Jump to content

mech5107

Member
 View Profile  See their activity

  • Content Count

    515

  • Joined

  • Last visited

Everything posted by mech5107

  1. mech5107
    What is the part number on both map sensors?
  2. mech5107
    How it is when is powered up? I mean button and screen colors
  3. mech5107
    Usually it's the same part number. So it should fit
  4. mech5107
    Then you need to check your inner bearing fitment.
  5. mech5107
    You used the ep82 axle or the stock ep70 axle?
  6. mech5107
    More specs on the wheels? What type are those, what offset?
  7. mech5107
    I had the same issue with rear disks. I did made the adaptor. 25mm inner to 27 outter diameter. What is the corsa gp you mention? Also Neil, what disks you have used?
  8. mech5107
    Anything till 200hp will not need bigger injectors. Maybe just slight increase in fuel pressure.
  9. mech5107
    Yes, you will just need to open up a bit the middle holes.
  10. mech5107
    Also noticed that there are no side spoilers? Why this?
  11. mech5107
    Nice! Are you gonna tune the 2etelu engine?
  12. mech5107
    Aftermarket mr2 turbo intercoolers look like this...
  13. mech5107
    The get easily to 230 HP, stock engine/turbo. Their traction control is not fully disabled, but when "off" and you do a drag launch, it acts like launch control and takes off really well.
  14. mech5107

    ep71

    mech5107 replied to nEP71n's topic in Northern Region

    TRD ecu is a stock ecu, made by denso, with an adjustment panel. It is connected to the ecu through a hole near the ecu connectors.
  15. mech5107
    Is your map sensor connected and working?
  16. mech5107
    You can get a civic type radiator, or a ep70 diesel starlet radiator. Also worth trying a low temp thermostat, like 76 degree s or so...
  17. mech5107
    Just for the lol, the oz wheels that evo 5 was rolling from factory were indeed enkei and not oz made. And look a lot like the wheels in question here...
  18. mech5107
    First check pads! Of worn change them. Then add fluid as needed.
  19. mech5107

    ep71

    mech5107 replied to nEP71n's topic in Northern Region

    There was a TRD ecu for ep71 and there was a series of knobs that adjusted boost fuel and ignition. You may have this ecu.
  20. mech5107
    19mm internal diameter.
  21. mech5107
    There is a list on gtt and tercel club. Look at the wiki section. But most high impedance denso injectors will fit.
  22. mech5107
    It's 2etelu, no pas or ac
  23. mech5107
    My mocal plate works just fine. Comes to temp in just 5-8klm daily commute. I have a celica gt4 cooler.
  24. mech5107
    Vacuum leak on a map equipped engine like starlets results to high idle, so that should be the problem.
  25. mech5107
    Watanabe have their stamp like black racing has this br stamp. Many companies do this design... Enkeiminilight, etc
×
×
  • Create New...