siren676

Same here pc's ftw. 8 person lan party vs heaps of hard bots was awesome. Cant wait for BF3 to come out

According to this document they are M7x1.0. See item number 21636. I looked on toyodiy and found that the screws in glanzas and gt's are part number 47547-20010. http://www.sosmetalproducts.com/catalog/pages/h/132124.pdf Hope this is what you were looking for

I usually use brake cleaner to get dirty fingerprint marks off

Im doing my first track day at Pukekohe on the 23rd so will see whether i even needed to get an adjustable one.

Found it. http://www.austarletclub.com/articles/view...-sway-bar-ep82-

I'd recommend an adjustable one if you are going to be attending track days so you have the option or adjusting it if needed. Most people just leave it on the middle setting and forget about it. The whiteline rear arb's are prety easy to install. Only annoying thing is that you have to drill into the chassis rails with a fairly big drill bit. Other than that its quite easy to do. just assemble it off the car to check if all the parts are there.(mine was missing 5 nuts, 4 washers and 2 bolts) Oh and I stress "USE GREASE ON THE BUSHES" i didnt when I installed mine and it made horrible squeak

Probably wash the car as it got dirty at the drags

Holy hell. This is what i have to look forward to when I get a girlfriend??? Screw that, im sticking to working on cars. Good luck in the future mate

Edit found a better pic. I have a higher res one if needed.

PICS OR IT DOESNT EXIST

Dust cover in the 3rd pic looks like its bent towards the disk.

Before Now

Mine sounds like a big rock hitting the wheel well

No probs man. I'd say the hardest part will be getting a flange made up for the 2-1 section. Other than that just find some mandrel bent pipes that are the same diameter as the top section and you should be sorted. Good luck ;)

yep, bangs again even if I havent turned right (e.g 2x90º left turns). Im thinking it is the lower arm bush as I even tried swapping the rear suspension over. I hate having to take corners really slow to avoid making it bang as everyone looks at you. Another possibility could be something on the rear swaybar. Do you have 1 installed? As i said before ill jack the rear up tomorrow and have a play around with a pry-bar/crowbar and see if anything is moving. Ill update you if I find anything.

I think my mums car has these. Ill see if they can be removed easily and try them on my car.

;) I have this exact same problem except it only happens when i turn hard left. I asked the question on another forum and they said that it could either be shocks or lower arm bush. I have replaced the springs and shocks and its still making the noise. ;) Ill jack the car up tomorrow and have a good look and see if the bushes need replacing. Is your problem just 1 loud bang or multiple?

The pipes seem to have been press bent and the end section where the 2 pipes join seems a bit dodgy.

Picked up the brakes today and some of the bolts were seized and the pads were the wrong size so im taking them back tomorrow and exchanging them for another set. I compared them to my current brakes and the only difference that I could see was that the pad holders were about 5-7mm taller to be able to take the bigger disk.

The silver bit is actually the heat shield mine didnt come with it. If you can wait about 10 mins ill jack the car up and take a pic of mine.

Im running that same manifold on my 4e, are you trying to find the 2-1 piece?(silver part in pic) Pic taken from google I managed to find it at a wreckers but it would probably be better to get it made up as the section where the 2 pipes join to 1 looks a bit restrictive/badly made I can take some pics of mine if you want

I checked toyodiy and it seems that gt's, glanza's and paseo's all have the same calipers (even the 98 spec glanza). Ill be picking up the setup this week and will report back whether it works or not. Cant wait to get rid of the pitiful 238mm disks

What? I thought we were winding the clocks back an hour e.g 9am becomes 8am

Do you have the other 3 center caps?

Im going to be doing a front brake upgrade soon and have found a gt brake setup and want to know if they will fit. I know that the abs is detected from the cv joint so im hoping the setup will just be a straight swap. Anyone know anything about this?