Guest cheshireglanza Posted March 31, 2010 Share Posted March 31, 2010 looking good luke pop down to garage on sat to see the new project Quote Link to post Share on other sites
lukEp Posted April 1, 2010 Author Share Posted April 1, 2010 I will do mate i've seen a car on facebook with some very bright wheel!Small update got off the phone to Dave @ TMD about 4.45pm and paid for Rear anti roll bar, Anti lift Kit, adjustable Panhard rod and some new NGK Iridium Heat range 7 plugs just waiting for them to come, I've now got the glanza to a stage i'm happy with so once all fitted and the lips and eyebrows are painted I'm not going to be doing anything for a while other than small jobs like led this and that and wire in my turbo timer and sub/amp. Quote Link to post Share on other sites
Ryan5793 Posted April 1, 2010 Share Posted April 1, 2010 so your the one who has my rear bumper lip i was dying for! looks great though mate! lip kits FTW! keep it up. Quote Link to post Share on other sites
Sparky Posted April 9, 2010 Share Posted April 9, 2010 I agree withe Gaz, black skirts would look awsome, match the lips wheels and scoop Quote Link to post Share on other sites
Bluebear Posted April 9, 2010 Share Posted April 9, 2010 Some Zenki(?) rear light clusters would finish off that back end perfectly! Quote Link to post Share on other sites
ryan lang Posted April 9, 2010 Share Posted April 9, 2010 did you spray the scoop yourself? im planning doing it when my bonnet eventually decides to arrive Quote Link to post Share on other sites
Georgie Posted April 9, 2010 Share Posted April 9, 2010 looks great i love the way boys steam ahead and buy loads of stuff and get it all done so quickly lol Quote Link to post Share on other sites
lukEp Posted April 9, 2010 Author Share Posted April 9, 2010 bloody hell replys on this thread are like buses they all come at once, problem i've got with the lips is there not black as such more purple so would be easier to just paint the lips same as the car.@ ryan, I got to swap the vent, black one for my silver one.@blue what are they any pictures? Quote Link to post Share on other sites
lukEp Posted April 9, 2010 Author Share Posted April 9, 2010 and thank georgie theres no point in twiddling ya thumbs lol. Quote Link to post Share on other sites
lukEp Posted April 9, 2010 Author Share Posted April 9, 2010 OH RIGHT!!! UPDATE! Took a few hours, a bit of grease and a few spanners but managed to fit the rear anti roll bar and adjustable panhard rod todayPictures :vvvvv:was that excited putting the stuff on I forgot to take pictures of the arb going on lol. Quote Link to post Share on other sites
Liam_D Posted April 9, 2010 Share Posted April 9, 2010 ARB Looks awesome mate, shame they dont stay looking like that for long Quote Link to post Share on other sites
anup67 Posted April 10, 2010 Share Posted April 10, 2010 how much of a difference has the RARB made, in terms of handling Quote Link to post Share on other sites
lukEp Posted April 10, 2010 Author Share Posted April 10, 2010 how much of a difference has the RARB made, in terms of handlingTBH I though it can't make as much difference as people make out but now know why they all say do the mod first as it really does pin the rear on the car to the floor, I didn't realise how much body roll my car had till it was fitted and fitting it is really easy, 2 holes to drill which are in a very accessable place, then everything else just bolts on! could easy fit one in 15-20mins np.Next time you have the money to buy one 100% get one you will not be dissapointed!!! Quote Link to post Share on other sites
Amjad Posted April 10, 2010 Share Posted April 10, 2010 Looking good dude, bet your loving it in the corners now Anup they make a huge difference combined with a rear strut brace! Quote Link to post Share on other sites
lukEp Posted May 20, 2010 Author Share Posted May 20, 2010 Small update. I've started to tart the car up engine bay and inside.you all, already know about the clocks well heres the rest smd led = winz including the hazard switch!Plus smd' the number plate lights and reverse light (not shown)Not took delivery of my ignis recaro seats and idress cooling panel but can't wait till there all sorted. Quote Link to post Share on other sites
Craig_N Posted May 20, 2010 Share Posted May 20, 2010 I wanted those seats haha only joking mate they will look awesomeI also have already seen the yellow braces they are cooooooooooolWhat happened do your new boot layout?Craig Quote Link to post Share on other sites
lukEp Posted May 20, 2010 Author Share Posted May 20, 2010 Its not finished yet mate need an amp wiring kit and a bit mor 6mm mdf first Quote Link to post Share on other sites
Amjad Posted May 20, 2010 Share Posted May 20, 2010 Wahey told you the SMD's are wicked And out of curiousity how did you get hold of them so quick? Did you need to wire in resistors for the dash one's or are they okay for just plug'n'play?Wahey told you the SMD's are wicked And out of curiousity how did you get hold of them so quick? Did you need to wire in resistors for the dash one's or are they okay for just plug'n'play? Quote Link to post Share on other sites
Dan507 Posted May 20, 2010 Share Posted May 20, 2010 Lookin good buddy, whats next? Quote Link to post Share on other sites
lukEp Posted May 20, 2010 Author Share Posted May 20, 2010 ^^ lol double post. Not got the smd side lights yet mate, just had some smd 501 already from when I did the dash so fitted them to the numberplate lights and reverse lights, the side lights at the back are just normal bulbs, they look so bright because I painted the inside of the clusters with white paint. Yes the dash smds have resistors on them to make them work they only run off 1.5v or less so a load resistor is needed.@dan just need to have bits on the car painted like my lips and eybrows and rear o/s quarter re-painted due to a bad job then nothing till next year then i'm thinking TD04 Quote Link to post Share on other sites
lukEp Posted June 2, 2010 Author Share Posted June 2, 2010 J.D tuning tow eyes woop!!! thanks Jezza.I'll fit them later when i get my car back, chris has just lent it. Quote Link to post Share on other sites
lukEp Posted June 2, 2010 Author Share Posted June 2, 2010 fitted:They don't seem to stick out as much as they do on the GT but ...... the'll save my bumper from being ripped off if i ever need towing. Time to go make me some Arrow Tow stickers Quote Link to post Share on other sites
jezza Posted June 2, 2010 Share Posted June 2, 2010 Lookin good.Your front splitter is why the front one is pretty much hidden.How about a tow sticker likeSince you can make em yourself, I could send you the dxf. Quote Link to post Share on other sites
lukEp Posted June 2, 2010 Author Share Posted June 2, 2010 Yeh the front splitter does sit rather proud of the original bumper ace all the same was just going to do thse for the stickers:plain and simples. plus i dont think flexisign uses .dfx as I had to start again with all my vectors when changing from coraldraw to flexisign 8. Thanks anyway Man Quote Link to post Share on other sites
Steve GT Posted June 2, 2010 Share Posted June 2, 2010 looks really nice luke how much were the towing eyes i cant be arsed to look lol Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.