Jump to content

Bluebear

Club Member
 View Profile  See their activity

  • Content Count

    2920

  • Joined

  • Last visited

 Content Type 

Everything posted by Bluebear

  1. Bluebear
    I remember having a few convos with him back in the day when ToyTuning were still decent, seemed like a straight lad. Obviously in the next few years we know that wasn't the case
  2. Bluebear
    I think, without going ext w/g or for a turbo with a bigger internal w/g, your only other option would be to try porting it more, or restricting your intake.
  3. Bluebear
    aka 'dat rattle tho <3' club Soon to have one on mine too, even if power figures/potential are nowhere near those of shaun's!! Used to have one yonks ago but it died a death
  4. Bluebear
    Brilliant work mate!
  5. Bluebear
    Looks like Buddyclub P1's or at least a replica of them. Badly painted; they're usually one uniform colour.
  6. Bluebear
    I thought this was just going to be a daily/weekend car, not a track build! Be good to see what you do! Do you two still have that rear IRS setup lying around too? ;)
  7. Bluebear
    I've used (for two years now) a used TiAL F38 that came with a second-hand Zisco CT9 mani kit that I got and had no problems with it whatsoever. It does however rattle a little bit, apparently the piston is a little loose, but it still seems to hold boost fine. Might actually try the lapping when I get the car back just to be sure, cheers for the vid Mikey!
  8. Bluebear
    Mate. Yes. Such a lovely looking wheel!!
  9. Bluebear
  10. Bluebear
    Yay Nick!
  11. Bluebear
    I use a full set of TRD mounts and they're nice. Ultimately though, they are still rubber so they'll still degrade. I think most people poly the rearmost mount and leave the other two rubber for the best balance.
  12. Bluebear
    Phil is selling a set of 15" Sparco Crimson NSII for £320! Lovely looking wheels. http://www.ukstarletowners.com/topic/88264-now-on-ebay-sparco-crimson-ns2-15-alloys-jdm/
  13. Bluebear
    Heater matrix or rad? And rust sucks, where is that? Door?
  14. Bluebear
    I need to know where this bodyshop is! Just for... research purposes As I said on FB mate, she is an absolute minter. I'm sure you'll do a cracking job of looking after her. Also: ♫Waaaatch your back!! Watch yo, watch yo, watch yo back♫
  15. Bluebear
    As far as I'm aware, no data exists for the cars pre-1995, so all the testers are obliged to do is a fast idle test iirc.
  16. Bluebear
    Winnnn! Be good to see you there! Just added you on FB and noticed you already know Riky, Ben, Liberato, small world!
  17. Bluebear

    Yaris WRC

    Bluebear replied to JayJ's topic in Video Gallery

    dat noise tho.
  18. Bluebear
    I think it's the input shaft. Currently having the same issue on mine. Clutch is now off and it looks fine, but there's corrosion on the input shaft. Gonna see what happens when it gets cleaned up.
  19. Bluebear
    Winner, I always used to get disorientated finding their old place
  20. Bluebear
    Didn't realise they're in a new unit now! Is it the same place?
  21. Bluebear
    This is the one you're after mate, fairly distinctive looking. It's off the bugeye Corolla. If I remember rightly, it sacrifices a bit of torque for freer revs.
  22. Bluebear
    I thought that was a Mitsi?
  23. Bluebear
    Welcome to the forum mate! First off, one of the best mods you can do is to get hold of the Corolla inlet manifold, much more free-flowing than the standard item. As for the gearbox, aftermarket LSDs usally come up for sale, they should be able to drop straight into your current gearbox no problems.
  24. Bluebear
    Think I'm ok for breathing, as I'm using one of the Monster Motorsport relocation kits so that the filter is in front of the rad. All good, just need to start squirelling away some money for more gauges and an RRFPR then! Do gauges come with wideband sensors or would that be a separate item?
  25. Bluebear
    Looking good! Are you running supporting mods to use that ECU? I'm considering going plug&play in the future, just need to get a list together of what's needed. I assume RRFPR and gauges like wideband etc to keep an eye on things?
×
×
  • Create New...