Jump to content

akyakapotter

Moderator
 View Profile  See their activity

  • Content Count

    9766

  • Joined

  • Last visited

 Content Type 

Everything posted by akyakapotter

  1. akyakapotter
    This is what I use in my forged lump change every 3k Cheers nick.
  2. akyakapotter
    Possibly detonation has caused that. anything been changed and not had the mapped checked to suit changes ? Who mapped it ?
  3. akyakapotter
    What dose the top of the piston look like
  4. akyakapotter
    All done looks much better imo Have also decided I'd like a proper bucket seat. I've ordered a bride rail from upgarage in Japan should be here in about 3 months. Was in no rush so went with cheaper shipping.
  5. akyakapotter
    Made a start on putting carpet in harder than I was expecting but I'll get there in the end.
  6. akyakapotter
    Have you taken both off just pipe from inlet to pcv and breather on the cover.
  7. akyakapotter
    Not sure why you have 2 people normally just pop the breather filter on the cover where the catch tank front left is. Cheers nick
  8. akyakapotter
    Any pics of said rad. Cheers nick.
  9. akyakapotter
    Sure UK versions have an immobilizer and the keys have a chip in them.
  10. akyakapotter
    Click me
  11. akyakapotter
    Put up a proper FS thread please nob head.
  12. akyakapotter
    I'd stick with a starlet imo mx5 are prone to rust if I'm not mistaken.
  13. akyakapotter
    Been down to the starlet today as didn't take it to Jae and was gutted. I've moved the harnesses onto the cage. binned off the sub and put a spare wheel in its place. Need to get out and use the thing. Few issues to look into though it over filled the overflow when I took it to japfest silverstone maybe the rad at fault though will have a look into it.
  14. akyakapotter
    Looking good dude is that's your harness was attached to the cpillar bar if so that's really not a good idea.
  15. akyakapotter
    Looking good dude keep up the good work.
  16. akyakapotter
    Awesome news bud.
  17. akyakapotter
    Maybe the slave cylinder playing up try change the clutch fluid / bleed it.
  18. akyakapotter
    Check you still have the clips for the cables gearbox end I lost one on track and gave the the issues you have. Cheers nick
  19. akyakapotter
  20. akyakapotter
    OEM mount slides through it bud
  21. akyakapotter
    There is none that I no of would be a full custom job if you wanted to go wide arch. Fisk do slightly wider front wings though. Click me Cheers nick.
  22. akyakapotter
    Drivers side should be wires hidden behind the boot plastics for rear speakers was on my old na.
  23. akyakapotter
    Welcome back to starlets every one comes back. Looking forward to seeing what you do with this to make it your own. Cheers nick
  24. akyakapotter
    Possibly one of those but id say no chance of getting new now imo
  25. akyakapotter
    Never an issue with any orders from TD come next day every time I've ordered stuff from Mike and always answers the phone or phones back if he's busy.
×
×
  • Create New...