Jump to content

TurboTobz

Member
 View Profile  See their activity

  • Content Count

    3964

  • Joined

  • Last visited

 Content Type 

Everything posted by TurboTobz

  1. TurboTobz

    Ogura Clutch set

    TurboTobz replied to zul_4E's topic in Wanted

    Awesome diff that, miss the clunky clonky
  2. TurboTobz
    Long route comes out of turbo goes towards passengers side, down and under the car back towards drivers side then into the elbow then into the cooler, the short route goes from turbo down the elbow to intercooler
  3. TurboTobz
    Daniel_g; I'm genuinely glad I wasn't consuming a beverage of hot tea at the precise moment I read the above comment regarding adhesives and brake pads. Good day.
  4. TurboTobz
    Knock
  5. TurboTobz
    They're just a generic solenoid, other boost controllers use the same thing, things like this are used for other applications within engineering, am sure you could source one that's not sold as a boost solenoid which would be cheaper, we use similar bits at work festo maybe a good place to start if your after something they may have something. Put electronic solenoid in ebay, you'll see the same ones used for other controllers.
  6. TurboTobz
    http://www.ebay.co.uk/itm/Gizzmo-IBC-R-MS2-MS-IBC-IBC-3-Port-Electronic-Boost-Controller-Solenoid-Valve-/370935052929?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item565d73ba81
  7. TurboTobz

    Ogura Clutch set

    TurboTobz replied to zul_4E's topic in Wanted

    I miss mine! and my cusco 1.5 way
  8. TurboTobz

    Ogura Clutch set

    TurboTobz replied to zul_4E's topic in Wanted

    I want a ORC ogura 309 aswell!!
  9. TurboTobz
    Seen a set of 4x100s once on fleabay
  10. TurboTobz
    Fair play, tis a rare brace! Nice that, glwts
  11. TurboTobz
    theres 2 locating pins on the comp housing side, the one I rotated needed one to be filed away and one was removed by popping it out with a pair of pliers and some force.
  12. TurboTobz
    Should be some bolts or similar around the inside edge, remove them and any clamps, then a large cir clip for the compressor housing, and the v band style strap in the middle, a little bit of even tapping with a hammer around the exhaust side and it should come away, be careful that you don't attack one side more than the other and jimmy it off otherwise you may damage the fins.
  13. TurboTobz
    That 85s crying out for a fwd conversion...
  14. TurboTobz
    Been down my neck of the woods! Get some progress pics!
  15. TurboTobz
    These were only clocked up entering and exiting the garage 5m also
  16. TurboTobz
    I did have to really hold back on making a comment like this.
  17. TurboTobz
    That's the kiddy, I remember exactly now!
  18. TurboTobz
    I was under the impression you needed a specific power fc for ep8* or ep9* i maybe wrong though
  19. TurboTobz
    Denso tape is amazing for preserving things in harsh environments, I used to use this on every hydraulic hose connection where I used to work as it was in a harbour, years old and as new…
  20. TurboTobz
    new solenoid costs 69 on ebay
  21. TurboTobz
    The best colour you mean It is absolutely mint mate!! Thanks pal, haha I can imagine they'd be a right bugger to get hold of!
  22. TurboTobz
    SHITELINE
  23. TurboTobz
    Yeah, I thought I recalled that leading down to the edges of the fuel tank as I said above, I really wouldn't worry! LOL
  24. TurboTobz
    If your worried about which ever one you get oxidising why not wrap it in denso tape?
  25. TurboTobz
    Yeah I'm sure under them are like the edges of the fuel tank sometimes you can see parts of the rear beam, just as you say to keep it water tight, I wouldn't worry too much
×
×
  • Create New...