morgey

Parts can wait, making sure people are safe and well clearly takes priority. Hopefully it doesn't get too much worse and things can get back to normal. Fingers crossed for all you guys!

Figured you would but was just checking 👍 As for the TPS, im sure when one of the other lads did his with tt600 throttles, he just needed to file off the lug on the tps connector and it plugged straight in.

Are you planning on tapering the runners of the old inlet manifold so theres not a big restriction for the air to hit?

Haha ill hold you to that 😜

Then get... Ecu Exhaust manifold Downpipe Injectors Intake plenum Front mount All pipe work Boost controller Forged pistons and conrods Arp head bolts heavy duty clutch Various gauges and extra sensors Tune. And anything else i forgot lol But any freebies will be greatly received 😉

With that site you have to add VAT/import tax (20%) on top of the shipped price, then you will probably have a £12-15 handling fee this end. Id check with toyota for a price 1st, sometimes their prices arent as bad as you'd expect

Direct from toyota or amayama.com you should be able to

Hes just carrying a lot of speed for the best part. He gets held up behind that dc5 near the end and when theyre both flat out on it hes only just pulling past it. Unless the dc5 was supercharged but it sounds n/a on the video?

Ahh that would have been handy, i should have probably jacked the car up more but never mind its done now!

Can you add shipping info and payment methods please

Exhaust is now back on. What a mission V bands are under the car. Took bloody ages 😂

Most people run triple core civic rads on there builds without a problem cooling wise

Haha when its been good for a while and i get bored of it 😜

Cheers, i thought it needed something and i had some ally laying around at work so stopped in after hours and knocked them up. I've mounted the middle one ontop of the engine mount since there was an M-8 hole in it but im a bit concerned about the movement from the engine causing it to wear through. But for now im going to leave it, ill keep and eye on it and i can always knock up a bracket to mount to the body work if i think its causing any damage.

This took no time and all and just scrubbed the outside with the rough side of a kitchen sponge

Hot soapy water and some small stones/shingle. Throw it inside and give it a good shake, Mine came up almost like new

I hope so, first time if had any work done so its all new to me! Just hope my instinct is right haha. Tbh i didnt even go anywhere else. These guys were happy to come down check the car over, give what i felt was an honest opinion and then quoted me after they had some time to assess it themselves. The other places near by have been open longer which is probably why theres more horror stories about but I've spoken to a few of them previously on various occasions and they just came accross wrong. One guy hates anything thats not a high end german car and detests jap motors so thats an instant no go and another did some work for my brother and they were more than happy to rush things which id rather they didnt do.

Took this on a road trip up scotland on bank holiday weekend, 1200mile round trip, didnt miss a beat. Fantastic roads and scenery up there well worth the drive. Also got my new wheels fitted and got a pair of NS2R's fitted as my uniroyals were on the limit after 8k or so. Angel of the north way up. Humber bridge on the way home. Forth rail bridge queensferry Theres plenty more pics but im down the pub so cba haha

Early august 😑 There is a fair Few paint shops around here but either the owners are bell pieces or the work is very varied, hence being booked into one with a massive wait!

How have i missed this entire thread? And that last pic is quite some change engine wise haha

Rears are nipped up but fronts, stock ones im not sure but i know its a fairly decent amount, I've done some work to my hubs and now have some passat bearings and they go to 152lb-ft.

Long time no see! Welcome back

#fatmanproblems 😂😂 I sprayed my bumper brackets up yesterday had a couple of stainless bolts so mounted them with that but could do with some more for the crash bar. If i can find a torque wrench ill do the hub nuts today, stick the rear bumper on and i think my bros mate is towing his swift gti home so will have my axle stands back to do my exhaust 😊

My phone decided it didnt want spell check any more so all my fat finger mistakes are coming through 😂😂

Its about time, its been over a year 😂 Haha take it as a compliment 😉 I think ill have to get and bay dress up kit too, some of them rusty bolts loom terrible!