richardc9052

Yeah but with the 4cm housing is it not causing high pressure throttling meaning the engine has to work harder just to get the exhaust gasses out? The 4cm looks way too small. I might be wrong.. need to see it in person. If mine is 4cm and I dont like the size then we can deffo swap ;)

Kinda hope mines 6cm now lol

I tried led headlight bulbs. Absolute shite.

Nice one! You can have a tf0 fronted td04 too lol

It will be staying for now lol can't afford to upgrade it

Anyone who maps cars will map a det3. Software is free, usb comes with it, no special licence/fees etc for a business to map them.

I ran 4efe on ct9 and a hybrid both without an intercooler lol so if you want to talk about no lag hahaha Just hoping tf will be a decent jump from ct9 I will be running 0.8 on 100ps 4efe.

Whats it like

Not if you use a det3 ;) any rpm limit you want then lol

Yeah.... but I don't touch the fuse box lol. Just an extra single fuse. I do looms for lads putting fte in corollas ,ep70/80 or turboing fes

See when I take the box off I remove the sandwich plate and throw it away. Plenty of cars have the flywheel exposed. That means you can leave the cups in the box without having to avoid the plate. I also leave the mounts on the car with only the rear mount bracket on the box. If you let the engine hang down and more of an angle, nothing will get in your way.

You can run any turbo engine loom you want, just get matching sensors.. especially if your keeping the standard interior loom.

Use a capless bulb. Just bend the contacts down and put it in place of the fuse. It will light up to show something is shorting out. Then unplug everything one by one starting with the fuel pump. When the bulb goes out you have found the problem. Trace those wires until you find the damaged section and repair.

Fe turbo is awesome. End of lol. I did it to my 1e ep80 lol. Now that was quick because it was so light. Pulled on Ek4/ek9`s. Not a massive feat I know but a car standing me 800 vs theur car standing 5/6k+ lol

Just make sure if your getting another second hand clutch its not bent too. I think the cause is when you put the box on you where a bit rough and hit the body of the clutch disc with the splined shaft. I've done it before lol

Probably get a stock mani for free. Spend £15 on an ebay spec dremel Remove the restriction in 3rd runner. Get a cheap decat (ill sell you mine cheap) setup works mint at 0.6 on an efe. Will spike to 0.8 as the rpms climb which is perfect. Almost as if you did it on purpose ;)

1: Mani. Cheap. Dont care if its a cracked toyo one. Will buy with a decat if you must sell both but it better be cheap lol. Adapter plate? 2: Oil feed.

I was also bidding on two td04. One with play. Sold for £11. I bid 10, didnt want to risk more especially with the play bad enough to mention lots of it lol. Would have been handy for parts. Another one mint sold for £29. I only bid £26.. never mind!!

Now its obvious lol I feel like an idiot now haha

Can someone fill me in on the map printouts lol why are there two sheets? They look like two completely different cars. Lol

Thanks lads ill give it a shot tomorrow. 1 hour window a day and about 5 hours work left before test. Been a long 10 months lol

;) thanks for the tip Colin!

You dont need the gearbox just get the clutch and flywheel. Even turbo if anyone is breaking theirs. Should get them used for 50euro. Wouldnt pay much more.

You dont have to go there. They just sell them as well and have set them up before. Doesnt mean you cant go to your local tuner to take a look see if they will do it. At the end of the day, if I can fit one in my driveway and road map one myself I don't think a professional is going to have a problem doing it.. if the wont do it then they arent good enough at what they do or are tied into contract with another companies product line.

That looks off center Look at the didifferencenI space on each side from the main body to friction material.Its closer on the left. Buy a new clutch...