Glanza Mac Posted March 2, 2015 Author Share Posted March 2, 2015 Not at the minute, still need to source a downpipe, oil and water lines and a tial bovSome more progress has been made :-) Black braided fuel return pipe Aem fuel pressure regulator.. Doesn't fit due to my inlet so an adapter needs to be bought :-( Strut brace ends resprayed Nardi leather steering wheel bought from Lew777 :-) Not the best picture so will get a better one.Best progress is I have started the car as she lives again!Cv joints to be ordered today and then I can get it all back into one peice :-D Rob. Quote Link to post Share on other sites
Glanza Mac Posted March 9, 2015 Author Share Posted March 9, 2015 (edited) New mounts have arrived :-DHasports billet race mounts, u88a rating which hasport class as 'extreme race'.Strut brace back on after ends being painted The bay as it stands Some black Teflon an6 braided hose and black end finishers I do have some more to fit to the fuel pressure regulator but waiting for my adaptor to arrive.Few more bits to arrive and then I can rebuild the steering system/drivetrain and take her for a spin :-D Rob. Edited March 9, 2015 by Glanza Mac Quote Link to post Share on other sites
TimD Posted March 9, 2015 Share Posted March 9, 2015 Who put the engine in this, got any contact details? Quote Link to post Share on other sites
GlanzaJim Posted March 9, 2015 Share Posted March 9, 2015 This is quality would defo have a N/A with a b18 in it. Quote Link to post Share on other sites
Gainzy Posted March 9, 2015 Share Posted March 9, 2015 I'm excited! Quote Link to post Share on other sites
Glanza Mac Posted March 10, 2015 Author Share Posted March 10, 2015 I am excited too haha :-P just want all my parts etc to arrive :-DRob. Quote Link to post Share on other sites
TimD Posted March 10, 2015 Share Posted March 10, 2015 Found 'em https://www.facebook.com/pages/VDM-Motorsport/464426846954037 Quote Link to post Share on other sites
Glanza Mac Posted March 10, 2015 Author Share Posted March 10, 2015 Dave Vivian at Vdm :-) Rob. Quote Link to post Share on other sites
#TIDGEY Posted March 10, 2015 Share Posted March 10, 2015 Where did u get the carbon air duct dude ?? I've been looking for two for mY varis bumper ?? Awesome build some read Quote Link to post Share on other sites
Glanza Mac Posted March 11, 2015 Author Share Posted March 11, 2015 Thanks dude, it's called a billion carbon air duct, rhdJapan sell them Rob. Quote Link to post Share on other sites
5e colin Posted March 11, 2015 Share Posted March 11, 2015 nice updates but OOOOO man your gonna regret them stiff mounts they rattle your ride apart !!! Quote Link to post Share on other sites
Glanza Mac Posted March 11, 2015 Author Share Posted March 11, 2015 It already rattles as it is, along as it's all tight I'm not fussed :-P just glad it's not my daily haha Rob. Quote Link to post Share on other sites
#TIDGEY Posted March 11, 2015 Share Posted March 11, 2015 Thanks dude keep up the good work man I'm very jealous that b18 looks right at home ! Quote Link to post Share on other sites
Glanza Mac Posted March 12, 2015 Author Share Posted March 12, 2015 Cheers mate :-) Rob. Quote Link to post Share on other sites
Glanza Mac Posted March 13, 2015 Author Share Posted March 13, 2015 The hoses are here More to come tomorrow :-) Rob. Quote Link to post Share on other sites
Glanza Mac Posted March 15, 2015 Author Share Posted March 15, 2015 (edited) Bit more progress,Ngk iridium heat range 8 plugs bought and inCv joint bought and fitted Extended wheel studs bought, will be fitted at a later date4 new toyo t1r proxies bought and ffitted The new tyres on my new rims, unfortunately the weddsports have gone also :-( Team dynamics alloys with a large offset for the k sports to fit with no spacers :-) Sitting flush Pictures of the front will be taken :-) Engine bay as it stands nowFront bumper back on so it looks like a complete car again :-P Took the car for a drive up and down the street, wheel bearing on the passenger side front has gone and has alot of play in it making my caliper touch my wheel on the inside so new wheel bearing needs to be ordered and fitted, santa pod is 5 days away so no rush haha, pressure is on!Rob. Edited March 15, 2015 by Glanza Mac Quote Link to post Share on other sites
5e colin Posted March 15, 2015 Share Posted March 15, 2015 please make some onboard vids on the pod looking great Quote Link to post Share on other sites
Glanza Mac Posted March 17, 2015 Author Share Posted March 17, 2015 I don't think I'll be going down the strip due to it being a low compression motor with no turbo, it will be pretty slow :-P But I'll make some videos :-D Rob. Quote Link to post Share on other sites
Rich-k Posted March 17, 2015 Share Posted March 17, 2015 I don't think I'll be going down the strip due to it being a low compression motor with no turbo, it will be pretty slow :-P But I'll make some videos :-D Rob.Hahahahaha great honesty Quote Link to post Share on other sites
Glanza Mac Posted March 17, 2015 Author Share Posted March 17, 2015 No point lieing, the videos would tell the truth anyway :-P Rob. Quote Link to post Share on other sites
Glanza Mac Posted March 31, 2015 Author Share Posted March 31, 2015 Here's a few pictures from fast show @santapod Convoy With a friend's vAll polished upHey cheeky Our stand Rob. Quote Link to post Share on other sites
GlanzaJim Posted April 1, 2015 Share Posted April 1, 2015 Have you had a few runs with any of your mates ? How well does your car go? Quote Link to post Share on other sites
Glanza Mac Posted April 1, 2015 Author Share Posted April 1, 2015 Not really, went to pod and it's back in the garage haha, don't want to thrash the forged lump without a turbo as it's not built for n/a Rob. Quote Link to post Share on other sites
GlanzaJim Posted April 1, 2015 Share Posted April 1, 2015 Haha nice one. Thats true though. Very excited to see this with the tubby on Nice work, Quote Link to post Share on other sites
Glanza Mac Posted May 17, 2015 Author Share Posted May 17, 2015 Been quiet recently but I've just been busy with work etc Got a few bits coming my way for the beast Black Works Racing t3 4 bolt 3" downpipe to match the Black Works Racing Ramhorn manifold I also have a Tial 50mm blow of valve from socks coming my way Should be picking a 4 bolt garret gt35 exhaust housing to match the downpipe That's only a few bits from a huge list that I need Rob. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.