Asad
-
Content Count
4340 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by Asad
-
Does it to me aswell
-
deffo get the shorud, makes all the difference....theres a reason why all cars come with one...it would be cheaper not to bolt one on more effective cooling
-
i checked the yaris belt clip its flatter and of a different material than the starlet one, thats probably why......still no reply from graham...
-
bump need this stuff gone ^ prices reduced
-
nice and simple way to check ring gaps http://www.c-speedr....dgap/endgap.php checking bearing clearances />http://www.c-speedr.com/howto/bearings/bearings.php
-
get some assembly lube off them too, normal oils too thin...especially at that critical start-up moment
-
You have the gap the pistons all the time ^ standard or forged......every bore is different did you not get the block decked? get them to do it before it comes back mate
-
use a full size if you can, whack two fans on it too....if not put a civic one in alot of people use them with little complaint
-
as above mate, wouldnt waste your time/money on fitting it....wideband is where its at
-
any response mate? tried to fit it again but it keeps coming off...even got a mate to try tempted to send it back and get a refund, £34 lump of metal sitting there..
-
dont think ive ever heard of a discount code for thme, pm iddy im sure he`ll beat any price they have
-
id get that rad and this shround + fan setup much better overall package..... />http://www.ebay.co.uk/itm/HONDA-CIVIC-1988-2000-ALUMINIUM-RADIATOR-FAN-SHROUD-COMPLETE-ELECTRIC-FANS-/220925339812?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3ACivic&hash=item33702d28a4
-
x2 ^ lol
-
Tried all the screws med and large are the ones which fit, tightened it as much as i could without physically breaking the allen key but it either slides off as it gets tighter or stays on and comes off after say 2-3miles
-
Not had a reply yet, starlet n/a you fitted yours yet?
-
most if not all sandwich plates require modification in the way of cutting to fit....the easiest way would be as wallace says and get something like this />http://www.ebay.co.uk/itm/Oil-Temp-Pressure-Sensor-Sender-Gauge-Remote-Adaptor-/370603638177?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5649b2bda1 not sure if its the right size for the glanza tho
-
got some standards and some teins...
-
Bogies and the method in the link is what id do...lol @ the 1000mile break ins no need whatsoever
-
HELP needed best way to reslove worn piston ring issues
Asad replied to craig-glanzaEP91's topic in 4E-FTE Engine Discussions
Thought he was one of the good guys? interesting.... it should have been stripped down, skimmed...valves seated and a full head seal kit put on.. -
HELP needed best way to reslove worn piston ring issues
Asad replied to craig-glanzaEP91's topic in 4E-FTE Engine Discussions
who was the monkey off tgtt? valve seating should have been checked by him, when the head was off... did he replace the valve stem seals? get the head skimmed? just out of curiosity where did you spend the other £250? you need to really find out to what extent he did the job and go from there... -
thanks ^ mailed him see what he makes of it..
-
got it in the post, tried to fit it but it keeps sliding off the belt clip....no matter how much i tighten it, it just slips off the belt clip as im driving along...annoyed tbh anyone else tried there luck?
-
clean them up, say you fitted it but realised it was the wrong one so removed it
-
old stuff, send the new stuff back....say you got the wrong one it was the 200mm fe one you need which you got from else where ;)
-
What's the difference? - Silver/Black Timing belt cover?
Asad replied to Zeldoz's topic in 4E-FTE Engine Discussions
timing belt cover you mean? the silver one is the earlier FTE engine with thicker rods, common myth that they are stronger...it has been proved they are both of the same strength