Jump to content

patman

Member
 View Profile  See their activity

  • Posts

    2158

  • Joined

  • Last visited

 Content Type 

Everything posted by patman

  1. patman
    Wicked John
  2. patman
    Your welcome mate, don't forget the bung has to be welded 36inches away from turbo and have a slight angle 10 degrees think it is
  3. patman
    It's worth it John mate, I had a few bugging me on here about it aswell, saying you should get one and in the end I did, looking at the readings I had at the time I'm so glad I did aswell, and mine had just been ran in aswell at the time
  4. patman
    Fiddling about with a fpr, I would definitely say get a wideband installed, can take a bit of time getting the fueling right as you have to keep stopping and changing the fpr slightly till it's right but a wideband is worth it saves keep taking it to a rolling road
  5. patman
    I flipping did mate how bloody gutting would of been good to say hello again
  6. patman
    Awwwww kk mate have seen it before up the pease pottage meet we had few months ago only saw the back from a distance
  7. patman
    I see it now mate only read as far as the body type
  8. patman
    Yes mate that will be ok Yes mate that will be ok
  9. patman
    Only saw one white V down Brighton marina Asda next to a scooby think it was who's was that?
  10. patman
    Very gutted mate I didn't come over like you said though old bill were on it last night and being a Sunday everyone was leaving early
  11. patman
    Says 2 door but clearly looks 4 door, not sure what that's all about, awwwww now if it's just a 2e I wouldn't bother I was thinking a least a 4efe in it
  12. patman
    I didn't realise it was you JT mate dammit I was under the fly over most of the night with the just jap lot just saw the V from a distance,if I known it was you JT would of been straight over, Was you at Brighton as well Jamie or did you just go to eastbourne meet in your civic? what was Daz in aswell?
  13. patman
    To be fair it's a good project at 600 quid probably knock him down to 500 quid and do a few changes a lot of things could be sorted on this car very cheap, no one seems to think of it like that no?
  14. patman
    Also noticed a white V tonight down Asda Brighton marina next to a scooby, was down therein my GT as had a Paul walker meet down there
  15. patman
    Think it's around 180 quid for a refurb mate
  16. patman
    If you look to the left of the foot rest next to the clutch your see the ecu there, so it's like saying its behind the ashtray right in the middle there hope this makes sense
  17. patman
    That's ok John mate thankyou anyway, I will give the starlet seat bolts a try as the Subaru seats I got didn't come with any
  18. patman
    Yes I agree on that aswell
  19. patman
    Standard they run 0.6 bar or 0.65 one of two mate someone will definitely comfirm this
  20. patman
    Thanks for the reply John did you use the bolts out of the starlet seats mate to hold the seat belt clips on the Subaru seats thanks mate
  21. patman
    Still not fitted yet, should be in the next week or two as can't get there due to time and work, I'm gonna be putting my own seat belt clips on, these ones haven't got any on, I'm hoping the bolts which hold the seat belt clips on the GT seats are the same size bolt holes on the Subaru seats
  22. patman
    It's what browser your using mate had the same problem but works fine in safari that's if you have iPhone
  23. patman
    Yes mate of course
  24. patman
    Yep know where that is mate
  25. patman
    Do you think it would be worth doing the plasti gauge senario just to be on the extra safe side even though his engineer has said 0.25
×
×
  • Create New...