Jump to content

JayJ

Member
 View Profile  See their activity

  • Content Count

    1012

  • Joined

  • Last visited

 Content Type 

Everything posted by JayJ

  1. JayJ
    Yeah na lights on the front due the rhd traffic. I have got jdm lights and have some plans to make them fully legal, but it will take some time.
  2. JayJ
    Thanks, quickly washed it weekend, but still quite dirty. :G Finally got Reflets as I have wanted them so long, makes the back much more modern looking. It should come off with Toyota badge and now that you have mentioned about it maybe I should do it right away tomorrow. Also just remembered that I've started peeling off the ABS sticker a long time ago, but for some reason it was interrupted and remainders are still there. I should finish it too, tomorrow. Hope to see 230 ;-]
  3. JayJ
    Another update ;-]
  4. JayJ
    There you go, but in 16": http://www.ukstarletowners.com/topic/58534-my-livesports-glanza-ep91-update-24062014/
  5. JayJ
    This might be helpful, if you only can spot it right: http://www.3swiki.org/Tuning:_Troubleshoot_AEM_Wideband_Gauge-Sensor_Combo
  6. JayJ
    PM'd you, but just saw you have deleted the conversation. Would have been nice to at least get an answer that you are not interested to ship outside UK
  7. JayJ
    I have been very happy with these! Good and clear sound
  8. JayJ
    such shiny, wow setup, much fuel Can't wait to see this finished :]
  9. JayJ
    Progress with the OBD and it's working now! I made quite a lot of testing on friday and everytime the outcome was that the values froze when the car passed the speed of 3km/h. If the engine wasn't running, but odb was connected, it was showing the speed signal normally thou. I spoke with Jean who developed the unit and he suggested to disconnect the speedo cable and test it again to be sure it's not bad connection on diag connector or any noise/interference.This time values updated normally, but missing speedo signal triggered check engine light and I had to pull off and connect the speedo cab
  10. JayJ
    Yes, you will need red bulbs for the top and bottom and orange for the middle
  11. JayJ
    Tested already, you can rev the car as long as it's stand still and values will log, but it will freeze as soon as the car moves, no matter what values you are logging. It looks like ecu cutting the data feed totally. Thanks! Waiting for 5e colin to test her unit too :-)
  12. JayJ
    Ecu uses a lot of sensors to calculate the best possible afr and map sensor is one of those. It isn't there just for boost leds and fuel cut. Surely you can unplug it or use a diode to clamp the voltage and your engine will still run(probably in open loop), but it will also have effect to fuel economy, emissions and power.
  13. JayJ
    Just came from Toyota and bought Yaris type d jets with +2degrees angle. They fit perfectly without any modification and spray/mist seems to hit just below the middle Only downside is the price, 23eur each!
  14. JayJ
    Put in a completely new wire without any extra connectors :-)
  15. JayJ
    Did you replace it with OEM Toyota sensor?
  16. JayJ
    Freezes with my tab too, I'm starting to run out of ideas what could cause the problem
  17. JayJ
    How about Toyota Yaris jets? They are fan type and should fit with a small modification? 85381-52250 (Type A) standard angle 85381-52280 (Type + 1 degree 85381-52290 (Type C) - 1 degree 85381-52300 (Type D) + 2 degrees 85381-52310 (Type E) - 2 degrees Not sure which angle would be the best with Starlets, I guess it's just trial and error. Left one from MR2, right one from Yaris
  18. JayJ
    I have been planning that too. It would be easier to use google maps for navigation and play music from spotify via BT with tab than phone. :-) Not really, I found out that the values freeze as soon as the car moves 3km/h or faster. The problem could be corroded diag connector pins, electrical interference, my phone playing up or maybe ecu related thing. I have cleaned the connector pins twice now, so I don't believe it's the corrosion. Next step is to test it with my tab tomorrow and see how it goes.
  19. JayJ
    Yes, it is
  20. JayJ
    J's Glanza Orange = B+ Red = Vf Green = E1 Green = TE2
  21. JayJ
    Look at my build thread there's a pic how to connect it I have a small problem with this unit, as it won't update values when car is moving. Still haven't figured it out. Let me know if yours work as it should!
  22. JayJ
    It was running 5e with hi-flow ct9, made 250hp. The previous spec was 4e with hi-flow ct9, 190hp. edit: is->was
  23. JayJ
    It really is that difficult when they have been in use two years and all the threads are full of shit ;-D
  24. JayJ
    Still not mapped, but will be until the summer has gone! Last week I changed my TRD plug leads to red Ultra leads I bought as used and they started missfiring on boost. Took them off once again and gave a good clean up and now they are spot on! Then I needed a harness for my AEM UEGO wideband as I want to use it for data logging with EMU. Greddy sells the harness, but the price is quite high, so I bought Futaba servo extension cable that is used in R/C cars. You have to cut a small edge off from the plug and it will fit perfect. (already cut on the pic below) Another nice gadg
  25. JayJ
    emb? emu?
×
×
  • Create New...