Bean

the Na boxes have a pressed steel end casing not cast ali one I believe.

You never used to be able to run the stock trigger setup on a DTA that's why I ended up using a crank sensor, trigger wheel and Vauxhall coil pack. Same with the 3sgte I believe.

A good few years ago I had a dta s80 on my 5e. at the time it wouldn't work with the stock Toyota trigger system and I had to have a trigger wheel fitted to the crank pulley and run a crank sensor. Have they made changes to the software to allow it to run with the stock triggering system? No way would I run a dta ecu again wished I never bothered with it.

haaha yeah, buying it was the easy bit mate.

Its just sat there mate waiting for the last 7 years now I guess. haha could see prices of them shoot up this year possibly with the 25 year American import thing.

Hahaha yeah maybe you should have mate! I would probably have rebuilt my KP starlet instead by now if I didn't rebuild that car

Send me the calipers with the bits if you want mate I will rebuild them.

hahahaha that guy was a right chump wasnt he mate. The base wasnt that hard to find surely. It was stressful though! When we got home he tried it on with the price adding more onto the bill trying to tell me it didnt include vat in the price. Theres no way that guy was declaring any of the stuff he was up to. Anyway i said to him listen theres nothing extra getting added onto the price but seen as you did a good job with the car i will give you an extra tenner. He mumbled something and took it. then hounded me with messages to leave him some feedback on shipley. He did have a mint recover

Gaz might do it if you contact them.

Got this heap dropped off for the fab work on Monday with the help of my mate and his truck. Ended up having to remove the front bumper to get the car on and it still only just went on. My mate thinks the car will be done in a week so he should be bashing on with it. Hopefully have some pics soon.

Haha cheers Calum, its not the shiniest build thread with fancy rare parts getting ordered from japan ect but its real work going into it. Even if no one reads it I like that I've got a full record of the work done to the car as my memory is pretty bad. I'm gutted about my GT4 build thread though as I only had it on the GT4oc and they got hit with ransom ware and the guys never backed the forum up so ALL the data was lost, and I pretty much rebuilt the full car. So now im posting this on 3 forums! That should mitigate the chance of loosing it hopefully. Big day today, the Teg goes

Hardrace lower control arms painted Not a good pic but they were then given a light coat of autosmart black underseal The car is now back on its wheels and the interior has been stripped for the new archs fabricated and all the welding.

the new wepr kit has definetely freed the car up a bit and im no longer boost creeping and hitting fuel cut so thats good. Not aiming for anything but i have a complete plug and play emanage ultimate kit for it that will need mapped but i just never got round to it. I would probably run 1.1 bar and see what it made. Maybe i ill get it fitted at some point. Good work on the ep82 purchase! you wont regret it. I cant see a build thread for it, have you made one yet?

Yeah shes still going no issues other than the exhaust rotting through near the backbox. So i made a new bend up from 2.5" stainless, tack welded it in place on the car. not the best job as it was a bit of a rush repair. There was also a few holes in the pipe. hopefully i can keep the 5zigen system going a bit longer yet. Getting the bend somewherenear to what came off offering it up on the car checking position of everything and making sure the backbox sat where i wanted it to and nothing was catching. out of practise with the tig ive done very little in

I got back sooner than i thought we would so i got the rear trailing arms sprayed with 2 coats of black. Next im going to spray the hard race rear lower control arms to protect them as all the hard race products ive seen rust very quickly unfortunetely. i dont think the paint system they use is any good for the uk.

Yes the workshop is a right dump. I'll gunna tidy it when the teg gets out. Here's the arms And in primer. Finish doesn't need to be perfect on these as they came with a bit of underseal on from the factory i believe so i will be giving them a light coat of black stonechip i think. Im away for a few days now so no updates until i get back.

I fitted a brand new TRD short shifter on my ep85 and found it made the changes notchy I didn't like it. The old GT4 getting a mention there mate! A guy at work was asking me to take him out in it when its back on the road after winter. Hes had a mk1 sierra Cosworth since new.

Cheers guys! I just need to keep at it now. Been looking at other tegs for sale recently and theres some absolute dogs out there so think i will bash on with this one and have a good solid one at the end. And the next seized bolt building it up with weld got it moving with the grips on it but then it just seized up again after a few turns. so i ended up drilling it out but then that only worked for so much of it and then i had to use my powerful dremel type tool with a carbide burr to grind the redt of the bolt out then pick the remaining pieces out of the threads then r

Not touched this in ages. ive bought heaps of parts for it like new rear lower hard race oem style arms and hard race front upper arms, theres probably heaps more too. A guy I know used to build rally cars at M-Sport, then he set up on his own, but hes always busy. I asked him if he would do the arches on the dc2 ages back but he was booked up for most of the year so I looked else where. I gave him a shout in October/ November last year and he said he could do it but it wouldn't be until Dec/Jan. Anyway its booked in for 26th Jan, got my mate with a recovery truck booked in to take it down.

Still here, been around for a fair while now. Best thing about forums for me is the build threads, always loved a build thread.

they should be in here my old build thread. Yeah definitely go 5e. other than getting a 5e block there isn't really any extra costs other than a 3e clutch so you can fit the 4e clutch to it and I got the 3 holes drilled and tapped for the turbo oil filter housing so I could fit the studs like oem, then a 15mm spacer for the power steering bracket I think I used.

made 324bhp 2wd on a local dyno with the prop removed and 302bhp on tuning developments dyno running 4wd but the mapping was never finished and there was still improvements which could have been made. If I remember later I will post the graphs if your interested.

As soon as I let the clutch out for the first time on my 5e I knew it was the right choice, such a better drive. I ran a Vf35 at 1.5 bar and it was lag free just instant boost. If I was building another engine I wouldn't waste may time with a 4e. That's why I've got a spare 5e in the garage.

Go for the 5e its a much better drive.

Any idea where I might find a ae111 lsd morgey?