Jump to content

JayJ

Member
  • Content Count

    1012
  • Joined

  • Last visited

Everything posted by JayJ

  1. Stop the video at 2:52 and you will see the car has already started to turn, 2 secs ahead and the biker hits the front of the car, also note the distance the bike goes during these two seconds. If you could see a video of this from the car, who would you blame?
  2. JayJ

    New battrey

    http://www.demon-tweeks.co.uk/motorsport/batteries/odyssey-extreme-racing-25-battery-pc680
  3. JayJ

    New battrey

    Odyssey 680, haven't had a single problem with it even on winter -30c degrees. Capacity is quite small and your audio system can drain the battery empty in a couple of hours, if the car's not running.
  4. Check Bryan-4E-FTE and Stefan_S build threads
  5. It's a very common problem and there's not really a much to do than buying a new(used) one. TGTT forum has a fixing guide that will help or not. Didn't help for me, as the mirror model is different and there's no play on the cover. I took the mirror in the parts three times, but couldn't get it work.
  6. Jumper 21 is the same as 18, but setting is vice versa, open = add only, 1-2 = IN/OUT. I left it 1-2.
  7. There are two emanage ultimate threads below this thread and both of those have the link for wiring info.
  8. There are so many bolt on turbo kits for it already, so buy one and make it fast ;-]
  9. Not sure if you can buy them from somewhere, but here's DIY
  10. Always better to tune with det cans, but knock logging seems to work as it should. With 7.6khz you really need to look for peaks of 70% or above for actual knock. Smaller peaks are propably just ghost knocks or other noises.
  11. Yeah, need to insulate it properly now
  12. That also explains why it's not connected as my battery is relocated in the boot and the starter wire is running from there. Thanks Colin :-]
  13. Found this ring connector today tucked between the wirings, where should it be connected and why it's not connected?
  14. Tutorial of OBD reader installation?
  15. If it's wired as it should and you have activated it from the parameters, then open the data logger, choose knock signal for things to log and go for a drive. If it detects knock, you will see the graph make a spike.
  16. umh, what you mean?
  17. Any UK shop sell those filters? Couldn't find any local shops from here, but Nengun seems to have them for 39euros + shipping + tax :G How often do you change the filter? I have been changing with every oil change(5000km), as I got plastic bag full of cheap Solid Ace filters 4 years ago when I bought the car. Just used the last one
  18. Well, if some is interested, here's the log of cold start and warming up values. As you can see, ECU has three states when starting up: after start enrichment, warm up enrichment and open loop. ECU turns after start enrichment off when water temp reaches 36c and warm up enrichment off at 68c. Frame # INJ IGN IAC RPM Map sensor ECT SPD OX1 Boolean States 127 0MS 5.10ATDC 0% 0 92.02kpa 14.40C 0KMH 2.50V After start Enrichment ON|Warm up Enrichment ON|Open Loop mode|28 7.88MS -10BTDC 96.08% 1375 40.68kpa 14.40C 0KMH 2.50V After start Enrichment ON|Warm up Enrichment ON|Ope
  19. Toffinator has one for sale, 600£ without commander
  20. Some ester based synthetic 5w-30, 5w-40 or 10w-40 oil like Fuchs Titan Race, Motul 300v or Redline High Performance. Ester oils have thicker oil film at operating temp than normal oils and will tolerate more heat.
  21. Check the Electronics part of the forum, there's one I made..
  22. www.google.com "starlet sportif 15" standard height" images Yikes!!
  23. Someone already lost the game http://www.theguardian.com/uk-news/2014/aug/25/teenager-death-ice-bucket-challenge-cameron-lancaster
  24. I run E version without adaptor, no problems so far. DIY emanage ultimate harness
×
×
  • Create New...