LukeSR Posted September 16, 2009 Share Posted September 16, 2009 Haha i would of paid to see that Bet you can't wait Quote Link to post Share on other sites
Glanza_cl Posted September 16, 2009 Share Posted September 16, 2009 good to see everything coming together mate that engine bay looks mintnot to much to do now, get cracking as when it's all done it will shift something silly trust me Quote Link to post Share on other sites
200sx-Starlet-Jay Posted September 16, 2009 Author Share Posted September 16, 2009 cheers guys! yeah not much realy.. its just finding the time to do it. should have the wipers and head lights done by the end of this weekend. mite make a start on striping extra stuff. taking it one step at a time im affraid. wanna get this done asap, im gunna miss all the years ... "decent" weather at this rate!will try get some pics up soonJay Quote Link to post Share on other sites
200sx-Starlet-Jay Posted September 20, 2009 Author Share Posted September 20, 2009 Hi all. was busy at it again yesterday. managed to nail a few things off the list! we focused on the lights, and it took much longer than we originaly thought it would. the light control stalk has a circ board in it, and obv with no diagram we had to work out what it did, in order to control the lights correctly. this took a while, was just such a pain in the arse.. so didnt get anything else started anyway.. all the lights on the outside of the car.. Headlights/side lights/ indicators/ brake lights/ spoiler brake light/ number plate lights are now working off the control stalk.took a few random pics as well, on my work fone so excuse the crap quality!Lookin sorry on crappy stealies! :SLAMMED!, cant even fit a tennis ball under the front of it:Still to do:- Wire wipers up- Wire fuel/ignition/engine start up- Wire SR dials into loom- Remove last bits of sound deadening etc- Refit dash and interior- Wire all gauges and electronics in permanent.- Final check on vaccum pipes- Final check on plugs/connectors etc. make sure all that is needed it pluged in.- Fit emanage- OFF TO BE MAPPED slowly but surely Quote Link to post Share on other sites
Sparky Posted September 21, 2009 Share Posted September 21, 2009 Getting closer mate keep it up Quote Link to post Share on other sites
200sx-Starlet-Jay Posted September 21, 2009 Author Share Posted September 21, 2009 cheers mate aii cannot wait to get this done now.. takin the piss lol Quote Link to post Share on other sites
Liam_D Posted September 21, 2009 Share Posted September 21, 2009 Jay you honestly need to get this back on the road now, shes looking awesome buddy. Quick question for you mate where did you get them Vents for the fog lights from?? im needing some of them now for my new induction idea. Quote Link to post Share on other sites
200sx-Starlet-Jay Posted September 21, 2009 Author Share Posted September 21, 2009 lol cheers dude, and dont i know it!i got em ages ago from Exhausts UK, they still do em. but i have a magazine here for kit car builders with them in as well.. so if you want a gander let me know marra Quote Link to post Share on other sites
Liam_D Posted September 21, 2009 Share Posted September 21, 2009 Yes mate i would like a gander at that, ive been searching ebay for them and stuff but just cant find any anywhere!! Quote Link to post Share on other sites
200sx-Starlet-Jay Posted September 21, 2009 Author Share Posted September 21, 2009 lol yeah no worries. but just to let you know, im workin on an induction kit that i will be producing very soon and selling on here, thats not been done for the starlet at all.. so if your interested then just hold fire. should be ready for production soon.. havnt mentioned this yet its all been kept Jay Quote Link to post Share on other sites
Liam_D Posted September 21, 2009 Share Posted September 21, 2009 OOOOO interesting mate, sounds like it could be good. I reckon ill sort my new idea out for now though and then possibly be intersted in yours when the secret is revelied lol. Can you reveal anymore of the secret to me via text?? Quote Link to post Share on other sites
200sx-Starlet-Jay Posted September 21, 2009 Author Share Posted September 21, 2009 yes i can marra, or on MSN whichever is easiest Quote Link to post Share on other sites
Dean @RW-Developments Posted September 22, 2009 Share Posted September 22, 2009 your getting there slowly but surely is deffo 1 cool project Quote Link to post Share on other sites
5T4R7ET N/A Posted September 22, 2009 Share Posted September 22, 2009 keep up the good work, that front mount looks PERFECT! did you have to hack a lot away from the bumper? Quote Link to post Share on other sites
bucketep91 Posted September 22, 2009 Share Posted September 22, 2009 not long now mate eh?must have been amazing just driving it round the block after all the hard work lol. i drove mines with no seat in it before when i was fitting the red carpets lol it was f*cking murder lol Quote Link to post Share on other sites
