DavidAshton

It will be a twat it you still have air con in as there is very little room with that, the pump and rad. I would take it to an exhaust place if you still have air con etc. Cost me £35 for em to swap it ages ago when i was scared of tools lol.

Been covered a thousand time, normally ends in an argument, know one knows for sure, depepnds on your MOT tester at the end of day.

Any line off the inlet manifold works. Most go for the line the dump valve is on. Blocked off blue line is fine.

Yes that's the exact clutch I bought. Takes 1.2 bar on a ct9 daily. It will take 180 bhp no problem imo.

Anyone who looking at 3 - 4 hours travel and not sure about defo do it. It's more than just a starbo meet, its a full day out with plenty of banter, free beverages and a nice comfy room with sofas and starbos on rollers. Also Steve, can you find out if we can run with bonnets up this time? I didnt like running with it down, if anything goes wrong first place your going to notice is the bay. Plus it makes it a lot more interesting watching the engine at full chat.

http://cgi.ebay.co.uk/STARLET-GLANZA-1-3T-...=item4ceb5bc062 Im using this, sat taking 200 bhp daily with no issues. I think the need for an uprated clutch is highly over exaggerated on here. Ive had a paddle clutch, it failed and was awful to use daily.

I'd skip the hybrid all together. 190 to 200 Bhp can be pulled from a stock turbo, which has a much more driveable power range imo.

There were either 2 evolutions of the jam demo car. 4efte with 190 ps Then later on (guess thet couldn't sell it) it was running the 5e spec.

Very good day last year, defo be attending / rolling again. ATTENDING 1) Steve GT 2) Socks 3) Cheshireglanza 4) Starbuck 5) Ro55ifumi 6) String 7) Amjad starlet786 9) Lukep 10) LukeSR 11) lew777 12)lukerobz 13) Sparky 14) Kennedy 15) Ryan5793 16) Liam_D 17) DavidAshton ROLLERS 1) Steve GT 2) Socks 3) Cheshireglanza 4) Starbuck 5) Ro55ifumi 6)starlet786 7) String Lukep 9) LukeSR 10) lew777 11)lukerobz 12) Sparky 13) Ryan5793 14) DavidAshton

Payment sent.

I want, pm me your paypal for one of these and the other toyota one you did me please.

Mk2 and mk2b fit well. Not sue on the exact year but its the punto with the bigger front lights.

I'd say the airbag story is legit. You can punch a starlet wheel and set the airbag off, seen it done and heard it happen a few times. Don't forget its early 90s tecnology not the complex stuff we have in todays cars. Looking at it though it seems dodgy and any starlet that seems dodgy usually ends up being a shitter seen plenty come and go on these boards. Also I don't think anyone would let you take the sump off a car your buying. I know I certainly wouldn't so don't be supprised if he's not cool with that.

Take it back to Nick and say you want it working. Has he not ripped you off a bit in the past before?

Your eml is on. I wouldnt be booting it with the eml on.

Nice one. Thanks guys.

Hmmm as I thought wasn't expecting too from a 20 quid gauge, looks the part and that's what I wanted. You running water temp too Si? Mines running about 85 degrees which is what I was expecting?

As title, what does your exhaust temperate gauge sit at? Just installed mine, its a cheap apexi copy exhaust probe in the 3rd runner on the manifold. 4efte engine and its sitting at 300 degrees at idle and upto 500 degrees on cruise. Is this normal? For some reason I was expecting it to be at 900 degrees. So what's everyone else getting?

Best GT I ever did see and the only one i would have.....

Do a diagnostic test to find out why the eml came on. Rad is fine, stop being a fanny.

Sounds like its working as it should. Was probably steam not smoke from spray off the road.

You stand between a rock and a hard place. Can tell him to fuck off but if he paypal disputes it you could be left with no gauges and no money.

Dammmmnnnnn that wheel is sweet. I ordered the exact same one off ebay, just got a refund, no explination, no wheel and they disapeared off ebay. Where did you manage to get yours from?

Mega, will transform the car when you get that fitted.

Imo it only looks good with the OEM rear lip or an aftermarket rear bumper. I think it looks out of place with a stock rear Glanza bumper.