Socks

Powerflow 2.5" Exhaust System Powerflow 2.5" Exhaust System System is in very good condition. Is Louder then the Stock System and gives a fantastic tone. Power Gains. Centre Pipe has been heat wrapped. No Center Silencer. Hangers are for EP91 Fitment. only £124.95 Click here to buy now!

15" Rota GT3 Anodized Wheels Genuine Rota GT3 Anodized Wheels Popular Aftermarket Wheels for the GT Turbo/Glanza. All the wheels are straight, no buckles. All the wheels have some kerbing. Quantity: 4 Size: 15 x ? Stud Pattern: 4x100 Offset: ET?? All 4x Wheels have 195/50/15 tyres. 2x Kumho, 1x Continental & 1x Event Thanks only £274.95 Click here to buy now!

Got two in stock on jdm-do buddy!

Got a huge amount of results on here now and lots of comparable data! Keep them coming folks! Remember to fill out all the sections or your result wont get approved!

lol, do you not know what pre-facelift doorcards look like bud? There in good condition, no marks or wear...

I have some pre-facelift glanza doorcards and yes i have a drivers window switch panel...

Agree! Made a good result Nick! You've jumped from 78th in the country to 38th on the leaderboard! http://s314kba.co.uk/leaderboard/ Also, if you compare you results with those around you, you made a touch more torque over others, even others using a bit more boost! Id take torque of power anyday!

We have one in stock: http://www.jdm-ep.co.uk/index.php?main_page=product_info&cPath=124_129&products_id=697

We have one in stock! http://www.jdm-ep.co.uk/index.php?main_page=product_info&cPath=131_153&products_id=495

http://www.jdm-ep.co.uk/index.php?main_page=product_info&cPath=130_187&products_id=532

Probably! I sure hope so! Thats It! and yes my DTA will output to it via CAN... Fanx BestMate... Anyways...... Test Fit.... That picture is taken from my eye line... So its kind of perfect. Have to see what glare is like, may tilt the dash forward a bit if its an issue... Few odd bits of fabrication left. Mainly tanks... Pas Fluid Res, Oil Catch, Coolant Overflow & Washer Bottle! Front End is all built up now too! Bumper, Indicators, Lights, Wings, Bonnet is all back on! Very close now. We are going for first start on Monday! Wish us luck!

We have a fair few in stock! http://www.jdm-ep.co.uk/index.php?main_page=index&cPath=160&zenid=a1a51feba87095bc2bf869e6df3cbd47

Perfect working order... but I dont see beam or axle on there?

I have one, but I dread to think how i would even post one! Too big for a pallet...

We have a clean on in stock atm! http://www.jdm-ep.co.uk/index.php?main_page=product_info&cPath=132_158&products_id=510

Another one. That's the third in a month isn't it.

No there not... I have one Terry PM on route!"

Not major jdm player... but we got this in stock: http://www.jdm-ep.co.uk/index.php?main_page=product_info&cPath=121&products_id=866

About as good as it gets...

There isn't a best one to be used with a particular turbo... Doesn't work like that... Apexi AVC-R is considered to be the best unit out of them all though...

Ok So RaceDash2 wasnt designed to fit a Glanza.... It does JUST fit into the surround though, so I needed to get in mounted in some way... The back of the clock surround is not a flat surface, which is a pain. So i made it flat first... Then using Autocad, drew up the mounting dimensions of the racedash and mounting points. Because I dont know what other displays/gauges will be in there yet and because I need to draw the outer size/design/shape on autocad. Its been laser cut out of 4mm mdf. For the time being... The end result was: So I cut it down/finis

I like that...

We have various bumpers in stock: http://www.jdm-ep.co.uk/index.php?main_page=index&cPath=124_127

Looking good there Rob... is the alternator tension bracket on backwards? Or am i just being thick...

I know who's shell this was, the first picture gave it away! ;) Glad to see its being built back up!