200sx-Starlet-Jay Posted September 22, 2009 Author Share Posted September 22, 2009 @ Dean - cheers mate you any futher with yours dude? ok to come up still?@ starlet/na - cheers dude makes it worth while when people like what im doing! depends what you clas as a lot, its got a lot more left than others ive seen, but ihad to get rid of a fair bit.@ bucket - hopefully not mate, if all goes well. what you mean, why was it murder? loud? if so ive just removed all of the sound deadening in the car.. going to be very loud me thinks! best get some earmuffs!on that note, been out on it tonight and have removed the sound deadening behind the dash. suprisingly a large amount, with some considerable weight behind it.. which made me think... errrrm may be a tad louder now!Still to do:- Wire wipers up- Wire fuel/ignition/engine start up- Wire SR dials into loom- Refit dash and interior- Wire all gauges and electronics in permanent.- Final check on vaccum pipes- Final check on plugs/connectors etc. make sure all that is needed it pluged in.- Fit emanage- Full vallet everywhere... no sleep until it is spotless.- Touch up engine bay of all chips from working on it- OFF TO BE MAPPED Quote Link to post Share on other sites
ste91 Posted September 22, 2009 Share Posted September 22, 2009 lol yeah no worries. but just to let you know, im workin on an induction kit that i will be producing very soon and selling on here, thats not been done for the starlet at all.. so if your interested then just hold fire. should be ready for production soon.. havnt mentioned this yet its all been kept JayI want to hear more about this. Quote Link to post Share on other sites
200sx-Starlet-Jay Posted September 22, 2009 Author Share Posted September 22, 2009 I want to hear more about this.all i can say is ive done some research into this, and there aint really anything for NA starlets.. im hopefully going to start some fabrication of parts and start a litte company up.. and should be able to bring some decent gear to the market for the NA's.all in good time mate. if all goes well, this/next week should see the prototype of the induction kit made, then will have the final peice made. test it and then bang it up for sale.Jay Quote Link to post Share on other sites
bucketep91 Posted September 23, 2009 Share Posted September 23, 2009 murder because i couldnt see haha Quote Link to post Share on other sites
200sx-Starlet-Jay Posted September 23, 2009 Author Share Posted September 23, 2009 oh i get you now!just received loads of bungs through the post, guna check they fit tonight hopefully. they are for the rear wiper hole, so for anybody who is wanting to de wiper the back end, i have a few left over, and we can sort somthing out.they are hard plastic, and can be sprayed to the cars colour. Quote Link to post Share on other sites
200sx-Starlet-Jay Posted September 23, 2009 Author Share Posted September 23, 2009 it fits with only a slight round off of a metal file, in the bootlid. pops straight in gave the plastic a coat in 040 white, looks good. will let it dry over night and get it fitted tomorrow. pics to follow Quote Link to post Share on other sites
Russleh Posted September 23, 2009 Share Posted September 23, 2009 i could have one of them since i dont think i have a control for my rear wiper. well if i do i cant find it lol. ill wait till ya post up pics before ill know if i want to blank it though . Quote Link to post Share on other sites
200sx-Starlet-Jay Posted September 23, 2009 Author Share Posted September 23, 2009 i could have one of them since i dont think i have a control for my rear wiper. well if i do i cant find it lol. ill wait till ya post up pics before ill know if i want to blank it though .ok no worries dude if you havnt already read elsewhere... im seriously contemplating the setup im running... dont now whether or not to go Externaly wastegated, or to keep it how it is. i love the sound of the EWG, sounds awsome! wat you guys think? Quote Link to post Share on other sites
Russleh Posted September 23, 2009 Share Posted September 23, 2009 read the other post earlier and think ewg would be rad even though when i try to listen in videos i cant hear that much of a difference ( goes off to look at videos ). could go all out and swap your turbo for a td12 Quote Link to post Share on other sites
200sx-Starlet-Jay Posted September 24, 2009 Author Share Posted September 24, 2009 read the other post earlier and think ewg would be rad even though when i try to listen in videos i cant hear that much of a difference ( goes off to look at videos ). could go all out and swap your turbo for a td12 lol i know.. but if i aint careful im guna let this run away with me lol.. plan is to make it like this, then leave it and have my fun with it. then save to get another project car and keep this as a daily, or go balls out and make this into a 5efe forged up, and slam a big turbo on it and run serious boost lolgot my bung sprayed up, guna go fit it now, see what she is like pics soon Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.