morgey

This is going round in circles lol. Can someone put it in plain english what money was exchanged and what for exactly? From what i can see there was £52 deposit and £68 remaining paid so £120 for a pair of quads? I under stand They were "not as described" So were then returned now with a broken lense? And £68 refunded. Leaving christy with no lights and £52 worse off? Christy offered his spare light to cover the broken lense if he got his £52 back right? But bens claiming he hasnt got the £52 and neither is christy. So wheres the missing £52 :/ hmm

Honestly dont bother with the dash speakers if theyre in the same place as the ep91 speakers, They still suck even when upgraded. What you could do is box them in to help push the sound out and create some bass.

Dont waste your money lol Tbf the only thing you could do which would help is get some optional ep82 door speakers, the oem dash speakers suck due to position.

They also have a viscous coupling that saps like 70% of the power going to the rear. But that would also prolong the life of the rear diff and axles

25mm all round from factory. They were TTE springs and most of the TTE springs were made by eibach.

Get some spigot rings and it'll be grand

Alpha horns. Theyre oem extras in japan I think That other horns stock but cant remember if its for the horn or something else

Thats smart that.

Turbo discs are the same unless its a very early mk1 N/a's have smaller discs. Pads i think are the same as i thinknits only the carriers that differe between them

Probably because theyre not designed for a starlets suspension design. Im assuming you mean mk2 polo/golf?

If your mounts were fucked maybe they were allowing that much movement the shaft could rub. Cover that patch up with some paint and check on it after a few hundred miles

I managed to cabletie mine in place so it still worked as it should albeit slightly off center for cancelling. You can always put your horn on a switch on the dash, thats what the cowboy before me had done to my car. Lol

Haha do well. Get the 4k porn out 😂😂

Basically Gt recaros. Glanzas have the text on a black strip. Will fit fine in an ep.

I get 10mb at home and 22mb on my mobile 😂 Is this business BB or something? Fastest we can get round our way is like 35-45mb

Yeah c52 is Gt

Looks as if the panard is there, but its hard to say as its on the other side of the axle. Only thing i can think of is knackered bushes but cant remember if youve done them or not?

Theres a mint green one around my way too haha

Theres not much gain per cost for ITB's it does sound amazing and setup correctly theyll be fine to poodle about with. Just make sure you get a good map signal and put a pulse suppressor in the feed and it should be grand.

Put a stock pressure reg on it 1st. Check the timing. Turn the crank so the bottom pulley is at 0 on the cover and whip the top cover off and make sure the top one is lined up with its marker, if that checks out take the cam cover off and check the inlet cam is lined up correctly. The 2 gears have marks on them that should be pointing at each other.

Sorry just in one of them moods haha, if you were building a spare box to sell then it might have been of use lol could have sold it to the corolla world

I've got one but its for a 4A-GE engine not a 4E lol Basically it wont fit

White smoke is probably condensation if its not been run in a while. Black is fuel, could be a few things cause that. have you checked for any engine codes By bridging te1 and e1 in the diag port? (Someone correct me if i got the wrong pins) sometimes they have codes but dont throw the c.e.l on It will cause the engine light to flash in a sequence, if its a constant flash its clear but if its spaced out its throwing a code

For a 4A i do lol

All you need is 2x side lights 2x brake lights, indicators/hazards and fog light.