5e colin

LETS PLAY BINGO

no behind the throttle body just to the left it has a 3 wire plug to it the little pipe plums strait in the back of the intake manifold is thats ok i would start looking in wax valve and idler controle valve

check if your map sensor pipe isnt disconnected it causes hunting

fuck that just put an nast image in my head i need to go and get pissed now !!!

this requires turbo exhaust

id fit a 4efte system and custom connect your 4efe manifold to it great upgrade

daniel thats a good idea """ scammer suspect """" above the avatar socks thats easy to set up in your admin panel :) open a new group with no privileges you can probly also make them words appear in bright red or so ????

its the lambda 2 or cat temperatur its non ecu so not important for running o2sensor ( lambda 1 ) on the other hand is ecu controled

ya i think thats why i went td/tf ha ha

easier to undo the 6 bolts on the head to take manifold of then undo the 3 on the bottom of the cat where it meats the exhaust then 2 thet secure the cat to the cat bracket then the 19mm bango bolt on the oil filter housing so you can take out the complete unit o dont forget the open the oil return rubber pipe there is 1 bolt on the turbo to mani thats a real CUNT to open when in situ its much easier when its on the bench / floor

nice to se a update how did the spoiler turn out ???

i tried on toyotaownersclub.irl but his username must be a tat diferent because i cant find him on there

yes can al be replaced in a box cant recommend anyone over there mate im in ireland maybe you have a good mechanic as friend who will do it for you ??? its not a big job for some1 in the know how 2.5 to 3 hours work to replace al the bearings

from 280mm to 260 and 1.5mm from the inside face of the pdc after this is done its a direct bolt on with no spacers or longer studs

niiiice color dude nice car

the whine comes most from the input shaft bearing closest to the clutch if the dif is moving around alot then bearings /spacers are gone to time to rebuild the box before it seizes / self destructs

socks ban hammer mate its not the first issue on that username ban the ip address to

as above the bzr levin twins with opel 280mm disks cut down requires no spacers and stops very well thats apec dsk2188 by the way

im in the republic mate

soooo im not the only 1 that experianced this with the oem lsd ha ha

around 40/50mm al paint is intact last time i checked

have some there brand unknown 40£ ?

thats 1 sweeeeeet silver bullet mate niiice

soooooo mmmmhhhhhh i updated my thread on toyotaownersclub.irl and got hammered because i welded on the bushes and dipped them in water for a few secs to kill the rubber burn they told me there not roads safe and are going to fail and locking my thread for the rubbish i put up etc etc ( tho there still perfect after 2,5 months of pot hole back roads ) if they where going to fail they would of done the first week of abuse so just for safty to anyone reading dont weld them on or do at own risk and check them often will have to come up with a nylon insert option or poly push in the next few months

i hope price goes back up like in the old day so those pesky young boy racers cant afford them anymore wheres the days of 10k+ for stock ish gt / v