JDMfreak

i ordered a touchup kit of ebay think it was around 4 or 5 pound but they seem to have sent me the wrong one its close but too much blue in it have a gander on there for a kit its cheaper anyways

mental project you have there some great work done only thing i could point out is you have you helper springs on your front coilovers on the top there meant to be on the bottom

hope somone can help here i have just recentley swapped my standard cluster non rev counter type for a set from a gls now i have the clocks in and working but im wondering will the low fuel light warning lamp now work or do i need a different type of sender for the tank as my original clocks never had this one them

i plugged them in and only the battery light worked i had to use the wiring guide above to swap the wiring around to get the engine light/oil light/and something else to work but have them all working now tell me does the petrol light function work now to let me know when its low mines low but the light didnt come on or do they need to be near empty before they come on

just wanted to ask will your wiring swap work with a set of GLS model clocks aswell are the similar to the sr clocks as im going to have anothe go at this with these clocks

there for some sort alarm that was in car

pm on route internet is acting up so might not reply asap

bargain sold a set of these for £50 didnt know what they were glwts

Looks like a great little project great transformation since you's first got it

Nice project love the wheels

ive decided gloss white im going to do the wheels same colour i painted the spoon str reps on first page. Iknow polished wheels are a nightmare to keep clean and unstained with rain,,laquer never takes to aluminium always flakes even when done 100% right,, Will be getting some proper alloy primer and a good few heavy coats aswell and a good roughing up of the wheels to give the primer something to grab too

i think thats what i might do finish sanding them and paint them white as was metioned before and maybe lower it and a set of clear indicators upfront

ok sound mate

ah dam i may go over for a week or two tried gather some goodies for my starlet

thats dan tormeys cynos he owned my black starlet before me yeah i live in ireland was born in uk though,, haha i was nearly getting the boat over for glanzajims starlet

damn haha its the last piece of the jigsaw puzzle i need

where do you see a cynos haha the thing across the road

havent that sort of cash at minute and would cost a bomb to deliver them over here

may do a photoshop now haha cheers mate if you know anyone i'll take a straight swap for a set speedlines off an SR

sorry colin the el44 whats that

while the ran pissed off i got a chance to fit the brace and two of my wheels really need to get the finger out and finish my wheels

seeing as its raining outside decided to sand my strut brace and paint the ends just need to sort out some ukso decals for the middle but need to polish it some more when i find my polishing wheel turned out very well

where did you get ht leads mine had a slight missfire say when heading up a hill and under pressure 3 gear would splutter for a few seconds then go fine when revs picked up pulled cap off and cleaned contacts indise cap and brass piece on rotor arm seems to have cured it

right may aswell update the thread ordered my strut yesterday turned up this morning colours a bit lairy but its getting re-painted 205 toyota black if the weather picks up today also my 1ao silver touch up paint arrived today looks very good colour match hopefully this should get rid of a few little marks then a light sanding of 2500 3000 grit and a buff up should see them them gone