lukEp

The 4E doesn't even have rocker arms they have bucket and shims. Unless you mean connecting Rods? If you do mean connecting Rods you need to get your terminology right I hear you though. Some people do give out some shite info even when there not sure them self.

Looking good. Yeah the fogs are a factory option and are like Hens teeth. Glad it staying Stock.

I'll have a look when I'm home pal

Electric mirrors weight loads compared to the manual ones.

I gave Ed 4 10mm spacers few months back. Ask him if he still has them to see if it solves the problem.

Doesn't look like it as it don't have spacers and longer bolts.

Check you haven't put the water and vac lines the wrong way on the throttle body

Late 2011 or early 2012.

No worries jason. Was a pleasure.

My old glanza bottom right corner. P304RNE

Na shocks are weedy thin compared to glanza shocks. I change my fronts from uk NA to import glanza and they glanza ones were alot beefier.

Which crank seal? Timing belt side or clutch?

Nope. Just a full engine bay loom and fuse box.

I've a 96spec one. 98spec are different.

I've got 96 spec pal.

98 or 96spec pal?

Not when your like a jaffa ;)

Sorry I'm pulling out. Won't make a difference though. You've got loads.

http://pages.ebay.com/link/?nav=item.view&id=331675388710&globalID=EBAY-GB&alt=web

If you have a tow bar £30 to rent trailer. Lads called Chris 07588200767 http://pages.ebay.com/link/?nav=item.view&id=262075758023&alt=web I used it on Friday to pick up a GT.

Cheap starlet specific wheel spacers.

Found this on TGTT. http://www.toyotagtturbo.com/forums/showthread.php?41233-EP82-FCD-with-ext-harness Looks like it could be real and apparently in the Hyper Rev's book?

No its not soldered in it's part of the harness the harness is 100% part of the FCD. The sticker has air bubbles behind it. I've opened it up as it has 4 screws on the back. The 8 pin chip has had all the details sanded off it so it's unidentifiable as most Jap tuners do and has CEP-27 and 00251-02007 on the PCB there is a variable resistor in it for adjustment but is glued in position so you can't adjust it.

But its built into the harness. If it's a none branded why go to such quality in the build. I've Googled it and no info on it at all.