-
Content Count
1012 -
Joined
-
Last visited
Content Type
Profiles
Forums
Wiki
Media Demo
Store
Calendar
Everything posted by JayJ
-
Which way these should be installed into a rocker cover? There was a thread about this lately, but I can't find it now, so please link if you know the thread.
-
Genuine JAM Racing Plug & Play Performance ECU (EP91)
JayJ replied to Browner's topic in Starlet Parts For Sale
You can use this ecu with stock fueling -
Could you measure the outer diameter of efi pipes turbo end for me? Please? :-D
-
Could someone measure a efi pipe's outer diameter from the turbo end, thanks? :-)
-
I think you can go for 24mm. As long as the flap is bigger than the hole it should be ok, but measure the flaps diameter and check that it will close the hole completely.
-
Finally someone put the car in a good use Sorry, if this was already posted
-
It's pure luxury on a hot summer day when you can sit in the car and get it cool in a minute not forgetting demist on rainy/cold days. Also humming noise and breeze from the opened window is unpleasant. I'll try to cut the efi pipe and use a silicone joiner, because you failed to give better solutions
-
Monty's Glanza. New shoes :D 09/09/13
JayJ replied to monty1991's topic in EP91 Glanza Progress Blogs
"Turn up the boost they said...it will be fun they said" -
Nah, you haven't even missed it yet
-
When it's fixed?
-
Really don't want to do it although I have already read the guide and it's tempting
-
So, turbo(ct9) intake is 55mm and I don't want to remove AC, because car is in a daily use. Would it be possible to use a silicone joiner to connect efi pipe and turbo? What is the outer diameter(inside diameter is 40mm) of the efi pipe's turbo end? Second option is mesh, but in a daily use it will suck a lot of dust in or can I use some kind of filter in between two mesh, probably it will restrict the flow too much? Third option is replacing the efi pipe with silicone elbows and aluminium pipes, but is there enough room for this? Fourth, a smaller AC condenser? lol :-P
-
Pics for people, because I got nothing else to do This is for turning the boost down :-P Sandblasted JDM goodness, will be sprayed black soon. Anyone know the bottom bung thread size? CT9 ;-) Race spec
-
It's quite fast job to do as you take of the nuts and pull the distributor out. You have to mark the position though, as you might mess the timing. Check this out http://www.ukstarletowners.com/topic/9744-how-2-replace-distributor-seals/?hl=distributor :-)
-
Boooo, bad weather ruined my plans and I also forgot to order some important gaskets earlier. I was sure I had everything covered, but no. Anyway gaskets should be here on monday from Toyota, so let's hope the next weekend will be better. :-)
-
Great seller and good communication with daily replies. Also arranged courier from Ireland to Finland inmediately after payment. Well packed parcel, highly recommended
-
I collected the last three parcels today and I know you guys are impatient, so here's the content of one.
-
Try Forte or STP engine flush..or full forged rebuilt for peace of mind ;-)
-
Thanks, will get a better pic soon on sunlight. Dark don't really do justice :-)
-
Small bump! Snow is almost melted, so it's time to get my hands dirty on weekend. Thread's going picture heavy on friday! ;-)
-
http://www.ebay.co.uk/itm/TOYOTA-STARLET-GLANZA-EP91-EP82-5ZIGEN-BORDER-EXHAUST-/190810285958?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2c6d2de786
-
may be of interest to some1 on here.......
JayJ replied to PaulStarletSR's topic in eBay, BidJDM, Yahoo Auction Finds
Skirts still available http://www.ebay.co.uk/itm/Toyota-Starlet-Glanza-EP91-Sideskirts-Varis-GENUINE-New-item-/190822238213?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2c6de44805 -
CJP was removed from the trader section, but some topics have been moved to "starlet parts for sale" section, should it be like this or did something go wrong?
-
https://home.comcast.net/~ronald_miranda/hksactuator.pdf Good guide for setting up HKS actuator
-
Should be M12x1.25, but not sure