Jump to content

A L 3 X

Member
 View Profile  See their activity

  • Content Count

    1886

  • Joined

  • Last visited

 Content Type 

Everything posted by A L 3 X

  1. A L 3 X
    I was gonna say mine isn't fitted yet but does feel a lot stronger, however the reason it isn't fitted is one of the bolt heads rounded before I managed to tighten the wheel on the boss lol, so need to get some new bolts
  2. A L 3 X
    Lol heard about this before, hopefully the ones from the group buy may be stronger
  3. A L 3 X
    You can scroll down to the bottom and click view full version then delete them on the full site? A pain but that's how I do it lol.
  4. A L 3 X
    As above, my bonnet says 10w-30, I use 10w-40 semi now
  5. A L 3 X
    Water pump, or early stages of head gasket spring to mind mate.
  6. A L 3 X
    No probs mate
  7. A L 3 X
    Fucking hell :/ That's actually closeish to me if I finish work on time I may head up there, any other people from Uksc gonna go?
  8. A L 3 X
    Enlarging my wastegate didn't have any effect by the way, a Bigger penny would be needed, I did however have big ass fmic, massive hks filter, decat, and 2.5" fujitsubo system lol, set at 0.4 on full throttle would cut easy, every car/setup is different but I deffo recommend going external wastegate
  9. A L 3 X
    Fuel cut is more like at 0.85 bar You could do that, but trying to avoid hitting full throttle is sometimes difficult, a tap of throttle and it will shoot up quicker than you think, When I'd done those mods but was running an internal wastegate I turned my actuator down to like 0.3 so when it did creep it only crept to like 0.8 but sometimes then it even rose and cut. With that method you don't get the quick spool above 0.3 bar but you've got less chance of cutting. I'm running an external setup now and it's miles better
  10. A L 3 X
    You see those hangers on the backbox? They aim to the front of the car, on a Glanza the hangers aim out to the left, with the fujitsubo a bracket was used to bolt to the hangers and had its own hangers on aiming to the back of the car so with two exhaust rubbers it would join with the backbox, so either you will need this bracket or to take it To an exhaust place and have the exhaust modified. I've taken some measurements of how it should fit and dean has offered to Make a bracket for roughly £20
  11. A L 3 X
    Ah nvm, I'll give up haha, gimme a Shout if u want one Of these brackets I'm Gonna get made Up?
  12. A L 3 X
    Ah really, might have been a rep or conversion then but had the body bits, I was like wtf when I saw it over there haha
  13. A L 3 X
    I use loctite stuff mate, I used the black one and it's been fine but this copper stuff may be better for the hight temps: />http://www.halfords.com/webapp/wcs/stores/servlet/ProductMobileDisplay?catalogId=10151&storeId=10001&productId=173139&categoryId=255217&langId=-1
  14. A L 3 X
    Never say never ;) Nah in all fairness I didn't see your reply when I posted I'd happily keep mine if I ever take off the wepr kit
  15. A L 3 X
    Not an Asian lad from Leeds is he by any chance?
  16. A L 3 X
    You buy that aky or is it still for sale?
  17. A L 3 X
    Got a Zisco decat, mild steel, should never crack according to Keith, he also welded in a second lambda hole for wideband, although a bung is included for if you don't have one. 3 months old if that, £80 plus postage
  18. A L 3 X
    Ah yeah it does, the silencer box has a dint in the same place as mine lol Not sure how much they are new but I have socks old one and paid £300 for it which wasnt too bad a price I haven't seen mine spit flames but hopefully it will once I've got an Ecu on at 1 bar, with yours at td04 though it should be louder ;) Can u get in touch with the guy for the bracket lol?
  19. A L 3 X
    Pic won't work mate u got a direct link? But yeah it seems you have mate, arguably one of the best sounding exhausts for a Glanza ;) Just a shame you aint got the bracket, mines had an extra hanger welded on to fit without, but is a bit wobbly so I'm gonna get dean to make me a bracket up if you want one making too?
  20. A L 3 X
    Does it say 001 on the jasma marking? And does it have a spring bolt flange instead of a flexi? If so its a fujitsubo power getter like mine, decent Jdm exhaust not a rep, and they sound mint And bollocks, I would pay you to lend me it so I can make a copy lol
  21. A L 3 X
    That looks to me like a fujitsubo power getter exhaust, do you by any chance have the bracket that it fits to?
  22. A L 3 X
    I'll just be running it at 1 bar or maybe 1.1 on ct9 or ct9 hybrid Did it run ok on yours mate?
  23. A L 3 X
    I've got a matching double din flip out head unit and amp same as these if someone wanted to buy both And make A set ;)
  24. A L 3 X
    I saw a LHD quad light gt in that colour in zante, reckon it was a rep or do they do them in LHD?
  25. A L 3 X
    You ever had the fuelling checked with it on?
×
×
  • Create New...