Ollieh17 Posted January 8, 2015 Share Posted January 8, 2015 After buying what HEL thought was a complete replacement for the stock hard lines, i have told them it doesnt completly replace the hard line. The specs they previously recieved were wrong and are willing to make up a complete line and stock them. As far as i know no other traders stock this.Now, if people are interested what route would they like? Follow the lines for the stock hard line? This is what i was thinking but have chucked the hard lines so have nothing to measure. Could anyone measure it up and give me a approx length? Quote Link to post Share on other sites
Whitenoize Posted January 8, 2015 Share Posted January 8, 2015 (edited) After buying what HEL thought was a complete replacement for the stock hard lines, i have told them it doesnt completly replace the hard line. The specs they previously recieved were wrong and are willing to make up a complete line and stock them. As far as i know no other traders stock this.Now, if people are interested what route would they like? Follow the lines for the stock hard line? This is what i was thinking but have chucked the hard lines so have nothing to measure. Could anyone measure it up and give me a approx length? you can get them on rhd dude I'm not sure how much they cost but that's wer I got my zep one Edited January 8, 2015 by Whitenoize Quote Link to post Share on other sites
Ollieh17 Posted January 8, 2015 Author Share Posted January 8, 2015 Pretty sure they arent complete mate, most stop just before the slave with a female fitting Quote Link to post Share on other sites
jellybaby Posted January 8, 2015 Share Posted January 8, 2015 I will try and messure up this weekend as I still have the hard line up to the flexi pipe if u can wait that long ? but tbh imo there no point in replacing the hard lines as they are more then up to the job etc and not that noticeable. really just need braided line to the slave cylinder Quote Link to post Share on other sites
Ollieh17 Posted January 8, 2015 Author Share Posted January 8, 2015 I took all mine out and chucked them which was stupid lol. i also have a abs delete kit so a matching entire clutch line would look well together Quote Link to post Share on other sites
Pete EP82 Posted January 8, 2015 Share Posted January 8, 2015 http://www.tegiwaimports.com/select-car/toyota/starlet-glanza/drivetrain/hel-braided-clutch-line-toyota-starlet-galanza-rhd.html Quote Link to post Share on other sites
Ollieh17 Posted January 8, 2015 Author Share Posted January 8, 2015 Messaged them, its not how it is in the diagram. It has a male end and a female end the same as HEL.As part no on diagram, this only replaces 31481 and 31418. I need 31481,31418 and 31482 Quote Link to post Share on other sites
jellybaby Posted January 8, 2015 Share Posted January 8, 2015 ah I just brought all the hard lines from Toyota for my abs delete just used a non abs starlet modal chassie number lol the bit I would just replace is the 31418 which is the part they supply only saves money but each to there own buddy if u can get a kit made up then u could b on a winner by becoming a supplier etc Quote Link to post Share on other sites
Socks Posted January 8, 2015 Share Posted January 8, 2015 Race-Tech Offer a full braided line. Thats where i got mine... Quote Link to post Share on other sites
Ollieh17 Posted January 8, 2015 Author Share Posted January 8, 2015 Should have kept the hardlines and could have used them as a accurate layout! Quote Link to post Share on other sites
jellybaby Posted January 8, 2015 Share Posted January 8, 2015 I get some pics mate at the weekend as all mine are still in palce etc so I can see if u want Quote Link to post Share on other sites
Ollieh17 Posted January 8, 2015 Author Share Posted January 8, 2015 Race-Tech Offer a full braided line. Thats where i got mine...Its not on their website Quote Link to post Share on other sites
Whitenoize Posted January 8, 2015 Share Posted January 8, 2015 Checked today mine goes from the slave to the master if sumone want to make them they can borrow mine for measurements etc Quote Link to post Share on other sites
Ollieh17 Posted January 8, 2015 Author Share Posted January 8, 2015 Checked today mine goes from the slave to the master if sumone want to make them they can borrow mine for measurements etcIf you could measure it and send me a photo of it that be great!! Quote Link to post Share on other sites
Whitenoize Posted January 8, 2015 Share Posted January 8, 2015 No problem mate will do it in the morning when I'm up at the car Quote Link to post Share on other sites
Ollieh17 Posted January 8, 2015 Author Share Posted January 8, 2015 Cool cheers mate Quote Link to post Share on other sites
Ollieh17 Posted January 9, 2015 Author Share Posted January 9, 2015 No problem mate will do it in the morning when I'm up at the carDid you get a chance mate? Quote Link to post Share on other sites
Whitenoize Posted January 9, 2015 Share Posted January 9, 2015 Will be at the car this afternoon mate and will measure it all up and send you a few pictures Quote Link to post Share on other sites
Ollieh17 Posted January 9, 2015 Author Share Posted January 9, 2015 Will be at the car this afternoon mate and will measure it all up and send you a few picturesSound Quote Link to post Share on other sites
JayJ Posted January 15, 2015 Share Posted January 15, 2015 A few days before Christmas I saw the "master cylinder to slave cylinder line" in HEL catalog and asked them to add it on their website, so I can order it. They even confirmed that it will replace the whole clutch line. Item arrived last week, but it only replaces the last hard line, so I sent them an email, as I wanted to return the item and get a refund as the product wasn't as described. I also added the same picture as Ollie, so they can see how the line really goes. They haven't replied to me yet, so maybe I should sent another mail. Sh*t company. Quote Link to post Share on other sites
Ollieh17 Posted January 15, 2015 Author Share Posted January 15, 2015 They replied to me to start with but have gone quiet now Quote Link to post Share on other sites
Gainzy Posted January 15, 2015 Share Posted January 15, 2015 I'd be playing HEL with them lol, had to put it in there sorry lads Quote Link to post Share on other sites
gtturbo94 Posted March 5, 2017 Share Posted March 5, 2017 sorry to bring up an old trend but i was wondering if anywhere does it yet? I noticed a leak in my hard line must have cross threaded sometime ago so before i order a replacement hard line from toyota Quote Link to post Share on other sites
Starlet__SR Posted March 5, 2017 Share Posted March 5, 2017 sorry to bring up an old trend but i was wondering if anywhere does it yet? I noticed a leak in my hard line must have cross threaded sometime ago so before i order a replacement hard line from toyota Just make your own, it's easy to do. Quote Link to post Share on other sites
JamesD89 Posted March 5, 2017 Share Posted March 5, 2017 Just make your own, it's easy to do.Ricky@race tech will make one for you. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.