Bean

good to see another been broken lol.

nova? what you on about geo? lol. yeah i always ment to get some vids but never get round to it. since the last drag racing i took the car for its mot (it passed) and ive not had it out since. theres another weekend of drag racing at kirkbride on the 19/20 may so it will be coming out for that. Ive been gathering bits up for a vtec swap and manual conversion for the civic. the ax is up for sale though it should go soon.

good man!!

i just realised i made a mistake and there weisco 74.5mm pistons not ross. to buy these pistons and rods new your looking at £800.

the acis is all setup to the be controled by the ecu but the car was spinning up on the dyno too much and he found it was spinning more when he was playing about with the acis. it needs to go back on the dyno when his 4wd dyno is finally built. So it is currently not in use.

paseo's are good for 2 things robbing 5e's and scrapping the rest!

x2!! no point running road tyres at pod! i got some federal rsr's for mine there cheaper than the 888 but they def have more grip than the t1r's

ok mate nice one.

i want everything to go together really mate

Item Condition: used Price and price conditions: £300 delivered Extra Info: these were in my old forged 4e, the engine did about 8k miles tops. then the bottom end went. one of the rods is obviously scrap. ive had the pistons checked over by an engine builder and machinist of over 40 years. He said the pistons are perfectly fine to re-use. the reason i got them checked was there is some slight scuffs on the skirts, he said its nothing to worry about and it just looks like the pistons from an engine which didnt run an air filter. pistons are weisco 74.5mm and scat rods. i have been keeping hold of these for a friend who planned to build an engine but hes dragging his feet so there up for sale. send the rods to scat get them to match another rod to the 3 and you have a full set ready to be built up. Pictures: Contact Details: pm post Location: Workington, cumbria

yeah it looks better in person, it was the most expensive colour they did! get it bought!

cheers guys the poor 5 hasnt moved in over 2 years now! engine went and its just sat since. my mate just wont sort it out but he would never part with it.

haha no worries, its really easy. it will put it together before i box it up if you like. i will send you a pm with my paypal is thats ok. ive got a zep sticker knocking about, you glanza boys seem to like stickers so you can have that too i just looked on rhd japan and there £171 new plus p+p!

Im having a big clearout, as well as starlet parts im going to let this go im afraid. Item Condition: probably the best ax gti you will find! Price and price conditions: £1450 Extra Info: heres my ax gti with only 50k miles! completly original. it must be one of the cleanest in the country. i very much doubt you will find a cleaner ax than this, never mind a GTI. This is also the pre cat model so slightly more bhp than the newer car gti cars. Im not sure where to start about the car, but the reason im selling is i have too many cars now and i need to make some room. the car is 100% original no modifications, never been messed with, never been welded (and doesnt need any) behind the headlights is a common area for these to go. the car must have been wax oiled early in its life as underneath the car is in exceptional condition. it has been maintained regardless of cost with full service history. the car drives how one of these cars should the suspension is nice and tight and the car performs great. it had a complete new exhaust system last year and not long before that new rear brake cylinders, shoes, discs and pads, hand brake cables. many more reciepts for recent parts also, best to ring for more information really. its just had loads of parts recently replaced including plugs leads crank sensor air intake sensor ecu temp sensor a saxo coil pack rocker cover gasket front drop links will come with 12 months mot and 6 months tax Pictures: Contact Details: pm, post or 07909337613 Location: Workington, Cumbria

For sale: powder coated 4efte inlet mani Item Condition: great! Price and price conditions: 50 delivered Extra Info: i had this powder coated with the rocker cover below it has silver in the paint and with the inlet been ast alloy you can still see through the powder coat to the alloy below, looks much better than the pics show. it has the odd little mark but nothing much. there no idle control valve ot intake temp sensor, i might be able to find some if your stuck but eay to swap over. Pictures: Contact Details: post or pm Location: workington Delivery & Conditions of Delivery: included in price. ireland will be a little extra i think. For sale: powder coated rocker cover Item Condition: good Price and price conditions: £55 delivered. Extra Info: same colour as the inlet above, good condition. the pic doesnt show how glossy the powder coat is looks better in real life. it has a small scratch as shown in the pic. looks good though! it had a new pcv valve and grommet after it was powder coated too and only did about 1k miles or less with it on. Pictures: heres the small scratch. the rubber washers and nut cover up where the cover bolts down. Contact Details: post or pm Location: workington Delivery & Conditions of Delivery: For sale: Zep racing jap engine torque damper Item Condition: used but good Price and price conditions: £65 delivered Extra Info: i bought this band new from RHD Japan Pictures: heres a pic of just the damper , the rose joints are still nice and smooth. theres a pic below showing it fitted, it comes with the blue powder coated mount on the strut tower and the spacer to go under the strut brace. and the blue powder coated piece which goes onto of the engine mount. im not sure if i will have the bolt which goes through the engine mount as you need one slightly longer than the stock one so you still have plenty of threads in the mount. Contact Details: pm or post Location: workington Delivery & Conditions of Delivery: included in price and heres a pic of everything fitted, a bit of common sense but make sure you give these a good wash out before fitting as they have sat about for a good while now!

just get some silicon vac pipe that fits onto the plastic pipe tight. cheaper than buying those blitz bits.

ive still got them

Sorry mate I've no use for it. Trying to have clear out and let go of some parts

should be a few there, i will be there in either my eg or a mates car, be good to see some starlets there. CWC26 Saturday 21st April Location: Morrisons Superstore Queen Katherine's Avenue Kendal LA9 6DU 7.30pm onwards

Item Condition: Great! Price and price conditions: £45 delivered Extra Info: i bought this ages ago but just after i bought it i also bought a trd quick shift so i used the trd one instead. im having a sort out so this is first to go! very rare these they dont come up often! from the jap starlet tuning wizards JAM! Pictures: Contact Details: post or pm Location: workington

I've still got em all but I hacked the front bumper to fit the hdi in it. I made a bit of a mess of it as I knew I wouldnt be needing it. It would be a bit of a mission to send unless you sorted your own courier. I have the front fogs for it too

na no debts or anything like that, if a decent house came up with a big garage i would buy it, nothing about round here though. the ax gti is a quality machine but it will be going. its so clean though! cant beat the old civics mate so much nicer to drive than the starlets and handle great. ive got some dc2 shocks and springs for it, the fronts are on but need the lca's to fit the rear ones. more bits on the way for it. my mates giving me a vtec lump to go in it too. i will be having clear out in the next week or so, should be a good few bits and pieces making their way into the forsale section.

Yep cam skill!

yeah alot of time has gone into it and some pile of cash! this and this ive got 4 cars atm and i think i need to thin back down! ive been spending a good bit of time fixing these up recently too

never heard of one. when i go in the shop they sometimes knock a bit off.