5e colin
-
Content Count
6604 -
Joined
-
Last visited
Everything posted by 5e colin
-
nice 1 amigo hey i just spotted the wideband on the radio how did you secure it in place ??
-
thats freaking fast / make sure to prime her !!! could you measure the exhaust port and compressor port size want to compare to my tfo35hm cheeeeers
-
ya you will need them to and map sensor etc etc youd be better of doing 4efte looom swap al very simple then
-
you wont unles you splice in the external coil setup and 4efte dizzy 4efte ecu can not run na dizzy
-
cheapest in your local moterfactors kid go in and ask for corolla 4efe if they dont have starlet listed they will deffo have them listed for the corolla 4efe
-
have 1 ere whats it worth
-
yay great mate now keep the wepr kit that you have for sale and go td/vf/tf
-
amjad another thing i just thought of i know you said you changed the coil but did you change the igniter unit to thats bolted to the coil ?? i have seen them break before
-
set the fp to 3bar for 1 bar ct9 when engine is hot and take of the vacuum hose ( block the vacuum hose to )
-
Ryan Hone thats the fellas name whos selling it i cant link it
-
pm me your facebook name so i kan link u there
-
pat there is a wepr 1 on buy en sell on gaybay you want me to link you ?? its going for 100£
-
yes be gentle sticking the tip in dont touch the seal then a tap on the shaft with a rubber hammer or metal bar on inner cv joint tap
-
let me know your afrs at your .7/.8bar amigo i am running a glanza v ecu in my gtt and i cant go past 0.5 on my tfo ( why i have . for the higher limiter )
-
nooooo to much kid on my tfo 0.55bar is 13.5afr i had to turn boost down 2 turns no more then 0.5bar 0.4 be even safer now with this cold weather
-
Why dose my glanza v not let me past 4500 rpm??
5e colin replied to Essex glanza v's topic in Welcome New Owners!
you must be hitting fuel cut at 4500rpm whats your spec boost do eml test -
4E-FE choking at low RPM when reving (after engine bay wash)
5e colin replied to EP70-PT's topic in Ignition & Fueling
dry ignition leads and plugs on the dizzy they got water soaked and as the boys say down the sparky holes if there is water in it it will eventually dry out in time if left like this -
that graph dont even go to 7000rpm ??? our engines rev higher then that , does look impressive
-
are you on stock tdo4 and what pressure ??
-
Thinking of breaking my 5e forged glanza
5e colin replied to Rocheyglanza's topic in Lifestyle General
what is there only 3 99v micras left on the road ?? -
if the mounting points are the same where the bars connect then i dont see why not ??
-
everything is repairable just need to know how :)
-
"""" It was also suggested to swap out my Mine's ECU for a stock one, and that didn't make a difference. """" al p&p ecus for our cars have the stock code system build in its not altered
-
stock td04 is just to small for a 5e same as ct9 is to smal for the 4efte tdo4 will drop of top end limiter tdo5 will pull past the rev limiter
-
dont pay to much for them kid there just na cams in our turbo moters !!!