TurboTobz

Awesome diff that, miss the clunky clonky

Long route comes out of turbo goes towards passengers side, down and under the car back towards drivers side then into the elbow then into the cooler, the short route goes from turbo down the elbow to intercooler

Daniel_g; I'm genuinely glad I wasn't consuming a beverage of hot tea at the precise moment I read the above comment regarding adhesives and brake pads. Good day.

Knock

They're just a generic solenoid, other boost controllers use the same thing, things like this are used for other applications within engineering, am sure you could source one that's not sold as a boost solenoid which would be cheaper, we use similar bits at work festo maybe a good place to start if your after something they may have something. Put electronic solenoid in ebay, you'll see the same ones used for other controllers.

http://www.ebay.co.uk/itm/Gizzmo-IBC-R-MS2-MS-IBC-IBC-3-Port-Electronic-Boost-Controller-Solenoid-Valve-/370935052929?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item565d73ba81

I miss mine! and my cusco 1.5 way

I want a ORC ogura 309 aswell!!

Seen a set of 4x100s once on fleabay

Fair play, tis a rare brace! Nice that, glwts

theres 2 locating pins on the comp housing side, the one I rotated needed one to be filed away and one was removed by popping it out with a pair of pliers and some force.

Should be some bolts or similar around the inside edge, remove them and any clamps, then a large cir clip for the compressor housing, and the v band style strap in the middle, a little bit of even tapping with a hammer around the exhaust side and it should come away, be careful that you don't attack one side more than the other and jimmy it off otherwise you may damage the fins.

That 85s crying out for a fwd conversion...

Been down my neck of the woods! Get some progress pics!

These were only clocked up entering and exiting the garage 5m also

I did have to really hold back on making a comment like this.

That's the kiddy, I remember exactly now!

I was under the impression you needed a specific power fc for ep8* or ep9* i maybe wrong though