Rob H@RCH Engineering

Just one thing if the tires where starting to scrub off before you had the tracking done they will not stop scrubbing off even when you have had it done, only when you have had new tires fitted it will stop, once the have started wearing uneven they keep wearing uneven its just one of those things. So if it still does it dont think the tracking is still out.

yep it will fit fine you dont have to weld on the hanger but it does make it better and it stops the exhaust from twisting.

No there not the same, the N/A has the front hangers on the rear gear box mount and only one in the center of the car thats used as a earth strap or something, The glanza has non on the gear box mount and 2 mounts in the center of the car. I welded an extra mounting in the center of the car to mount my glanza Blitz nur spec to but it would work with out it. The one on the left of the pick is the one I had to weld on.

looking good mate! why dont ya cut all that lug off the turbo if your not going to use it for the waste gate it will look a lot nicer! in your VERY CLEAN bay. That post I put on FB wont work all that well with that rad lol dint realize you had a twin core rad I am still running the stock SR rad.

Prob the best 70 quid ever spent that book lol

yes theres 2 or 3 different marks on the gears but not all of them are used! here is the picks from the Toyota manual they should help!

Shot blasting wont affect anything in fact shot blasting/peening is used to strengthen steel components, just dont get it in anything that has oil/ water in it or in any moving parts that will cause megger problems! If ya need a hand with anything Rob I will be off work from satday and would be happy to help out!

Well our wedding will be 2 months after next years JAE!! good look phil!!

I will put mine up tomora!

FANTASTIC weekend!! Roll on next year!! cheers to all those that made it happen!

I've got a 12 hour night shift tonight, get home 7am wash & polish car first thing before the sun gets up, load up then get to bed for a bit till the missis gets home and then were off!!! I carnt wait its been so long since my last show about 8 years lol

This is my strum stick I got it just after I left school I am 32 this year lol and I bet its been used 2-3 times in the 10 years just carnt bring my self to part with it! It was the first thing I ever got on finance! Its a bit dusty lol I think if I leave it longer it will have its own jacket lol This is one I made while I was still at school used this quite a lot when I was having lessons. The skull was airbrushed by a mate that was doing airbrushing at collage at the time And my amp is a Peavey Bandit 112 thats well buried I aint going digging that out lol

I best go to the loo first as I guess a elephant will hang on need to go back to top to stop the racket!!!! ARRRR thats better now were was I o yes elephants will produce more than I can take if I dont go to the loo first!

I don't get out that much because I work nights, think I've seen yours go passed my dads before he owns the garage next to the speed camera at the beginning of the video.

Yep it is that!

The camera is smack under the filter lol

Cheers mate should be even better once we get the hi boost and the boost by gear sorted out!

Heres a quick video of mine, Greddy TD05 16G at 0.6bar 146WHP playing on the bypass <iframe width="640" height="480" src=&quot;http://www.youtube.com/embed/24Np1b4kRyA" frameborder="0" allowfullscreen></iframe>

In V8s we measure the mileage in SMILES to the gallon not miles!! thats why my V8 Landy has been parked up for the last 6 years lol thats only a 3.5l and does a wapping 12-15 mpg!!! but does lovely donuts and burn outs on 33 by 12 inch wide tires lol

We will be there early evening as the boss don't finish work till 5

Well I best put these on! still got hi boost to sort out once the fuel pump controller comes we can get it mapped and all the other bits set up like the traction control, launch control, anti lag and boost by gear, dont really need the anti lag as the TD05 is hitting full boost under 4000rpm but its there so may as well have it!!!

If the valves were recut or relapped they will need reshimming as the valve heights will have changed but if you have gone to the expense of all that work why would you not check them if the heads off anyway?

This int far off Barnsley talk lol shunt be too ard for me lol

O and I did manage 67 in a bendy bus going down a big hill it was fun but not something I would recommend lol they start to get a bit twitchy and so does your ass!!! I DO NOT CARRY PASSENGERS only work mates lol

fastest Ive been was as a passenger at 170mph and that was going down the slip road onto the motor way! We hit 160 before we got to the bottom lol this was in a EK9 turbo 406whp and it still had more!