gorganl2000

well, i've ran emanage ultimate with 4efte electronics on a 5efte for over 10 years now,,,,had a td04L on at some point too.....so yeah, i know EMU works well with this set up i can't vouch for the EMB, but i suppose it should work as well...just EMU was an upgrade over the EMB, and not much different in pricing you can probably get either with a fields plug and play harness, boost sensor, etc in the sales section for a very reasonable price

my advice to you is to get it tuned and stay out of boost until you do. you need something that tunes both ignition and fueling...the 5e running with 4efte electronics works, but needs the tune (via piggyback or as you mentioned standalone) to get the maps in decent order, else you may get lean and detonation issues at various points in the low/mid rev range, though it may fuel rich in the high rpms if you put in larger injectors (lets say 330cc/360cc) with just the 4efte ecu, then the car will be inefficient if you retard the base timing to preempt detonation, the car will be

http://www.ukstarletowners.com/forum/7-wanted/ post there

so true....

maybe ecu/connection is causing your injectors to remain open or one is stuck? you will need to change your oil asap for sure do you have any diagnostic codes?

i've only ran an ultra racing one...for so long that i've forgotten when...maybe close to 10 years. never had any issue with it and made the car very stable. but its not adjustable, so you would need to choose the appropriate thickness to match what you want from the start or go with whiteline

best to drop russ a PM....or place a WTB ad or search the sales section

contact idrees or id-workz http://id-workz.co.uk/drivetrain/flywheel/flywheel-5e-conversion-starlet-ep82-91 is that what you are looking for?

1) i've always come along hearing they are non-inference ----ONCE its stock set up .....as in stock headgasket, no machine work, etc 2) which ever turbo you choose apart from stock ct9, you will need a manifold, downpipe, oil line, oil return, some kind of tuning/management, etc. to make it work is the land cruiser a diesel vehicle?...not sure about the size/flow of that turbo and how it would work with the 4efte,,,, may be on the small size of things if its from a diesel??

did he bridge te1 and e1 when setting the timing?

i'd suggest checking rhdjapan that is the last place i got some....was a long time ago and as stated above, they are very hard to find now

as the title says, looking to purchase a used and in good working condition power steering pump for a Toyota EP91 turbo glanza V. seller must be willing to ship/post you can respond here or via PM regards

run a diagnostic test for codes

can you may be wrap the inter-cooler pipe with heat reflective material?

as per your other tread, i ran a similar set up to what you have now, my silicon bend/hose touched the oil filter slightly if i ran the parallel to the ground, so i trimmed the hose/bend carefully and turned the filter set up slightly upwards to minimize any touching the filter itself never touched the oil filter---only the hose/bend

np...hope you get it sorted would send a picture from my phone, but unfortunately i'm not a paid member

i had the same issue a while back. i ended up getting a 90 degree bend/elbow to convert from 2.25" to 2.5", then used a 2.5" pipe (instead of the 50mm pipe you have there) and fitted a small 2.5" mushroom filter....just trim the pipe length to suit the space/filter accordingly....i reiterate, make sure the mushroom filter is the small type as the big mushroom filters may not fit (limited space) https://www.ebay.com/itm/2-5-MUSHROOM-STYLE-HIGH-FLOW-AIR-FILTER-WASHABLE-RACING-COMPACT-INTAKE-BLUE/272912904293?hash=item3f8ae07065:g:2wsAAOSwNkJaBkyQ&vxp=mtr something like that

are you sure a helicoil will hold that sort of torque/tension?? maybe some of the other technical members here can lend some insight in this matter i did use a helicoil to sort out an exhaust manifold/head stud a while back with great success, but i'm not sure about using it for headbolts

by any chance do you have them installed incorrectly?----long studs on short side and vice versa?

lol...i wonder myself, ..but that's one of those million dollar questions...if you get the answer, kindly let us know

may have to rig up some kind of "racing" rack to work....would be a lot of custom work

to the best of my knowledge, 200/220bhp is the most i remember being made on an auto ep82 that was a long time ago and the member's name slips my mind----you would need to be diligent with tranny oil changes and possibly a cooler would help found it----YBY was the name http://www.toyotagtturbo.com/community/index.php?threads/fastest-auto-starlet-glanza.9197/

not a lot of members run auto transmission to start with, so answers may be in short supply try a general search in google....maybe something related can be found in another model (corolla, etc)

from prior posts, there is no "quick" interchangeable rack

many thanks for your very informative response