adzy

Yeh better job, I'm not a fan of those dash dodger cages. I managed to keep the glovebox. But next on the list is attempt to make a new roof lining

Along way of your gt yet lol

Looking good mate! Had to make new doorcards for mine to fit with the cage

Good work mate!

No just a case of taking them of as they're just glued on. use a toffee wheel on a drill to remove any stubborn glue residue

Really improves handling and turn in, less understeer too. just be aware of lift of oversteer, although it can also be used to your advantage

233 bhp

No issues with standard clutch in mine. td04 @ 1bar

Mine started doing this when cruising, afr's kept creeping up until it would start misfiring. Unplugged the o2 sensor and it ran fine. Worth trying that and if it sorts it then just replace the sensor

Set of stealths on gumtree atm skiny

Could be your track rod ends arent centered. When I got my glanza I had terrible steering lock one way and so much the other way it rubbed.

Your membership has probably expired. usually catches me out, a notification when it expires would be handy

Welcome! Also from Northern Ireland

I used to get 300 miles from full until the last quarter in my old n/a starlet. now in the glanza I get about 160 miles from full to bottom quarter lol

Tgtt is only temporarily down until the domain is renewed. hopefully it's back up soon

Nice build socks. how do you find the civic rad for coolant temps? I struggled with mine on track, but like you was also seeing over 120 degrees oil. currently fitting an oil cooler so I'm hoping with 30 degrees or more pulled out of the oil should help the coolant. Also think my coolant was probably slightly too concentrated which would have led to poorer cooling.

Nice upgrades! Front end looks perfect now!

You can re use the bearings but when you there you might as well replace them. Same bearings as n/a starlet so cheap enough from motorfactors. Think I paid £13 a side for them

I thought this with my defi one, bought a universal one on eBay but it never goes above 25 degrees on the gauge. Defi one must be a different resistance or something

I just bought a new core for my td04. Cheaper than a rebuild and still has years warranty. Just don't buy Chinese crap

Good work ryan!

Mine broke about 2 years ago, got a fella I know to come and weld it on the car. Still holding strong. ask around for a local welder rather than a firm probably be cheaper

Don't forget we only get 97 ron fuel over here which makes a slight difference. i know another fella over here made around 260 at 1.5 bar standard td04

My aircon is removed so I went through the big rubber bit the ac pipes used to go through

Sounds like fuel cut, your probably only seeing it now with the cold temperatures, cold air is denser so you will make slightly more boost than a hot day etc, possibly just enough for you to hit fuel cut. you def need a boost gauge in these cars! Keep and eye on things