morgey

Im pretty sure carbon goodies uses the same carbon cultures to supply them. Or atleast he gets parts from them as i remember seeing some packaging in one of his posts

If ya want to get all technical theres a equation you can do. Roughly 0.000008702 x drag coeffient x frontal area x desired speed (cubed) Seems an ep91s drag is 0.33 frontal area is hard to judge but they do it for a 288 gto ferrari at 20.5 so you can assume ours is bigger and disired speed of say 170mph So with a frontal area of say 25sqr ft?? Might be a bit big? Lol 0.000008702 x .33 x 25 x 170 (cubed) = 352 You would need 352whp do to 170mph But for every .5 extra square footage frontal area you need 12whp to do the same speed or the opposite if it were smaller Change the desired

^^^ yeah thats the biggest factors. I think i read somewhere it takes about 270hp (not sure on what torque) to hit 170mph but thats the limit of our boxes with the stock 7800 limiter and you have to hope both power and torque are still climbing at that point. Edit: thats in general for any car not specific to starlets by the way

I've seen 127mph on satnav speedo was past the end of my clock. Prob around the 135-140 on the speedo area. Car was still going but ran out of track. Thats with 175hp but reckon it would struggle to get much more than 135 satnav speed, which would put it at 145-150 speedo Oh and bear in mind mines n/a so dont have the torque of the turbo boys ;)

I've used it, struggled on the silver that my speedlines came in but aftermarket paint comes straight off.

Could be, might be worth checking the fuses with a multimeter first though. Is easier haha

Revs are picked up from the distributor and sent to the ecu, might also be sent to the dash at the same time on a second wire. Heaters, the fan not blowing or are they not warm? Plug on top of gearbox is reversing light sensor

Someone had a V with this in the other day, first id seen of it.

If you want it feeling really good, get the alignment done, your front top mounts are both different still. Would be even better

Wedsports could do it. Tbh its engine and loom, dials, stalks from a glanza Then a little bit of wiring for fuel pump n rear electrics. And you will loose the adjustable headlights as well unless you want to rewire your indicator stalks instead of using glanza ones

Couldnt they set the right one out further and re center the steering or die the left one so it has thread further up and cut the end off allowing it to go in further?

Hahaha nice try, ill send you it with a wodge of cash my way ;) Tbh i might be refitting my Levin lsd as its much easier to deal with day to day than my cusco one.

I know i spoke to you but forgot to ask if he/you were on here. from sudbury area with a td04 conversion.

I think so, if someone has an inner cv cup they fancy sending me ill happily try it in my diff.

Ae111 forums and pages, irish toyota owners club might be an idea since theres a few over there as well.

Ok well you've got topcoat body repairs, run by steve in norwich. Try this link, if not facebook topcoat body repairs https://m.facebook.com/groups/193110097412073?ref=bookmark&__user=611295153 Triple C autos in watton run by alan Triple C Autos Ltd Unit 18, Norwich Road Industrial Estate, Watton Thetford, Norfolk IP25 6DR 01953 889884 And ill add to this as i find the names of other places mates have had work done. But I've seen the work these places do and its good.

I saw this years ago never noticed it then haha Is a really bad film as well lol

You can get small flat subs designed to go under the front seats dude.

I could suggest some around norwich if thats any good?

Didnt see that! Very sneaky haha

That pipe should have a bracket on it bolted to the block stopping it from being able to come out like it has. Either the bolts come out or it was never fitted

Almera looks mean! Anything special under the bonnet?

Welcome, look clean mate, should get some rims for it

Get the black steering column surround as well. But get the right one as some dont fit lol

Haha fair enough, just looks tiny