5e colin

phill having fun :) >https://www.youtube.com/watch?v=a9LKM4amVes&feature=youtu.be

ud run into wiring difficulties if you use p9 loom in p8 better of finding a 2ee engined p8 in the scrappy and salvage al its parts ( a lot )

just for future readers the link i send is starlet knock part nr so strait fit

16£ http://www.ebay.co.uk/itm/Ignition-Knock-Detonation-Sensor-For-Toyota-Supra-Tercel-SC300-Paseo-Lexus-New-/151571569767?hash=item234a5e9c67:g:DDoAAOSw8d9Uyv~f

any links to get free download ???

yes you could test almost any sensor with a multimeter BUT you would need the tech date from al sensors otherwise its just kinda gimik sometimes they look ok on the MM and there still fucked

what a very stupid place to have the waste gate sure the owner must of heard that high pitch wissle sound of the leak

trigger is simple on the crank pulley ( aftermarket ) also depends on wish stand alone your using of how many theeet on the pulley plug depends on the boost level so probly a 7 or an 8 if your going round 350+

you need an oscilo scope or what ever its called in english not many d.i.y.ers will have to check as there fecking dear

take out the relay and put power to it and earth to the other pin now on the 2 others you will see if it opens or not thats how you test it >https://www.youtube.com/watch?v=clSSwXeezDo test if you get power on the horn itselve and if you are getting negative power from the horn button to the relay ( signal ) horn is a real simple setup

you can buy single din cupholders to slot in under the radio in jap dash cars

yes can be done but a lot of work for show gauge why not fit same way but go real wideband ??? maybie easyer if you went digital buy this cheap gauge and use its parts ?? http://www.ebay.com/itm/EPMAN-Racing-52mm-Smoked-LED-Digital-Analog-Air-Fuel-Ratio-AFR-Gauge-20-10-AFR-/121883765893?hash=item1c60d6ac85:g:SPkAAOSwvUlWsYOC&vxp=mtr

if it bothers you that much i would suggest to just turn the engine back of might be valvestem leaking oil cousing bleu pufs +rip of the turbo manifold and shine a light inside each exhaust port to see if you can spot seepige

anything lower then stock rideheigt is troublesome ha ha

there very easy to fit just unclip the circlip from the wadtegate arm and undo the 2 12mm bolts that hold the actu on OO and dont forget to pull of the vac hose instal is the opesite from taking it of as air feed to the new hks actuator fit a hose from the compressor of the turbo ( silver bit ) and plum that strait in to the nipple on the hks actu no need for electronic boost controller i never use them

logworks 3 is wat innovate says so have it downloaded and it automatically installed lm programmer to adjust the settings in the mtx gauges ep82 are you up and running with your gauges ??? what exactly is involved in the """ setup"" to connect to the gauges ?? computer recognises the converter cable then plug in the cable to the gauge and start up the llm/logworks to do your think ??

did al that and my freind whos more pc minded cant get it to work either i deleted everything and he re downloaded the driver and logwaorks etc and keeps happening its probly the cable as it has no ftdi chipset ?? this 1 has http://www.ebay.co.uk/itm/USB-to-Serial-Adapter-High-Quality-FTDI-CHIPSET-RS232-BT232-WIN-7-8-10-DB9-/151406431857?hash=item234086ce71:g:VUUAAOSwLVZV4Bf4

still no joy think i will have to buy the inovate cable

them pics do look a lot better phill some fancy upgrades nice !!

yes starlet size starlet oem camber

i made a template with a oem shock then converted that to a metal plate with marking points on so i just lay it ontop of the coil and mark out its up to you to dial the camber in if you look tru the whole thread you will see the plate in some post

yes many time is it becouse the usb to db9 has no ftdi chipset ??? maybie i have to buy 1 with the chip ????

keep on getting """" device descriptor request failed !!!

feck it it keeps on saying driver failure when i try to install brrrrwwwaaaa fecking crap

well soooooo the extract worked BUT where de feck did the file go now ???? is it automatically installed now ??