morgey

honda b18c4's use a similar system to the acis system anyway. what you are on about its possible but it would be a complete redesign of the head, cams, camgears, timing belt setup. due the the system needing a pair of rocker arms the cams or valves will no longer be directly cam driven. both toyotas 2zzge vvtLi and mitsibushis Mivec system uses the 4 big and 4 small lobes system. the 2zzge also have vvti which makes it identical to I-vtec. e-vtec is basically vtec in reverse, you have 12 valves in use 90% of the time then when you boot it it locks in the final 4 valves, but there

i remember this without the kit but with a HUGE sun strip. this was the car that made me want a black SR

as if you're back! long time no see stranger! good luck on your hunt

mines the same mate, nowt u can do, i did read about some people making there own mounts by using poly fill stuff and if it was too stiff they drilled some holes in it. maybe something you could do to that mount if it really annoys you that much?

somewhere around here maybe on the A303 was a dark green N/a on speedlines and had a TTE spoiler. anyone on here? i was with a Red and white fiesta ST a black 2 door coupe trueno and a silver corolla.

its not the brake line brackets catching on one another is it? i know that BC and Meisters coilovers do this, maybe these do it too. failing that change your topmounts. I fitted corolla gti complete shock assembly on my newer corolla and they did this, i changed the shocks from the newer ones with the springs from the corolla gti and it solved my issue. however your rears should not make any noise and theres no turning motion.

Tbh it handles really well anyway. Sits on black wantanabes recaro interior etc could do with a tidy up but for 1k you cant complain

Mates got a 94 mitsi mirage cyborg. Around £1k but needs head gasket and water pump

Get a second diff as spare first. Replace the viscous coupling with a solid bar and weld the diff. My mate done it on his justy turbo and it works fine. Handles more power than a stock diff if its welded

Wait until next year and buy my Sr ;)

Caddy or ute is another couple or words.

There's 2 different types depending on year I believe. look what urs look like and order to suit

Yeah I know. I wouldnt own it. But for £600 hes got a 100hp motor you no what im saying. No fucks given thats not bad. If on the other hand its his pride and joy and hes really chuffed that hes done a good job etc then LMAO!

Not sure hows hes dealt with the fueling side of things, but if hes done this scrappy stylee and has made maybe 20-30hp and done it himself at the total cost of maybe £100-200 Fair play, I bet noone else on here has got a 30hp gain on an n/a for that little amount. Tbf I bet no1 has done it on a turbo for that lol

Haha good work

Got one in my town. Really is brilliant. Its just a shame the bloke who runs its a arrogant f*cktard who starts alienates all his customers by either starting arguments or making up prices. Anyway im sure your mates different and all the best with it.

Aint as big as a cow ;) haha

If you are careful and warm the paint up you can do it without it cracking

just seen these, might appeal to the JDM whores out there £250 for a pair of yellow trd harness's https://www.facebook.com/#!/photo.php?fbid=10153162140600051&set=pcb.10151669215650674&type=1&theater if it doesnt work theyre on the corolla club uk page on facebook being sold by Creg Robinson

you know it!

Is very impressive, 8-9 secs for an n/a is quick.

Miss banzia Tunnel runs a good laugh, about the only time you'll find me in london mainly because its about 2 in the morning and its empty where that goes. Give me the country side anyday

You guys should manage that. I got 14.9 with 131whp full interior and lsd. Managed 15.05 121whp full interior no lsd Could shed more off that with not being a noob off the line, low pressure tyres and stripped out

Not yet. Viewing this saturday, if its good ill be leaving a deposit and collecting the following week