wickedep Posted February 21, 2015 Share Posted February 21, 2015 Good write up Rich !! looking good.. Quote Link to post Share on other sites
RobSR Posted February 21, 2015 Share Posted February 21, 2015 Nice one for finally getting it posted up. ! Quote Link to post Share on other sites
littlegreenmonster Posted February 21, 2015 Share Posted February 21, 2015 Love love love it dude Quote Link to post Share on other sites
GlanzaJ Posted February 22, 2015 Share Posted February 22, 2015 (edited) Looking good mate ! The bit about nathan Edited February 22, 2015 by GlanzaJ Quote Link to post Share on other sites
RichWillmore Posted February 23, 2015 Author Share Posted February 23, 2015 So carrying on from where i left off last week. Stopping was an issue in the Glanza. The last time it was out i actually managed to set the brakes on fire whilst showing up a bigboy Leon K1 and an Evo 6. It's all shits and giggles until someone giggles and shits. There were videos off the night floating around as you see my little pink/red starlet go flying past with all four corners BRIGHT orange and smoking. GENIUS ! I figured while it was off the road it was time to let Russ put a kit together for me as the discs that were on it may have been cracked in about 6-7 places and to top it off destoryed 3 wheel bearings LOL ... These were replaced at the same time as Brakes but i wont bore you with them pics. Heres a standard rear setup from ID-Workz who have always been spot on with delivery and the fronts are Twin Pots supplied from Russ on the forum. Quote Link to post Share on other sites
ro55ifumi Posted February 23, 2015 Share Posted February 23, 2015 Sweet build, shared a few pics on our FB page John Quote Link to post Share on other sites
RichWillmore Posted February 23, 2015 Author Share Posted February 23, 2015 Another thing that i was told stoping it from making 300 plus was the Injectors.So i saw Whitenoize was selling a set of 550's with new connectors so i bit his hand off and they arrived within a couple of days.Im still yet to fit these but i will keep you updated. Quote Link to post Share on other sites
Matt1878 Posted February 23, 2015 Share Posted February 23, 2015 Love this build.. Same turbo kit I've gone for too. Keep up the good work mate! Quote Link to post Share on other sites
RichWillmore Posted February 23, 2015 Author Share Posted February 23, 2015 Soooo i've seen loads of debates about what tyres are the best for something track/race car like. I took it upon myself to just go with money for value and listen to what alot of people have said.So i went for the Linglong's (Nankang NS2R's) actually cannot wait to try these bad mumma's out ... Im sure they wont last long but what do you expect from 120 Compound. Quote Link to post Share on other sites
RichWillmore Posted February 23, 2015 Author Share Posted February 23, 2015 So one thing with owning a death trap; Safety comes first. Couldnt resist and always wanted genuine Takatas. My boys at GSM hooked me up with these, I'll upload pictures when i've got around to fitting! Quote Link to post Share on other sites
RichWillmore Posted February 23, 2015 Author Share Posted February 23, 2015 Throughout this build so far the one thing i always said was " i dont need to buy a new turbo " guess what i did ... Heres a picture of it fitted to my mate Charlie28's car He was going to run it on his build as you can see but he who shall not be named " ROB EBBS" sold him a compeltely dud forged engine and now wont speak to him.Big thumbs down, espically as Charlie is an absolute diamond geezer. This has however provided me with an oppertunity to give this TD05-18G a go. Who knows i might even let Charlie test drive it seen as he's been a babe... Turbo was checked over by Midland Turbos (LiamD) who ive been told will voach for the turbo and the penny valve welded up for external setup Or should i say " Asbo Lag Machine " Setup ... Quote Link to post Share on other sites
RichWillmore Posted February 23, 2015 Author Share Posted February 23, 2015 Getting all excited to fit, i may have forgotten to purchase some new gaskets. That makes me a massive Penis i am fully aware.But its ready for everything to be bolted back on when they arrive thanks to ID-Workz again. Quote Link to post Share on other sites
RichWillmore Posted February 23, 2015 Author Share Posted February 23, 2015 AHA I have just remembered something quite funny but important at the same time to anybody thinking of brake upgrades and spacers etc.I brought a set of Extended Wheels studs, took the brakes and hub apart, smashed them in, all gravy. Went to put the wheels back on, only to realise the nuts i was using were closed ended and id tighten then up to the point i couldnt now get them off. It took me sometime to get some grips on them and get them off. I saw Whitenoize selling some wheels nuts and thought, THANK GOD !I sent him the money on Friday afternoon and some how they were there when i woke up Saturday lunch time. Thanks Buddy Quote Link to post Share on other sites
