Sam44

I'm trying to find the build thread I read awhile ago describing the same issue and fix on a gt. From what I remember I think the loom has something to do with it also.

Yeh its a light weight low interia trd/exedy unit. They do this in both 212mm diameter or 200mm. I'm running the same unit.

Quite a bit of cement boil and the shroud is to black. What's your fuel pressure set to and I'd get the injectors cleaned. What boost pressure are you running. Which cylinder is the plug out of and are all the plug shroud this black.

What years are the GT turbos the ECU has come from and gone onto. I'd say possible difference in ECU pin outs.

Hello. Nice, clean starlet you have there. There is a lad on the site that does competition. I'll try and find his build thread for you.

https://www.demon-tweeks.com/uk/search/shop-by/q/Cosworth radiator cap/ Does anybody know if this cosworth rad cap fits the OEM standard toyota radiator. My hks cap is utter bulls#@t.

Was the rocker cover sand\shot blast cleaned before painting normally oven powder coat paint. If so the shot\sand and Powder get into and above the breather baffle plate. Or porting filings in the head journals. My turbo conversion died because of shot in the breather baffle because it had a powder coated rocker cover. Sorry to hear this.

Really nice stuff.

Not to sure on the face lift but I have a ep91 glanza 1997 I'm stripping for parts no engine. Here is some pictures. Your welcome. Hope these help. If you could put up pics of the later glanza v column I'm interested in the differences

Morning dutchie it's for the steering column adjuster handle.

Top work. Really looking good. Keep the progress pictures coming.

Now we are talking stoping power. Great upgrade.

Looking very good. Same clutch as mine. It's going to be good to see the ko4 in a 4e. Will you be running a fuel mix.

Yeh looks build for purpose. I like it.

Same here show quality I belive.

Great to see this build. You have a captive audience. Nice colour too.

Im at a cross roads\tipping point on my build and in need of Some information off any of you guys running 220hp+ on the 4e engine. I could do with some mpg figures as acreate as possible with turbo and ECU used Thank you in advance for the help. PM me them if you don't want to disclose this information to the public.

Yeh the aem does do this but it's not a faultless system by any stretch of the imagination this is because I'm running a cat for euro emissions standard. I need to keep the cat healthy and use the lamba and closed loop as much as I can (Road proformance) I've just finished fitting a det3 to a eg civic d16y8 engine running the later coil on plug loom ECU, on a turboed. I'm very impressed with it. If you need any help setting things up give us a shout. We use the pmw tables to activate the VTEC solenoid as it was also running a aftermarket cam. Great ECU this vehicle is logging data also onit.

I've added a screw in tube to the exhaust lamba\o2 flange, so only the very bottom of the standard 4efe O2 sensor sees the exhaust gas stream positioned in the standard 4efe ep91 exhaust location on the jap speed system. this creates a leaner reading from the 4efe O2 sensor so far it's working nice allowing the closed loop operation. I'm running a high flow proformance cat also on a aem piggy back ems. I'm data logging the O2 sensors voltage\lamba output. When mot time comes I remove the tube so the lamba sees the full stream. I hit a slight issue when I moved up to 1bar of boost pressure and a heat range 7 plug the co emissions jumped up so did the egt =increased unburnt fuel exiting the cylinder at levels that would reduce the cats in service lifespan.

Ooooor yehh fella. Looks smart.

I hope this can help, I'm just fitting one to a civic d16y8 turbo.

Nice. Thanks again for the information. It will be good to see the difference in times using the turbo gearbox and larger k04. Keep up the good work.

I'll check out the injector rate now. 650cc? Thanks for the reply. Am I right in thinking this is a td03? What boost pressure was you running? Great to see these 4efe boosted.

nice mod with the cams. The cam setup on the 4efe is very low rpm power orientated. Question: What kind of power figures did you get and what clutch? Keep the videos coming. Great to see some timed runs.

Brake bias valve Adjustable lever type & fitting