pick1 Posted April 10, 2013 Share Posted April 10, 2013 Shame about the mani cracking mate I'm sure I will get it sorted Quote Link to post Share on other sites
Socks Posted April 10, 2013 Share Posted April 10, 2013 ^^^ never herd of a wepr manifold crack :/ Really shocked to see a WEPR kit cracked think that's the first one ive seen. It defo a WEPR kit?? Google "WEPR Cracked"... To be honest tho, there are so many variables that could cause a manifold to crack, and as always Im sure Sacha will warrant them for repair for free! Car is excellent, hope you get it sorted! Quote Link to post Share on other sites
wickedep Posted April 11, 2013 Share Posted April 11, 2013 hey stefan,only happen to come across your thread now or else i would have contacted you sooner. yes, i am surprised as everyone else that one of our newer generation manifolds have cracked. this is the first sr-series manifold since its release couple of years back that has encountered a cracking issue. we are currently shut for our new year and re-open on the 22nd. if you can PM me your name/shipping address..i can have a new manifold shipped out to you once we re-open. will need a little bit of time for fabrication though. i apologize for any inconvenience this may have caused you mate. Google "WEPR Cracked"... To be honest tho, there are so many variables that could cause a manifold to crack, and as always Im sure Sacha will warrant them for repair for free! Car is excellent, hope you get it sorted! yeah we have had cracking issues with a lot of our first generation manifolds in the past..this is no secret and we've always honored our warranty. all the hits on google threads are of old first generation units that had an issues with cracking. this is not a very common occurrence at all with our new manifold designs which have been out now for couple of years Quote Link to post Share on other sites
akyakapotter Posted April 11, 2013 Share Posted April 11, 2013 hey stefan,only happen to come across your thread now or else i would have contacted you sooner. yes, i am surprised as everyone else that one of our newer generation manifolds have cracked. this is the first sr-series manifold since its release couple of years back that has encountered a cracking issue. we are currently shut for our new year and re-open on the 22nd. if you can PM me your name/shipping address..i can have a new manifold shipped out to you once we re-open. will need a little bit of time for fabrication though. i apologize for any inconvenience this may have caused you mate. yeah we have had cracking issues with a lot of our first generation manifolds in the past..this is no secret and we've always honored our warranty. all the hits on google threads are of old first generation units that had an issues with cracking. this is not a very common occurrence at all with our new manifold designs which have been out now for couple of years Top man sending new mani respect right there for you man Quote Link to post Share on other sites
pick1 Posted April 11, 2013 Share Posted April 11, 2013 ^^^ completely agree there's a man that is willing to stand by his product kudos to you dude Quote Link to post Share on other sites
maddox710 Posted April 11, 2013 Share Posted April 11, 2013 Wow thats awesome sacha Quote Link to post Share on other sites
Stefan_s Posted April 11, 2013 Author Share Posted April 11, 2013 hey stefan, only happen to come across your thread now or else i would have contacted you sooner. yes, i am surprised as everyone else that one of our newer generation manifolds have cracked. this is the first sr-series manifold since its release couple of years back that has encountered a cracking issue. we are currently shut for our new year and re-open on the 22nd. if you can PM me your name/shipping address..i can have a new manifold shipped out to you once we re-open. will need a little bit of time for fabrication though. i apologize for any inconvenience this may have caused you mate. yeah we have had cracking issues with a lot of our first generation manifolds in the past..this is no secret and we've always honored our warranty. all the hits on google threads are of old first generation units that had an issues with cracking. this is not a very common occurrence at all with our new manifold designs which have been out now for couple of years thank you, ill pm you my info now Quote Link to post Share on other sites
rossmc46 Posted April 11, 2013 Share Posted April 11, 2013 Where did you get the roll cage made would they do another ? Quote Link to post Share on other sites
bucketep91 Posted April 11, 2013 Share Posted April 11, 2013 Now thats what u call customer care! Quote Link to post Share on other sites
