Evjatar
Member-
Content Count
27 -
Joined
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by Evjatar
-
Just check the pcv valve then mate, should let air through only 1 way. You said it yourself in your post, could be the pcv valve. Be carefull though when taking it out, the rubber washer tends to perish and break, so look closely if the bottom end hasn't dropped in the engine after removing.
-
That's a first, have ordered some stuff, all wrong. But great bulbs! Yellow bulbs are the buisiness!
-
If it's a leak, you can spray some brake cleaner around the pipes, if the idle changes, there's your faulty pipe.
-
Ah ok, looking for some front coilovers. Thanx!
-
Hi Mate Which of the coilovers has a leak? Front or rear? Thanx
-
What a wankers on the corsa forum, all jelousy because they have 5 hp and a rustbucket We know who won!
-
If you want to check, look for a black cap in front of the rearview mirror, there should be a little cap on the place where the mirror mounts. That's the remote control receiver.
-
Do you still have the headlights? Need a set really bad!
-
LOL
-
Hopefully that's all that's in the chair? Not some jizz or something :harhar:
-
Ah ok! i've bought a chair of him a few month's back!
-
She does have a nice ass then? Waarom praat je nederlands?
-
Can this also be delivered to The Netherlands? How much would the shipping be if it's possible to send it? i'm tempted! So if i'm correct, it's something you put on your seatbelt? Thanx!
-
In my ep81, 2e-e engine, highest milage 258.000 km
-
Making sure the car is warm is a good idea. Cat has to be warm to work like it should. Disconnecting the battery might also help, maybe the ecu thinks something that isn't true, like the temperature or something. Making sure all the sensors are wired in. My glanza didn't pas the mot because of emissions without a cat, fitted it and drove it nice and toasty and it was spot on! Good luck
-
could be de idle control valve needs cleaning. On the left attached to the intake manifold
-
You can use the old gearbox, but you would need the right size clutch cover. Better to stick with the glanza box. You will need the loom from a glanza and cut and solder a lot, turbo engine loom has some sensors that aren't on the na-car. Loom has to be custom made.
-
Look for a loose connection near the point where the belt rolls up. There should be a sensor or something that reads how for the seat belt is rolled out.
-
Hy Mate Any luck on making the pictures of the seat rails? Cheers
-
Get a bigger screw driver, those screws can be a bitch