Jump to content

Adam M

Member
 View Profile  See their activity

  • Content Count

    148

  • Joined

  • Last visited

 Content Type 

Everything posted by Adam M

  1. Adam M
    I put the resistor into the yellow 2 wire connecter that usually plugs into the steering wheel airbag @whitenoize will that pass the m.o.t ? as mine is due soon many thanks Adam
  2. Adam M
    Hi all struggling to get rid of my airbag light bought some 3.9 ohm resistors and put them in the plug that comes out the steering wheel no joy tried resetting the srs light's using the 2 wires to earth sequence no joy can anyone tell me how to get rid of it without buying a standard wheel/airbag? many thanks on any input Adam
  3. Adam M
    I bought a 3.9 ohm resistor off Internet and put it in airbag connection (steering wheel) and hasn't turned off light? Is there a procedure to turn it off? Many thanks for any help Adam
  4. Adam M
    I have similair issue mate , random bits of smoke on downrevs or idle. have no idea why or how its getting there
  5. Adam M
    I could come , work until 5 on sundays tho =[
  6. Adam M
    What a jaw dropper! Nuts man , your nuts.. But i love it :-)
  7. Adam M
    Welcome! I'm from just past melton so pritty close Nice looking cars!
  8. Adam M
    Welcome bud! :-)
  9. Adam M
    Hey man Car looks ok! Best thing i'd say is get a completely unabused standard one and go from there I've just replaced my engine as the one that came in car had been ragged and main ends went on me They are awsome cars tho!
  10. Adam M
    I've had a good scan at the wiring seems ok but i will have a detailed look tommorow nearer to The ecu mate and i don't unfortunatly , Getting near to going to a reputable starlet mechanic and having the engine overlooked as i'm pritty new to cars hehe I greatly appreciate the help tho stu!
  11. Adam M
    Still no luck , proving a tough one to figure out
  12. Adam M
    Could be bud i'll try remove the fcd in the morning
  13. Adam M
    Ok stu that makes sense as high/low boost switch doesnt change pressure , i'll check all over dizzy thanks for the input bud And i am running 12 psi at Full boost Adam
  14. Adam M
    Hey all As title sais Whenever i start to build boost engine managment light comes on Getting fault code 12 have no idea why as the car runs absoloutly fine Only thing i dont have attached to the car since doing engine swap is this bracket with a blue hose , cant see anywhere that it fits to the engine. Can anyone shed some light? Have new leads/dizzy Starter motor whines for a sec as i start car No smoke Boost fine runs great Many thanks Adam
  15. Adam M
    How much did the sprayjob cost bud Where abouts you from? Would love to see her in person!
  16. Adam M
    Looking smart dude! Ep3 seats are comfy as hell :-D
  17. Adam M
    Car looks awsome mate! That colour is real Smart !
  18. Adam M
    Looks so good ! :-)
  19. Adam M
    I've been to a few meets all Over in it ben , maybe seen it And thanks liam
  20. Adam M
    The old engine was in car when i got it mate got car off a guy from brighton The car was in bad condition all over when i got it Ty all! Can't wait for the map!
  21. Adam M
    Thanks and yeah there not any good toyosports ones aparantley will have to get a better one and bought the new forged motor of paul parker
  22. Adam M
    Hi everyone I have been a member of UKSO for a couple months now. Thought i'd write up my little journey so far Had allot of ups and downs with the car allready but i have to say i think it's the best car i have owned/driven. I bought the car as a *forged td04 with all supporting mods* came with a receipt for 9k of work . However i was driving home one day when i pinned it past a friend and ended up chewing a main end bearing. i brought it home and started disecting the engine to find all the internals was standard aswell as bearings/hg gone and also a cracked piston. I made the decision
  23. Adam M
    Awsome to hear! There great cars , first car i have had to replace the engine and fix probably 30+ faults on but i still an in love with it more than any other car :-) , +1 to what phil said dont go ragging it untill it's mapped! :-)
  24. Adam M
    Might be a long shot but when i put my ep82 4efte in my glanza mine wouldnt start turns out my starter motor just wasn't lining up against flywheel properly, still whines and chrunches when i start her think i will have to cut the space plate off and try readjust it.
  25. Adam M
    If u max the turbo and have supporting accessories i'd imagine you would be well over 300 bhp
×
×
  • Create New...