pockrockgtti

The pins are held in by a little tab. If you look at the plug from the front get a needle or a stiff peice of thin wire and just push it in just above the pin, still holding it in place push the pin out with needle and it just pop out the back.

You can take the pin out of the plug and solder a new wire on to it.

Im just in the process of buying a house, or as i like to tell people, a garage with a house. If all goes well ill soon have a garage thats about 20ftx30ft and also has a 10ftx20 workshop upstairs. Its honna take me a while to kit it out, i should even have room to get a 2 post lift seeing as the celling is high enough. Lol

Its not gonna be a bolt in a starlet.

The k3vet has nothing in common with the 4efte, apart from the fact it a 1.3 and turbocharged. I mean the bore and stroke of the engine isnt anywhere near the same. Its got a chain aswell not a belt. So i doubt very much the head off that will fit a 4efte. The kv3vet is more or less the 1.3 2szfe which is found in first gen yaris with a turbo slaped on it. So it should be a straight forward bolt in into a yaris.

As above. Please contact via pm.

As above. Please contact via pm.