Quote Link to post Share on other sites
andyevo Posted January 3, 2014 Author Share Posted January 3, 2014 Thanks for the comments guys A late Christmas pressie for myself arrived today... ...a genuine Nardi Deep Corn 330mm steering wheel and 30mm bosskit spacer. Quote Link to post Share on other sites
Jamie5414 Posted January 3, 2014 Share Posted January 3, 2014 Loving that wheel looks so smart and soft! Quote Link to post Share on other sites
andyevo Posted January 4, 2014 Author Share Posted January 4, 2014 Wheel is on... HKB 30mm bosskit fitted... The seats and steering wheel are nicely tied together now.I'm planning on doing the door cards and gear shift boot later on, as well as new carpet. Quote Link to post Share on other sites
Stu Posted January 4, 2014 Share Posted January 4, 2014 Looking good bro Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.