RichWillmore Posted February 10, 2015 Share Posted February 10, 2015 Turbo going to a new home ;') I really should put a build thread up one day, i spend 90% of my working day on here so i cant even use working too much as a benefiting factor.Where do people upload there photos too out of curiosity? Your bad luck has shown me that oil pump, water pump and other servicable bits will be replaced before final map ! Quote Link to post Share on other sites
RobSR Posted February 10, 2015 Share Posted February 10, 2015 (edited) ^ Ah you've brought the windmill have you? Fair play mate..that'll be fun. Your bits with be fine rich, the great legend that is Burwash built yours and sach looked after her. Hope you get it running again soon mate. Upload your photos to flickr if you want the quality to stay. Edited February 10, 2015 by RobSR Quote Link to post Share on other sites
RichWillmore Posted February 10, 2015 Share Posted February 10, 2015 ^ Ah you've brought the windmill have you? Fair play mate..that'll be fun.Your bits with be fine rich, the great legend that is Burwash built yours and sach looked after her.Hope you get it running again soon mate.Upload your photos to flickr if you want the quality to stay. I have indeed Rob. Yeah she is very close to being done for now, going to start building a head on the side and intake etc but not a priority atm. Anything over 300 and i will be happy with it. I will deffo upload a buildthread at some stage. Wouldnt of been able to carry on my build without the help of UKSO and its helpful members (y) Quote Link to post Share on other sites
RobSR Posted February 10, 2015 Share Posted February 10, 2015 Yea she'll clear 300 easy. Should be hitting 330 isn with a decent map. Quote Link to post Share on other sites
RichWillmore Posted February 10, 2015 Share Posted February 10, 2015 Yea she'll clear 300 easy. Should be hitting 330 isn with a decent map. Im just really not sure who i trust to map it the best. I dont care about the cost or distance, just want it to hit good figures but not 1000 miles and done job ! Quote Link to post Share on other sites
jayc-glanza17 Posted February 10, 2015 Share Posted February 10, 2015 Colin at atspeed racing based in rayleigh,Essex can map starlets..He'll mapped mine wouldn't trust anyone else.If want I can ask ya for him.. Quote Link to post Share on other sites
Charlie28 Posted February 11, 2015 Author Share Posted February 11, 2015 Pft. No mention of me delivering the engine too then haha. Should have introduced myself I guess . Hope you get your money back for the other lump mate. Ha, sorry bud!! Should of said something! Nice to meet you too Quote Link to post Share on other sites
Charlie28 Posted February 11, 2015 Author Share Posted February 11, 2015 I have indeed Rob. Yeah she is very close to being done for now, going to start building a head on the side and intake etc but not a priority atm. Anything over 300 and i will be happy with it. I will deffo upload a buildthread at some stage. Wouldnt of been able to carry on my build without the help of UKSO and its helpful members (y) If you made your own build thread you wouldn't have to clog mine up ;) Quote Link to post Share on other sites
RichWillmore Posted February 12, 2015 Share Posted February 12, 2015 If you made your own build thread you wouldn't have to clog mine up ;) Im making you look real popular here pal ;) Aha and i will do it ! Quote Link to post Share on other sites
jayc-glanza17 Posted March 2, 2015 Share Posted March 2, 2015 Any progress Charlie? Quote Link to post Share on other sites
Charlie28 Posted March 3, 2015 Author Share Posted March 3, 2015 (edited) Any progress Charlie?Yes bud! Went out and bought this needed a run around while the glanza is off the road!Audi A4 V6 quattro! Not bad for £1000! Edited March 3, 2015 by Charlie28 Quote Link to post Share on other sites
jayc-glanza17 Posted March 3, 2015 Share Posted March 3, 2015 Nice dude..4 weeks tomorrow until mines on road Quote Link to post Share on other sites
Charlie28 Posted March 3, 2015 Author Share Posted March 3, 2015 Nice dude..4 weeks tomorrow until mines on road Engine is hopefully going back in this weekend. Then just need to get myself a TD04 and have her mapped. Should be ready Quote Link to post Share on other sites
jayc-glanza17 Posted March 3, 2015 Share Posted March 3, 2015 Sweet man.. Quote Link to post Share on other sites
Charlie28 Posted March 11, 2015 Author Share Posted March 11, 2015 (edited) Fucked forged motor I got from Rob Ebbs is out now. Going to strip it down and see what i can save!Built up the standard engine from Socks and hopefully will fit this sat! Just waiting on a standard crank pulley and an inlet gasket from the lads at ID-Workz Edited March 11, 2015 by Charlie28 Quote Link to post Share on other sites
Ollieh17 Posted March 11, 2015 Share Posted March 11, 2015 Fingers crossed for the replacement engine mate Quote Link to post Share on other sites
Charlie28 Posted March 11, 2015 Author Share Posted March 11, 2015 Fingers crossed for the replacement engine mate Cheers lad. Hopefully wont run into any problems! But you never know with these cars! Quote Link to post Share on other sites
Ollieh17 Posted March 11, 2015 Share Posted March 11, 2015 Cheers lad. Hopefully wont run into any problems! But you never know with these cars!And people who sell parts for them!! Quote Link to post Share on other sites
ro55ifumi Posted March 11, 2015 Share Posted March 11, 2015 And people who sell parts for them!!Hope that was aimed at Rob Ollie??Charlie Good luck with the other engine and hopefully you will salvage something off the forged motor John Quote Link to post Share on other sites
Ollieh17 Posted March 11, 2015 Share Posted March 11, 2015 Was a pretty broad comment not aimed at anyone in particular Quote Link to post Share on other sites
aaddzz123 Posted March 11, 2015 Share Posted March 11, 2015 Was a pretty broad comment not aimed at anyone in particular Mmmmmmm sure. Quote Link to post Share on other sites
daniel_g Posted March 11, 2015 Share Posted March 11, 2015 There has been a hell of a lot of dodgey sellers and scammers punting starlet parts recently, just seems youve been a bit un lucky Charlie.Anyway good progress on this, least its not holding you back much, hope this new engine is decent and its up and running soon Quote Link to post Share on other sites
Idrees Posted March 11, 2015 Share Posted March 11, 2015 Best of luck mate, I'm sure this new engine will be spot on. Quote Link to post Share on other sites
BMX-RIG Posted March 11, 2015 Share Posted March 11, 2015 Glad to see this coming back together! Your fairly local to me so ill hopefully see this around too Quote Link to post Share on other sites
RobSR Posted March 11, 2015 Share Posted March 11, 2015 hopefully the replacement is all good mate.. if the forged lump was knocking hopefully you can save most of it and get away with a crank grind and new shells. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.