morgey

Yeah went last year so got the option for early bird tickets me and about 6 or 8 of us should be right near the front hopefully

How many bolts does it have, all 4 different Toyota wheels I've removed have only had 1 torques screw on each side :s Then the 19mm holding it on? Yes it will, you can buy or make a resistor pack to fool the system into thinking its still there as for mot the light must come on then go off as normal. Think its www.dashlightremoveal.com. or something similar supply them

I'll have some blue ones in about a week or so. Still in really good condition, used the ol plastic bag technique on removal

Them screws still hold it in you kinda need to pop them out a bit further then it should come out

2 torques screws 1 on either side, they don't cone all the way out just come loose. Once loose the airbag can be removed. Then its just the 17/19mm nut in the middle.

There is no off the market manifold back exhaust for n/a's you would need to get a full system made. The stock exhaust is in 3 parts Manifold Downpipe, cat, midbox all the way to the axle Backbox There's very few options for aftermarket manifold aswell obx and hotshots are about the only 2

Anybody hear about the guy in the news, threw away his harddrive with over £4mils worth of coins on it? Guess this is why you should keep a safe copy of your wallet pahahahaha

Ahh well if that's the bad point its nowt to worry about!

almost Enough time for a beer!

Going tomorrow at earls court in London Went last year and was epic!

Haha yeah it all works fine and has for some time now (touch wood) which is why I'm considering giving it a redesign. Better mounts mean less engine movement without the need for poly mounts therefore less vibration ;) All in the aid of drivability for me

Cheers man, yeah it is a bit tight but because I've got less in the bay its actually easier to work on than my ae111 trueno. Can do cambelts and gearbox changes with engine in the car and since there's no lower cradle bar like the trueno its actually easier! This could be done neater if we had had a mixture of 16v and 20v mounts to hand when we first did the swap!

Hahaha brilliant Also if this was a starlet with a jam/doobie/livesports badge on it you guys would be going nuts ;)

Gotta be down under that? Looks like a Ute in the clip of the video. Is a stunning looking car!

Mostly cars from old race series, wrc corolla and gt4, scoobs, evos. Dad telling me stories of skylines getting banded from tourin cars because they dominated etc etc

Blacktop 95k miles, also got a set of late spec 16v rods (same as silvertop) and 7 rib block with oil squirters.

Love it, got a lovely 20v that would go nicely in her ;)

Should have a corolla gti one, not sure if it will be the same or a slightly different as they have a slightly different bell housings. If you really are desparate I can fire it to you next day delivery for £12

Ill use mine if I feel like it but if I get rid of the trueno in good time ill be looking at swapping the LSD and getting an Mr2 ellecy pump fitted. Might even look at changing my engine mounts for the ones off of the trueno as they seem stiffer and a better design. But that's only if I can break the trueno in good time which atm isn't going to happen as my tools are shit and my motivation is non existant lol

I'd say gunmetal too, I've had white and after a while it grinds on ya. Somewhere I've pics of mine with both ill dig them out when I'm on the laptop in a bit

I hit a kerb sideways at about 50-60 it mine and its barely got a kerb mark, the front hit a sign sideways at about 15-20 and that seems fine too. I was genuinely surprised they hadn't cracked into a million bits lol

Not much else it could be if you can't find a leak

Haha if I strip it ill keep them for when it comes to sell it. And the mirrors I never bothered to wire up, but there is a guide on here in the how to section if you wanted to.

Poly filled starlet mount on the chassis, then the bracket onto the car was the C shaped bracket that bolts to the gearbox just with a plate welded to it to bring it back inline with the bolt holes then a couple of reinforcing braces for safety sake I would post a picture but my shitty HTC won't open the paste menu so I can't!!

I have a pair but they're a bit dull. And I think I sold the black plastic moulding that hold it in place No indicators though