Liam_D Posted April 11, 2013 Share Posted April 11, 2013 hey stefan,only happen to come across your thread now or else i would have contacted you sooner. yes, i am surprised as everyone else that one of our newer generation manifolds have cracked. this is the first sr-series manifold since its release couple of years back that has encountered a cracking issue. we are currently shut for our new year and re-open on the 22nd. if you can PM me your name/shipping address..i can have a new manifold shipped out to you once we re-open. will need a little bit of time for fabrication though. i apologize for any inconvenience this may have caused youThat's customer service right there! Quote Link to post Share on other sites
Stefan_s Posted April 11, 2013 Author Share Posted April 11, 2013 Where did you get the roll cage made would they do another ?I got it made by someone local to me, they probably could make another but he would need your car there for measurements etc, I did have his number but got a new phone and lost it Quote Link to post Share on other sites
Stefan_s Posted May 6, 2013 Author Share Posted May 6, 2013 Got these bad boys through the post on Saturday Rear beam and panhard rod bushes, front bushes will be next Got this yesterday tooPassword Jdm tow hookAnd here's a pic from banzai day at crail Quote Link to post Share on other sites
rkane Posted May 6, 2013 Share Posted May 6, 2013 I came over and had a nose at your car yesterday man, seats are cool!I was parked over next to the fence with a rank subaru in front of me Quote Link to post Share on other sites
Stefan_s Posted May 6, 2013 Author Share Posted May 6, 2013 Was yours the silver one with white wheels? If it is then I got a pic of it lol Quote Link to post Share on other sites
rkane Posted May 6, 2013 Share Posted May 6, 2013 Yeah man!Those wheels are insanely rare, only set in the UK as far as im aware Quote Link to post Share on other sites
Stefan_s Posted May 6, 2013 Author Share Posted May 6, 2013 Yeah they looked cool Quote Link to post Share on other sites
rkane Posted May 6, 2013 Share Posted May 6, 2013 Cheers man, i'm waiting on all the pics of it gettin uploaded then i'll update my thread Quote Link to post Share on other sites
Stefan_s Posted May 19, 2013 Author Share Posted May 19, 2013 thought i should update this as a few things have happened in the past few weeks lol, first off i went to fit my poly bushes and a bolt snapped for the coilover which meant the bush was fucked so had to borrow stndard shocks off a mate while im waiting on a new bottom mount coming from bc racing as aparently you cant get the bushes seperatly, but it should be here on monday so hopefully get it sorted, then ill need to take it to a garage to get the bushes changed as we couldnt do it we managed to get the panhard rod ones done though. i also got a hks evc 3 very cheap and had a few problems setting it up but got it all set up now and it spools so much quicker than the manual boost controller http://s1222.photobucket.com/user/marbles1993/media/DSC_0411_zps7078ae61.jpg.html'> Quote Link to post Share on other sites
akyakapotter Posted May 19, 2013 Share Posted May 19, 2013 The evc's are a good bit of kit I have the next one up. savage one on snapping a bolt glad it's being fixed though. trying to get parts for coilovers it's a right ball ache I'm trying to get a top mount bearing at the monent proving difficult sbc setting can be fun 1.3 for 30s hehe Quote Link to post Share on other sites
Stefan_s Posted May 19, 2013 Author Share Posted May 19, 2013 I was actually wanting an avcr still do bit this popped up really cheap so just bought it lol I've not tried the sbc setting yet lol Quote Link to post Share on other sites
Stefan_s Posted May 20, 2013 Author Share Posted May 20, 2013 Got these back today from getting refurbed really happy with the way they've come out Thinking of getting some semi slicks for them and using them as track wheels Let me know what you think Quote Link to post Share on other sites
Liam_D Posted May 20, 2013 Share Posted May 20, 2013 They look great mate! Quote Link to post Share on other sites
wickedep Posted May 29, 2013 Share Posted May 29, 2013 mate, i should have your new manifold ready to go very shortly. i am in the process of doing a small batch of sr-series manis. your is included in this batch Quote Link to post Share on other sites
whitestar Posted May 29, 2013 Share Posted May 29, 2013 Oooh, I wanted the super advans too! Are they 16"? I'd love them in polished finish and 16". Actually made a mockup in photoshop with my car some time ago. Quote Link to post Share on other sites
Stefan_s Posted May 29, 2013 Author Share Posted May 29, 2013 mate, i should have your new manifold ready to go very shortly. i am in the process of doing a small batch of sr-series manis. your is included in this batch Thanks mate Whitestar my advans are 15" still need tyres before I try them on the car lol Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.