morgey

I dont think the whiteline bars are perfectly symmetrical. I had the same issue and it was catching in my exhaust tunnel so had to persuade the chassis to move a little bit.

I start work next week in a machine shop so was going to knock some bits up out of some nylon. Fairly simple bit of channel which is glued in place.

Usually around £100 they slide back and forward on runners and are removable as well. I do actually have one but half the runner is missing on one side so if moved forward to far it just comes out the runners. I was going to make a new one before selling it to stop that lol

It was an optional extra from factory. Has a metal bracket that goes under the oem center console and screws into the base of the armrest

Would be good to see a few locals down at this, usually picks up around 8pm nice range of cars with the americans coming along too. Its on the currys/mcdonalds retail park for anyone interested.

Yup. I took my whiteline arb off and put the stock back on as i didnt like the way it handled, i have seen people remove the plates under the ALK to solve it. That will remove some castor though.

Plugs And leads would be the obvious things to check. The other thing are you sure its not overboosting and hitting fuel cut? Oil issue sounds a bit like valve stem seals, in some cases you can pull off both manifolds and look at the valves, sometimes you will see some oil resisdue on them

Probably wouldnt matter looking at it as the hub and diff should be fairly parallel and not sure if C.V and U.V work differently but you get the idea https://youtu.be/Idk3BVDVHq4

Theres a good video thats worth watching explaning why you dont want angles on your driveshafts ill see if i can find it

Still on original joints from 2012, havent done a huge amount of miles but never thrown up any issues that im aware of.

I would say thats a better angle than mine, since i put the poly mounts in its pulled it further out as before they were sagging into a better position

Im afraid not, i did look but couldnt see any, ill see if i can get a pic tomorrow for you

In all honesty thats similar to my 4age starlet

I've seen worse if that helps lol

Finally cleared all the crap out of it today, pretty sure its ready for mot now. Got a couple of job interviews this week then should be a case of picking which one suits me best and then can get this on the road ready for JAE! I've also pulled half the old stickers off as some where missing letters and others discoloured. Not sure if im going to leave it plain or replace them yet...

I had my hopes up for this, on paper its really promising... until they announced the price and quantity. They aimed it at the fiesta ST but due to the cost and limited availability they've completely missed the mark. Its nearly £10k over the ST and hardly anyone can get their hands on them, whats the point?

Pretty sure theyre m-8. But the stock ones have a shoulder to locate the bonnet so its central.

Thinking i might keep my old doors and have dent devils or similar do some pdr on mine. So i fitted my recaro doorcard and carbon switches

Did you get the door looms as well ryan? As my sr was missing wires there aswell.

Approved with no picture as its free.

I just want to help people out, i know i need them so others must too. same with the Sr stickers i dont make F.A from them just like being able to sort people out who are in need

I can ask, have you got good clear pics and diamentions?

Give tapatalk a whirl mate its free and easy to use.

Pb have basically fucked the internet up lol. If on a phone id reccomend tapatalk, direct from phone uploads and very similar to the likes of facebook. Only takes a short while to get used to it and its a hub for loads of forums in one place. If on a laptop then imgur or tinypic still allow 3rd party hosting.

Basically im chatting to a guy that made some gel TTE badges for the yaris club, they look pretty decent and this got me thinking could you make a gel center for the old caps we have as most are knackered. It would mean removing your old corroded bit then sticking this back in its place. The caps are recessed about 1mm so i think a gel center would fill this quite well. In short im sending him a cap today and will see what he comes up with. If theyre any good and theres some interest i will probably buy a batch of them. Hes probably going to do 2 designs OEM and another lowercase style that some people might prefer. Not sure on pricing yet but id hazzard around £20-25 a set as his tte stickers were £3 each posted. Im not here to make money i know these are in demand as i need 8 myself and so does trevstar so im looking to help us all out. If people are interested just say and it will give me an idea of how many are needed initially. *this is not a group buy, ill fund the first lot myself.