lukEp Posted April 5, 2017 Share Posted April 5, 2017 Spray oven cleaner. Spray, soak for 25mins (keep topping up), rinse.Get the stuff from pound shop it's awesome. Quote Link to post Share on other sites
Chops Posted April 5, 2017 Share Posted April 5, 2017 Just soak it to death in some degreaser and pressure wash Quote Link to post Share on other sites
5e colin Posted April 6, 2017 Author Share Posted April 6, 2017 (edited) cheers guys going to get some of that oven stuff to try my japserviceparts bearing kit from ebay just arived and the quality is very good al jap made oe quality wel worth the money TBC Edited April 6, 2017 by 5e colin Quote Link to post Share on other sites
JamesD89 Posted April 6, 2017 Share Posted April 6, 2017 Have you got a link please Colin? Quote Link to post Share on other sites
5e colin Posted April 6, 2017 Author Share Posted April 6, 2017 (edited) http://www.ebay.co.uk/itm/301907061127?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT there you go got the 5th gears off had to grind down the 3 legs on the universal pullers to get them of that went wel but fucked now on getting the bearings of the input/output shafts as there special design pullers so rebuild on hold till i come up with something Edited April 6, 2017 by 5e colin Quote Link to post Share on other sites
5e colin Posted April 6, 2017 Author Share Posted April 6, 2017 (edited) wel got the input shaft bearing rear done used the tripot on the 3rd gear hub it worked happy days but fuck it no joy on the output shaft i clamp on the gear under the bearing to help push it of but it wint budge think i need a much heavier puller !!!! and bar or get specialist puller for the groove on the bearing bottom pic is of the fucker that wont come off Edited April 6, 2017 by 5e colin Quote Link to post Share on other sites
5e colin Posted April 7, 2017 Author Share Posted April 7, 2017 (edited) thats how far i got todaymade some progress today al bearings in yay happy days no way i am doing 2 boxes in 1 month bwhaaa fucking cunt of a job i forgotten how annoying it is and rookie mistakes made being so long ago sinds i did 1 ha ha opened the box 3 times in total improvised bearing press Edited April 7, 2017 by 5e colin Quote Link to post Share on other sites
5e colin Posted April 8, 2017 Author Share Posted April 8, 2017 BOLLOX BOLLOX BOLLOX i have an isseu the box locks up brrrrr fuckin cunt of a thing TBC !!!!!! Quote Link to post Share on other sites
5e colin Posted April 9, 2017 Author Share Posted April 9, 2017 so another day an other adventure i have 2 mini bals left over !!! Quote Link to post Share on other sites
5e colin Posted April 9, 2017 Author Share Posted April 9, 2017 ha fuck me what a stupid mistake the 2 balls are from the reverse gear selector shaft i put them in and put box back together and everything works perfect happy days new gearbox is ready to be fitted Quote Link to post Share on other sites
jiggaman_16 Posted April 10, 2017 Share Posted April 10, 2017 ha fuck me what a stupid mistake the 2 balls are from the reverse gear selector shaft i put them in and put box back together and everything works perfect happy days new gearbox is ready to be fitted Keep at it. Must feel good for it to be working again. Quote Link to post Share on other sites
Chops Posted April 11, 2017 Share Posted April 11, 2017 Plough through, the heartache moments and skuffed knuckles are all worth it! Quote Link to post Share on other sites
Calum122 Posted April 13, 2017 Share Posted April 13, 2017 Nice one colin great build Quote Link to post Share on other sites
5e colin Posted April 24, 2017 Author Share Posted April 24, 2017 (edited) just got my rocker back 40euros to get the 2 bungs welded on not bad Edited April 24, 2017 by 5e colin Quote Link to post Share on other sites
5e colin Posted April 27, 2017 Author Share Posted April 27, 2017 (edited) mr koni arrived today edit image file to big bummer back to fuckbucket !!! Edited April 27, 2017 by 5e colin Quote Link to post Share on other sites
