Liam_D Posted August 30, 2011 Share Posted August 30, 2011 Sounds good dude! Will it be making a apperance at JAE? Quote Link to post Share on other sites
SiCaln Posted August 31, 2011 Author Share Posted August 31, 2011 Sounds good dude! Will it be making a apperance at JAE?Course I will bro, can't wait!Also got the JAM rear bumper back on today and fitted properly bumper supports et al, also had the tracking done Quote Link to post Share on other sites
Liam_D Posted September 1, 2011 Share Posted September 1, 2011 Sawweeett! Should see you there then bro! Quote Link to post Share on other sites
SiCaln Posted September 2, 2011 Author Share Posted September 2, 2011 This took place yesterday......or tried to, got it on the dyno at TDi and mapping was done by Matt from AFR Tuning, got the throttle body changed up for an auto one with TPS, running 460cc injectors too and all the wiring and loom has been fitted and vacuum piping run for the HKS F-Con V Pro, yet as usual a problem arises...when running it they found the K24 had no nipple for vacuum on the tubby, so have had to order in some bits to fit a nipple on the inlet mani pipe before the tb. This meant my wastegate was not working after 0.8bar - nonetheless, it was mapped but only made 140bhp at the wheels, with a lovely diagonal curve, it boosts beautifully now and I barely have to move my foot which makes it seem so much faster, they reckon at 1.2-1.3 bar the 220-250bhp I'm after is easily obtainable - sadly it will have to wait til after JAE.Have also cleaned up the engine bay with some nice blue tubing and awesomely fitted the HKS ecu into the air box with all the pipe work running through the two air con holes, behind the dash so its all tidy under there and lovely, so Matt can just undo the old ecu and have access to the Fcon without the faff of pulling the dash apart again Quote Link to post Share on other sites
ollie ryan Posted September 2, 2011 Share Posted September 2, 2011 why do you need to make a nipple on the inlet mani? is that to run a vac line to the wastegate?as i run a vac line of my throttle body, it was originaly for air con and no using it ont the wastegate and it runs ok Quote Link to post Share on other sites
Nanglebadger Posted September 2, 2011 Share Posted September 2, 2011 two steps forward and one back as always brother!!!hang in there man!!!! looks mega!Phil. Quote Link to post Share on other sites
SiCaln Posted September 2, 2011 Author Share Posted September 2, 2011 why do you need to make a nipple on the inlet mani? is that to run a vac line to the wastegate?as i run a vac line of my throttle body, it was originaly for air con and no using it ont the wastegate and it runs okyea he said he needs one before the throttle body as those ones wouldn't hold pressure above spring rateand you know it Phil, end is nearly there I hopeAlso finally got a set of rear beam polybushes, hope to fire them in at sometime soon tighten up the back end lil bit Quote Link to post Share on other sites
ollie ryan Posted September 2, 2011 Share Posted September 2, 2011 yeah the one i have is before the throttle body matewill take a picture tomorrow and send it to you, see if its any good Quote Link to post Share on other sites
SiCaln Posted September 4, 2011 Author Share Posted September 4, 2011 thanks man nice one Quote Link to post Share on other sites
JAG Posted September 6, 2011 Share Posted September 6, 2011 Man that sucks!I swear your car just doesn't want to be mapped... Or maybe it just being ignorant of your needs n wants to biuld the anticipation even more for when it does get mapped and run like a monster! ;) Quote Link to post Share on other sites
Sanchez Posted September 6, 2011 Share Posted September 6, 2011 Just as Ollie says, as the k24 has no nipple for vacuum, as did my k26, then why does that have to mean you need one for the tb??Surely you need to put a nipple for vacuum as close to the turbo as possible, as i did.I bought something similar to this (mine was alot better designed though)http://www.google.co.uk/imgres?q=vacuum+ni...1t:429,r:5,s:61I then fitted it into the first piece of silicone joiner from the turbo to intercooler piping, car ran perfect. Quote Link to post Share on other sites
SiCaln Posted September 6, 2011 Author Share Posted September 6, 2011 I was told it needs to be turbo side or it can be anywhere before the throttle bodyNot much left then should be there Quote Link to post Share on other sites
WallaceGlanza Posted September 6, 2011 Share Posted September 6, 2011 I know the "nothing is simple" feeling all too well - you'll get there, just not down a straight road!Let us know how you get on with the rear beam bushes too as they're on my list to do. ;) Quote Link to post Share on other sites
Sanchez Posted September 6, 2011 Share Posted September 6, 2011 well i thought seeing as the turbo didnt have a nipple like most, td04s etc etc then i thought it would make sense to put it as close to the turbo as possible.. Quote Link to post Share on other sites
SiCaln Posted September 18, 2011 Author Share Posted September 18, 2011 still waiting on getting the final map done, but found this nifty lickle thing on in the mean timeLove the JDMs they wrap stuff very nicely lolThis is the new packagingand the code for it newThis is it out of the packaging, and in the holderand out of holderit is called the Toyota Resuceman III, and has a seatbelt cutter and hammer for breaking the windowand this is it fitted in the car Quote Link to post Share on other sites
Nanglebadger Posted September 18, 2011 Share Posted September 18, 2011 oh.my.word!WANT!Phil. Quote Link to post Share on other sites
SiCaln Posted September 18, 2011 Author Share Posted September 18, 2011 haha maybe worth asking Toyota with that part number they may still be available Quote Link to post Share on other sites
ToyotaTech15 Posted September 18, 2011 Share Posted September 18, 2011 I'll try the part number tomorow SiG Quote Link to post Share on other sites
Dan507 Posted September 18, 2011 Share Posted September 18, 2011 That's pretty cool! Want! Quote Link to post Share on other sites
Socks Posted September 19, 2011 Share Posted September 19, 2011 oooo dont let steve-gt see that. he will be throthing at the gash.... Quote Link to post Share on other sites
SiCaln Posted September 19, 2011 Author Share Posted September 19, 2011 too late told him already...he wanted lol Quote Link to post Share on other sites
WallaceGlanza Posted September 19, 2011 Share Posted September 19, 2011 Didn't know toyota made dildo's! Quote Link to post Share on other sites
ToyotaTech15 Posted September 19, 2011 Share Posted September 19, 2011 Part number discontinued as suspected,Doesn't list anywhere on the parts network here lolG Quote Link to post Share on other sites
SiCaln Posted September 19, 2011 Author Share Posted September 19, 2011 They can be found on google just by typing that number in, but think you'd have to buy from far afield, ah well I has one yay Quote Link to post Share on other sites
Steve GT Posted September 19, 2011 Share Posted September 19, 2011 too late told him already...he wanted lollol yeh you told me at JAE on the condition i stayed off Ebay deffo my next buy though this is awesome thanks for the tip off Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.