AdamB

Where do you find all these EP's lol.

Top man, I'll just go with Paisley then

Cheers mate, did drop you a pm as well

Cheers Jamie, I'll check them out Edit, just tried them and they won't touch it either, City Link's maximum is 2m

I'm having a bit of trouble finding a courier that will collect an exhaust system for me. ParcelForce says the dimensions exceed their services, and PaisleyFreight only allow up to 2.5m in length which this system exceeds by 0.1m. Anyone recommend any other couriers to try? Note it's only a 2 piece system rather than the usual 3 hence why it's so long in length. Thanks Adam

Yeah shorty was on a 4E. I don't see the need to go 75mm personally, the slightly increased engine capacity and compression ratio isn't worth it. You have to factor in that if anything goes wrong your screwed as you can't buy next size up off the shelf. Exactly the reason why YT is having to go upto 75mm because the bore was ruined.

Make it laggier mate.

205 will fit but I would go for 195/50, 45's are a bit killer imo make it quite rough to drive.

Top

Only the FHE has the cams with slightly more duration and lift. Yes your mpg will be worse, and you will probably gain about 10bhp at the top end at a push. I personally don't see the need to swap the stock cams, the limitations don't lay here.

Wouldn't even entertain the idea tbh. Starlets struggle to run a twin scroll td05 let alone a gt35 twice the size.

Dunno mate not my engine lol. I think theres 5 off the top of my head. You sure the starter has a good earth? Checked battery voltage? Sometimes using battery pack can kill a battery. So worth checking with a multimeter.

Check here http://www.toyotagtturbo.com/forums/showthread.php?100946-Tutorial-TPS-setup-Procedure-weeJohn-*

Sounds like your missing an earth mate.

Yeah its the ignitor, you won't need it if you switch to wasted spark/sequential ignition as long as the coil you use is a smart coil.

Try checking/setting the TPS mate

Toyota only mate. Imo its best to probably give the box a complete overhaul while its stripped.

If it pops out of gear sometimes it can be a worn selector fork, usually happens because people lean their hand on the gear stick and puts pressure on it.

Looking good mate. Scrap the dials though and just run a Toucan ;)

Pm'd mate

What power and boost you looking to run?

Shorty ran 75.5mm pistons so can't see 75mm being a problem mate. Only thing I would say though is that depending on the power your trying to achieve and the boost you run, you will require a certain amount of cylinder wall thickness or the cylinders will bow and you'll get poor ring seal and loss of power.

If its still here at the end of the month mate I'll come have a look

I thought you would buy this haha. Was looking at it myself but wanted to sell some of my parts first

Looking good mate, got quite a nice collection of parts growing