Jump to content

Ollieh17

Member
 View Profile  See their activity

  • Content Count

    5109

  • Joined

  • Last visited

 Content Type 

Everything posted by Ollieh17

  1. Ollieh17
    The proper thing to do would be replace the whole lot. Anything else is a bit of a bodge
  2. Ollieh17

    Oil cooler

    Ollieh17 replied to mork's topic in Engines

    Id never use a 30 on a 4efte
  3. Ollieh17
    cheers mate. Guessing you werent there in the GT?
  4. Ollieh17
    Almost a year on, made retrorides this year and made it up the hill.
  5. Ollieh17
    Assuming a bit of lift off oversteer. Coilovers and cage probably made it worse!
  6. Ollieh17
    lambda and cat temp i think
  7. Ollieh17
    I guess they are at the age where the automatic is worse on fuel than the manuals. I average about 25mpg over 8 mile round trip, start stop traffic. With a remap it will be about 280 so close to your average spec b i assume?
  8. Ollieh17
    I fancy one of these to replace my Audi A4 avant, really not doing the miles to warrant a 3.0tdi.What they like on fuel?
  9. Ollieh17
    Is it interference? It's easy enough just make sure the marks line up. If you can change a belt on a non-inteference you can do it on a interference
  10. Ollieh17
    Personally, don't see the point stripping a car out then putting a sub in it. Not the type of car for all that rubbish
  11. Ollieh17
    5/40 or 10/40 would be no different. You could try a 50. The thing is there is something causing the low oil pressure. And spacing the valve is just masking the issue as is thicker oil really. Oil pressure is greatly affected by the clearance on bearings, cams etc
  12. Ollieh17
    Not the bearings...havent even looked at them. Wether they are the cause or not, Any period of low oil pressure has the chance to damage the bearings
  13. Ollieh17
    if the engine is out of the car it is worth changing all the seals and gaskets
  14. Ollieh17
    Sure you can get 4 bolt to hand adapters. Tial or turbosmart, nothing in it.beware of fakes for either of them
  15. Ollieh17
    I used a 4efe one on mine, fits just the holes for the mounts dont completely line up
  16. Ollieh17
    Yellowspeed are worth considering too
  17. Ollieh17
    Just use a good degreaser, brush it and wash off with lower power hose
  18. Ollieh17
    If it's forged it will probably have are bolts so will be a different Torque
  19. Ollieh17
    plugs on fuel canister etc dont need to be plugged in. Lots of cars run without all that
  20. Ollieh17
    japan racing do something similar i think
  21. Ollieh17
    you can get them £67 each fitted mate. May have to drop collected price a bit to be competitive. just my 2 cents. Good tyres though glws
  22. Ollieh17
    Yup still possible
  23. Ollieh17

    Oil Leak

    Ollieh17 replied to Nilz90's topic in Engines

    Engine won't need to come out on one of these
  24. Ollieh17
    I'd be dropping the main and rod caps and checking the bearings
  25. Ollieh17
    that would make a awesome sleeper
×
×
  • Create New...