maerijn

Looking at images from google it seems the compressor housing is in a different rotation, the actuator sits in a different spot and the exhaust manifold seems to have a different bolt pattern. However some parts can be used: http://www.toyotagtturbo.com/forums/showthread.php?104393-Rotating-CT9-housing @Starlet__SR theres difference in the bearing cartridges aswell, as I could not fit a B compressor wheel housing on an A cartridge and vice versa

They are the CT9A and CT9B and the outer parts such as compressor wheels, housings and turbine are not interchangeable The one that says Toyota CT9 is A (EP82) and the one that says Toyota is B (EP91) See halfway down this page: http://starlet-forum.nl/index.php?topic=22584.150

All 4 plugs black? Could be bad lambda, water sensor or othet things. Is the ecu giving any codes

I've been wanting to make a front bar like that, what material did you use?

Hi Chops, your inbox is full so I will write here, I am interested in your GT rear bumper in 205 black. Can you confirm the condition of the paint, possibly whatsapp or email me some pictures? I've had a bumper shipped from the UK to the Netherlands before, wrapped in cardboard sheets and black plastic wrap. Do you think this is possible for you?

I've had the same problem. Turned out the connector with 2 wires thats on the coilpack had gone bad. Sounds like you could have a bad connector in your loom somewhere too. You can tell if you have the same problem by looking at your revcounter when cranking. During cranking it should go up to ~500 rpm and mine did not do that anymore.

It's all about the piston and conrod assembly's weight mate, they cant be more than 10 grams difference

Buyee and http://fromjapan.co.jp are some good sites

Honestly you can get better deals from Yahoo auctions and using a freight forwarder who will put a lower item value on the customs invoice to avoid paying duty..

Cut and solder the right connector on it

Can you explain how you wired your battery from the back to front

Is your coolant overflow bottle a stock GT bottle? Also is your catch can vented somewhere?

You are correct about the T piece, however you have to block the left pipe, dont vent it to atmosphere

I had the same flexible oil return however I replaced it because it kept leaking oil from it! I think it has to do with not having a bead at the end

Hi mate I see you placed the black isolation material near the firewall and on the floor, can you advise if it helps alot?

Hi guys, could anyone point me in the right direction where I could buy a Denso O2 sensor? The one on tuning developments is a Bosch one and actually gave me worse fuel economy

coils that are closer together should be at the top end.

I know where you bought your engine ^^

Theres probably none as you cant drift a fwd starlet, unless its a modified 4paw

Indeed, very smart to put the sensors there!

Aaaand he put it up for sale even though its still on the boat

Ive had this too, turned out to be a bad connector on the coilpack

I'm also looking for that! What search terms did you use on the auctions?

Horn plate?

Wheels look epic mate!