5e colin Posted April 27, 2017 Author Share Posted April 27, 2017 (edited) 8mp hdr to fuckbucket lets see the quality ?? struts schopped and painted stock spring cups restored good for another few years Edited April 27, 2017 by 5e colin Quote Link to post Share on other sites
5e colin Posted April 28, 2017 Author Share Posted April 28, 2017 (edited) struts finished instaling ready to be fitted dont buy el54 paseo top mounts they wont fit there a mill to small !!!!!!!!! going to file them out a mill so i can use them anyways used my old topmounts for the time being these are the mounts from the bay Edited April 28, 2017 by 5e colin Quote Link to post Share on other sites
5e colin Posted April 29, 2017 Author Share Posted April 29, 2017 just after tracking and damping set up on the ruff stuff fecking great should of done it years ago perfect for my needs Quote Link to post Share on other sites
5e colin Posted May 5, 2017 Author Share Posted May 5, 2017 i made the conis fit the new topmounts ground them down 1mm so now these topmounts fit perfect 46£ for 2 new topmounts delivered cant go wrong http://www.ebay.co.uk/itm/FRONT-SHOCK-ABSORBER-SUPPORT-FOR-TOYOTA-CYNOS-1995-1999-OEM-48609-16230-/122201947312?hash=item1c73cdbcb0:g:mm0AAOSwB09YEPUv set myself up the oll anglegrinder replacement belt sander ha ha had to be done Quote Link to post Share on other sites
5e colin Posted July 1, 2017 Author Share Posted July 1, 2017 (edited) checked something so this needs follow up ha ha EDIT STAFF FILE SIZE STILL ONLY AT 2 CANT UPLOAD THE HD PICS SORT THIS Edited July 1, 2017 by 5e colin Quote Link to post Share on other sites
5e colin Posted July 2, 2017 Author Share Posted July 2, 2017 (edited) fuck it bucket is working again this is the next update as i seen a few topics lately about it tought i check my 1s ouch not good ha ha so time to measure my chim stack for work to come Edited July 2, 2017 by 5e colin Quote Link to post Share on other sites
5e colin Posted July 2, 2017 Author Share Posted July 2, 2017 so after getting my clearance i marked the thicknes of al chims currently in the engine doing so i was able to get most in the correct range few are still of so will have to order some new 1s to match 1 on the intake and 2 on the exhaust side intake 0.15-0.200.20-0.250.30-0.35 !!!0.15-0.200.10-0.15 !!!0.15-0.200.15-0.200.15-0.20 exhaust 0.35-0.400.35-0.400.30-0.35 0.30-0.35 0.30-0.35 0.40-0.45 !!!0.40-0.45 !!!0.35-0.40 much better then the clearance we started with engine runs smoother already will get those few done soon Quote Link to post Share on other sites
5e colin Posted July 7, 2017 Author Share Posted July 7, 2017 (edited) this is my next project few pics of the same thing but only testing to see max pixel vs the max 2gb pic upload from laptop so here we go 1 700kb 2 mega pixel 2 1.2gb 3 mega pixel 3 1.6gb 5 mega pixel 2mp comes up 129kb3mp comes up 143kb5mp comes up 170kb ?????? but when i go next step 8mp it says always size ti big thats fucked up haaaa Edited July 7, 2017 by 5e colin Quote Link to post Share on other sites
Calum122 Posted July 7, 2017 Share Posted July 7, 2017 Fuckit Bucket compresses the image anyway, so they are no longer HD Use Imgur! Much better. Looking good Colin. I'm surprised you are not using coilovers? Thought you had some Polo ones. Quote Link to post Share on other sites
5e colin Posted July 7, 2017 Author Share Posted July 7, 2017 (edited) these pics are strait from laptop no mate i went koni inserts and i love it not like coils precise steering like you know but i spend 80% on very bumpy back roads and i can adjust damping when on the back roads im on 1/4 turn away from full soft and when i enter A roads i readjust to full hard i marked my chassi legs for the ref points just waiting for the rear coils to #blow ( fc3s ) so i can go koni there to i have MUCH more grip now shes going over the bumps not down tru them my kids arnt complaining anymore ( a good thing ha ha ) car feels much more planted , heavier on the road Edited July 7, 2017 by 5e colin Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.