RichWillmore Posted February 23, 2015 Author Share Posted February 23, 2015 So this sort of brings us up to where i am atm.I have so much going on so im sure there is going to be some good updates in the very very near future. Any advice is welcome and please feel free to ask any questions. I know for a fact without this forum i wouldnt of been able to go ahead with half of the stuff i have. I'll Leave you with two little pics i took on Sat while it was actually light outside. Quote Link to post Share on other sites
RichWillmore Posted February 23, 2015 Author Share Posted February 23, 2015 Sweet build, shared a few pics on our FB page John Thanks Pal, Lots more to come. Feel free to pinch any pictures you want.I will be getting a shoot together with a good friend of mine once its out and about.Looking good mate ! The bit about nathan Ha his old Insta picture nearly made me shit myself with laughter.Brillant. Saw you asbo'ing it up on Saturday!Where the hell you get them plastic windows from Plastics 4 Performance mate.Not cheap i can tell you that, but if your going down that route then maybe worth while Thats Bloody beautiful, Good work boss James Thankyou Nice one for finally getting it posted up. ! Blame Charlie Gallow, he's a proper pest Quote Link to post Share on other sites
Ollieh17 Posted February 23, 2015 Share Posted February 23, 2015 Bloody hell not wrong about the windows, just had a quick look! Suprised none ofthe traders have jumped on to sourcing these Quote Link to post Share on other sites
RichWillmore Posted February 23, 2015 Author Share Posted February 23, 2015 Bloody hell not wrong about the windows, just had a quick look! Suprised none ofthe traders have jumped on to sourcing these Haha alot of people do windows themselves but i wanted moulded rear etc Quote Link to post Share on other sites
jayc-glanza17 Posted February 23, 2015 Share Posted February 23, 2015 I run a similar turbo pal..Mine was in fact less Laggy then my stock td05.You'll love it tho fella..Hope mines be out in april Quote Link to post Share on other sites
RichWillmore Posted February 23, 2015 Author Share Posted February 23, 2015 I run a similar turbo pal..Mine was in fact less Laggy then my stock td05.You'll love it tho fella..Hope mines be out in april Really, thats interesting.Im hoping to make a good figure, but more importantly get it down.The diff and tyres should hopefully keep me planted for now. I've got some finishing up to do on mine then im going to book in with TD and arrange that. Gutted mine probably wont be done before the rolling road day, that would have been a fun day out! But trust me when i say i will be very much involved in anything UKSO and Starlet related in the future Quote Link to post Share on other sites
Whitenoize Posted February 23, 2015 Share Posted February 23, 2015 AHA I have just remembered something quite funny but important at the same time to anybody thinking of brake upgrades and spacers etc.I brought a set of Extended Wheels studs, took the brakes and hub apart, smashed them in, all gravy. Went to put the wheels back on, only to realise the nuts i was using were closed ended and id tighten then up to the point i couldnt now get them off. It took me sometime to get some grips on them and get them off. I saw Whitenoize selling some wheels nuts and thought, THANK GOD !I sent him the money on Friday afternoon and some how they were there when i woke up Saturday lunch time. Thanks Buddy I don't even know how Royal Mail pulled that one off I only posted them around 4 fri afternoon and it's not like your only up the road lol glad your happy with them anyway dude keep up the good work Quote Link to post Share on other sites
Rock-Kick-Ass Posted February 23, 2015 Share Posted February 23, 2015 nice build man, look forward to seen some vids of this car Quote Link to post Share on other sites
mikey4410 Posted February 23, 2015 Share Posted February 23, 2015 extremely nice build here.love that picture of the flame from side exit. savage. Quote Link to post Share on other sites
RobSR Posted February 23, 2015 Share Posted February 23, 2015 Turbo was checked over by Midland Turbos (LiamD) who ive been told will voach for the turbo and the penny valve welded up for external setup Or should i say " Asbo Lag Machine " Setup ... 05-18G isn't all that bad on a 4e. Its just pussys who moan about it. you'll be hitting 1.6bar by 4.5k on a decent map. Just drive it right, in the right gear and it'll be all good. Quote Link to post Share on other sites
RichWillmore Posted February 24, 2015 Author Share Posted February 24, 2015 nice build man, look forward to seen some vids of this car Thanks, i will be sure to get some up ! extremely nice build here.love that picture of the flame from side exit. savage. I wasnt expecting it, iterally just blipped the throttle when it got to temp. Thats the only one i got a picture of the rest were actually bigger and blue'r aha 05-18G isn't all that bad on a 4e. Its just pussys who moan about it. you'll be hitting 1.6bar by 4.5k on a decent map. Just drive it right, in the right gear and it'll be all good. Yeah im expecting it to be around the same as it already is tbh just a little bit more agressive.JUst want it running nicely Quote Link to post Share on other sites
Ollieh17 Posted February 24, 2015 Share Posted February 24, 2015 Got any videos of the exhaust? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.