abbott Posted December 26, 2012 Author Share Posted December 26, 2012 UPDATEnot much of an update but still playing and ordering bits.On stripping the box to reseal and make sure all is ok i find that there was no magnet in the box. so ordered a new one from toyota and installed and sealed box all back up.Ordered a couple of fitting from torques for the fuel line, rail, fuel pressure regulator and oil breathers for the cam cover. still have got alot more bits to order from them once christmas holidays been.Ordered a water pump pipe to thermostat hose and dump valve hose from Roose MotorsportPicked up my gearbox mount brackets from the powdercoaterschristmas presant from my brothers my roose collant hoses Quote Link to post Share on other sites
shorty Posted December 26, 2012 Share Posted December 26, 2012 Looking sweet dude. cant wait to see it coming together! Glad your still building it up. Quote Link to post Share on other sites
abbott Posted December 27, 2012 Author Share Posted December 27, 2012 Looking sweet dude. cant wait to see it coming together! Glad your still building it up.thanks chap. im etching to get it back together already. only got 9weeks till the babys due now, so need to get as much done as possiable to wrote up a list last night so got to work through that before engined back Quote Link to post Share on other sites
Glanza AuA Posted December 27, 2012 Share Posted December 27, 2012 Woow outstanding detail,looks awesome Quote Link to post Share on other sites
Spoon_tuned Posted December 28, 2012 Share Posted December 28, 2012 good work on the gearbox mate. Quote Link to post Share on other sites
GAZ@A&G_TUNING Posted January 11, 2013 Share Posted January 11, 2013 come on ab's get a update Quote Link to post Share on other sites
hughes21 Posted January 11, 2013 Share Posted January 11, 2013 He said its too cold in his garage haha Quote Link to post Share on other sites
abbott Posted January 11, 2013 Author Share Posted January 11, 2013 I will try and get some updates up tomorrow if i get time Quote Link to post Share on other sites
akyakapotter Posted January 11, 2013 Share Posted January 11, 2013 He said its too cold in his garage haha He needs to man up I will try and get some updates up tomorrow if i get time awesome looking forward to it attention to detail is unreal so clean Quote Link to post Share on other sites
abbott Posted January 11, 2013 Author Share Posted January 11, 2013 Ive been working in the garage all this week cleaning the bay and makinh it mint ;) updates tomorrow dude Quote Link to post Share on other sites
pick1 Posted January 11, 2013 Share Posted January 11, 2013 Goody goody Quote Link to post Share on other sites
Liam_D Posted January 11, 2013 Share Posted January 11, 2013 Looking forward to seeing these updates! Quote Link to post Share on other sites
abbott Posted January 14, 2013 Author Share Posted January 14, 2013 Little update Well after sealing the gearbox up i gave it a clean up and a few fresh coats of paint which came out really well. added the powdercoated mounts and zinc bolts. Added the powder coated mounts, zinc bolts, covers and a new set of drive shaft seals Clean and painted drivshafts Cleaned and painted power steering pump and fitted lighweight pully and zinced bits Picked up some engine bay bolts, fixings and brackets up from zinc coaters desided to de clean up the engine bay as it was grubby and wanted it looking fresh when the engines all back in. baged up all the plugs and loom ready to be de greased and pressure washed. after doing this it was still dirty so desided to use some elbow grease and use some dirty remover and polish as you can see dirty bottom to cleaned top A bit more progress and it started looking better Fitted new fuel filter cleaned a put back the carbon canister and all brackets and zinc bolts. still got alot more polishing to go. On the throttle body i have had the a/c vacum welded up A few deliverys turned up of various things 52mm gauge pod for my boost gauge OIl pressure sensor adaptor from speedflo Oil pressure switch from Camskil Murrey Clamps from SFS Hoses pic of them fitted to pipes Quote Link to post Share on other sites
pick1 Posted January 14, 2013 Share Posted January 14, 2013 The attention to the details in that update is nuts and the gearbox looks good enough to eat lol fancy making mine look like that ? LolKeep up the good work mate looking forward to the next update Quote Link to post Share on other sites
Amjad Posted January 14, 2013 Share Posted January 14, 2013 Love the attention to detail, this is gonna be one of the best Glanzas on the forum Quote Link to post Share on other sites
lugzy clart Posted January 14, 2013 Share Posted January 14, 2013 the zinc coated bolts looks so goodgunna be hard work to keep it all so clean when shes back on the road Quote Link to post Share on other sites
Jamie_VF22 Posted January 15, 2013 Share Posted January 15, 2013 Lovely work as always abbott keep it up mate Quote Link to post Share on other sites
SiCaln Posted January 15, 2013 Share Posted January 15, 2013 gonna be awesome when done man, u'll have to take me out in it Quote Link to post Share on other sites
ro55ifumi Posted January 15, 2013 Share Posted January 15, 2013 So fresh she gonna be ready for Japfest? John Quote Link to post Share on other sites
Lines Posted January 15, 2013 Share Posted January 15, 2013 (edited) The zinc coating is a nice touch, what does it cost? Edited January 15, 2013 by Lines Quote Link to post Share on other sites
jordan jt Posted January 15, 2013 Share Posted January 15, 2013 perfection!! Quote Link to post Share on other sites
abbott Posted January 15, 2013 Author Share Posted January 15, 2013 The attention to the details in that update is nuts and the gearbox looks good enough to eat lol fancy making mine look like that ? LolKeep up the good work mate looking forward to the next update Thanks matey. if you want me to do it more than happy ;) Love the attention to detail, this is gonna be one of the best Glanzas on the forum thanks mate nice to hear its worth while the zinc coated bolts looks so goodgunna be hard work to keep it all so clean when shes back on the road thanks chap. OCD is my middle name so shouldnt be too hard Lovely work as always abbott keep it up mate thanks Jamie we will have to meet up soon gonna be awesome when done man, u'll have to take me out in it Si any time mate you know that So fresh she gonna be ready for Japfest? John thanks John Im doing my best to get it all done and mapped ready for japfest but only got 6 weeks left till babys hear so up against at the mo The zinc coating is a nice touch, what does it cost?thanks dude drop me a pm ;) Quote Link to post Share on other sites
Jamie_VF22 Posted January 15, 2013 Share Posted January 15, 2013 Defo mate my engine is the next one to be built at TD and the cams are here next week so wont be to long now buddy Quote Link to post Share on other sites
abbott Posted January 15, 2013 Author Share Posted January 15, 2013 Defo mate my engine is the next one to be built at TD and the cams are here next week so wont be to long now buddyGood news mate will have to go for some drives when done Quote Link to post Share on other sites
Jamie_VF22 Posted January 15, 2013 Share Posted January 15, 2013 I no pal ,defo mate will let you no buddy when is yours going to be done Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.